Comparison of Trial Restoration Matrix Fabrication Methods
NCT ID: NCT06912503
Last Updated: 2025-04-04
Study Results
The study team has not published outcome measurements, participant flow, or safety data for this trial yet. Check back later for updates.
Basic Information
Get a concise snapshot of the trial, including recruitment status, study phase, enrollment targets, and key timeline milestones.
COMPLETED
20 participants
OBSERVATIONAL
2023-01-08
2023-11-03
Brief Summary
Review the sponsor-provided synopsis that highlights what the study is about and why it is being conducted.
Methods: Patients (n=20) in need of anterior upper teeth aesthetic rehabilitation were recruited. Clinical and radiographic examinations, intraoral scanning, and dental CAD software were used to design a virtual diagnostic waxing. A 3D printed waxed cast was obtained, and four different matrices were fabricated. Trial restorations were performed using calibrated materials, and intraoral scans were taken for each restoration. Linear and volumetric discrepancies were evaluated using reverse engineering alignment software
Related Clinical Trials
Explore similar clinical trials based on study characteristics and research focus.
Evaluation of Occlusal Adjustment Material Removal on Monolithic Zirconia Blocks: An In Vitro Study
NCT07280130
Minimally Invasive Treatment of Worn Dentition With Innovative CAD-CAM Composites
NCT02828696
Color Stability and Wear Resistance of Direct Flowable and Preheated Composite Using the Injectable Technique
NCT06532916
Clinical Evaluation of Composite Restorations Using Two-steps Universal Adhesive in Non-carious Cervical Lesion (NCCL)
NCT05573243
PROMs Comparing Digital & Conventional Workflows
NCT04986761
Detailed Description
Dive into the extended narrative that explains the scientific background, objectives, and procedures in greater depth.
The patient recruitment was carried out among patients from the Clínica Universitaria Odontológica (CUO) in need of an aesthetic rehabilitation of the anterior upper teeth.
The inclusion and exclusion criteria of the sample were the following:
Inclusion Criteria
* Patients between 18 and 70 years old.
* Patients who maintain the six upper anterior teeth.
* Patients in need of an additive restorative rehabilitation. Exclusion Criteria
* Patients with removable prostheses.
* Patients with an absent upper anterior tooth.
* Patients with a buccal inclination of any of the six upper anterior teeth.
All the information of the study was delivered to the patients before signing and obtaining the inform consent form.
Study design Each patient underwent a primary diagnostic phase, which included clinical and radiographic examinations, extraoral and intraoral photography and intraoral scanning (IOS) (Trios3, 3Shape) to obtain standard tessellation language (STL) files. STL files were imported into a dental CAD (computed assisted design) software (Exocad DentalCAD; Exocad GmbH) to design a virtual diagnostic waxing for the 6 maxillary anterior teeth. The CAD design was performed by the same operator for each case and a resin-printed cast of the waxing was fabricated using additive manufacturing (AM) technology with a 3D printing machine (Phrozen Mini 4K, Phrozen Technology) using model resin (Aqua-Gray 4K printer resin, Phrozen Technology). The 3D printed waxed cast was introduced into an ultrasonic alcohol bath (96%) for 5 minutes, dried and cured in an ultraviolet curing chamber (7 minutes and 7 minutes submerged in glycerine gel) (Wash \& Cure machine 2.0, Anycubic 3D Printing).
Each diagnostic waxed printed cast was then digitized using the same intraoral scanning (Trios3, 3Shape) to obtain the reference model STL files used as control group for the study.
Four different types of matrixes were fabricated from the diagnostic waxing printed cast by the same operator: condensation silicone matrix, addition PVS-silicone matrix with external resin-based shell, transparent addition PVS-silicone matrix with external vacuum shell, and a CAD/CAM (computer assisted machining) combination matrix.
Condensation silicone matrix: base and catalyst paste, 85 Shore A (Zetalabor, Zhermack) were mixed and applied over the waxing printed cast ensuring an overall even distribution of the material buccally and incisally over the cast guaranteeing a minimal thickness of 8-10mm. The setting time advised by the fabricant was respected. After, the condensation silicone matrix was measured, marked and trimmed, using a dental model trimmer (Dual wheel dental model trimmer, Dentaurum Inc.) to obtain a 6 mm thickness of the matrix.
Finally, a vacuum shell was fabricated over the final volume of the condensation silicone matrix to replicate the material distribution and thickness for the fabrication of the other matrixes.
Addition PVS-silicone matrix: a two-step putty wash addition silicone technique was adopted using poly-vinylsiloxane material, 60 Shore A (Aquasil, Dentsply Sirona). First a spacer was applied over the printed waxed cast and the putty silicone was packed inside the previously fabricated vacuum shell. After the setting time advised by the fabricant, the matrix and the spacer were removed from the cast and the light silicone was poured to reline the waxed cast. Once set the PVS-silicone matrix was removed from the vacuum shell and the interproximal areas trimmed using a scalpel. Finally, a layer of resin-based shell (Triad light-curing trays, Dentsply) was applied and cured over the PVS silicone matrix.
Transparent addition PVS-silicone matrix: the PVS-silicone, 53 Shore A (Elite glass, Zhermack) poured inside the vacuum shell previously fabricated and relined over the waxed cast. After the setting time advised by the fabricant the cast was removed and a hole was performed incisally to each waxed tooth using a bur in order to insert a tip of flowable composite resin.
CAD/CAM combination matrix: First, a 3D printed resin matrix was designed (Exocad DentalCAD; Exocad GmbH) and printed (Phrozen Mini 4K, Phrozen Technology) using a clear biocompatible resin (Dental Clear, Harz Labs) providing a calibrated and equally distributed space for the PVS-silicone material, which reproduced the diagnostic waxed design. Later a low-shore PVS-silicone material, 60 Shore A (Aquasil light, Dentsply Sirona) was used to reline the AM matrix. The rigid matrix would guide the relining process thanks to dental-supported distal stops and buccal openings for visual assessment of proper fitting.
Auto-polymerization bisacrylic material (Luxatemp Star, DMG) was used to perform the trial restoration for condensation silicone matrix, addition PVS-silicone matrix with external resin-based shell and CAD/CAM combination matrix. Light-cured flowable composite-resin (Filtek Flow, 3M Dental Products) was used to perform the trial restoration for transparent addition PVS-silicone matrix. The rationale behind using different material stands on the material selection usually chosen by clinicians for each matrix.
In the same appointment 4 trial restorations were performed to each patient using the four different matrixes. The intraoral scan STL file, previously recorded in the diagnostic appointment, was duplicated and the area corresponding to the 6 anterior teeth was trimmed virtually, this procedure was executed 4 times. Each trial restoration was performed and then scanned over the trimmed STL files.
A total of 100 STL files were acquired. Four intraoral scans per group were obtained for each patient. The control group was the intraoral scan of the printed waxed cast which was used as a reference STL file.
The accuracy of each technique was calculated from the discrepancy between the IOS of each trial restoration scan and the reference STL.
Each trial restoration IOS (addition, condensation, clear, combined) was imported and aligned to the control reference STL cast of the waxed printed cast using the "best fit" algorithm of a non-dental reverse engineering software (Cx Geomagic Control X). Volumetric discrepancies, limited to the diagnostic waxing area, were measured using the RMS value. Linear discrepancies were calculated measuring the distance in 4 points (cervical, medial, lower medial and incisal) on the buccal aspect of each waxed tooth, from 13 to 23, between the trial restoration STL file and the control STL file.
All the measurements were recorded into an Excel page.
Statistical analysis After analyzing normality, Levene's test will be used to demonstrate wether there is a statistically significant difference amongst the measured linear and volumetric discrepancies' standard deviations (p\<0.05) or not. Non-parametric Kruskal-Wallis (K-W) and Mann-Whitney (M-W) tests will be performed to assess statistical differences in the linear and volumetric discrepancies in the studied groups Statistical significance will be set at p\<0.05 with a confidence interval of 95%.
Conditions
See the medical conditions and disease areas that this research is targeting or investigating.
Study Design
Understand how the trial is structured, including allocation methods, masking strategies, primary purpose, and other design elements.
CASE_CROSSOVER
PROSPECTIVE
Study Groups
Review each arm or cohort in the study, along with the interventions and objectives associated with them.
Condensation silicone matrix
base and catalyst paste, 85 Shore A (Zetalabor, Zhermack) were mixed and applied over the waxing printed cast ensuring an overall even distribution of the material buccally and incisally over the cast guaranteeing a minimal thickness of 8-10mm. The setting time advised by the fabricant was respected. After, the condensation silicone matrix was measured, marked and trimmed, using a dental model trimmer (Dual wheel dental model trimmer, Dentaurum Inc.) to obtain a 6 mm thickness of the matrix. Finally, a vacuum shell was fabricated over the final volume of the condensation silicone matrix to replicate the material distribution and thickness for the fabrication of the other matrixes.
Device to deliver trial restoration matrix
Auto-polymerization bisacrylic material (Luxatemp Star, DMG) was used to perform the trial restoration for condensation silicone matrix, addition PVS-silicone matrix with external resin-based shell and CAD/CAM combination matrix. Light-cured flowable composite-resin (Filtek Flow, 3M Dental Products) was used to perform the trial restoration for transparent addition PVS-silicone matrix. The rationale behind using different material stands on the material selection usually chosen by clinicians for each matrix.
In the same appointment 4 trial restorations were performed to each patient using the four different matrixes.
Addition PVS-silicone matrix
a two-step putty wash addition silicone technique was adopted using poly-vinylsiloxane material, 60 Shore A (Aquasil, Dentsply Sirona). First a spacer was applied over the printed waxed cast and the putty silicone was packed inside the previously fabricated vacuum shell. After the setting time advised by the fabricant, the matrix and the spacer were removed from the cast and the light silicone was poured to reline the waxed cast. Once set the PVS-silicone matrix was removed from the vacuum shell and the interproximal areas trimmed using a scalpel. Finally, a layer of resin-based shell (Triad light-curing trays, Dentsply) was applied and cured over the PVS silicone matrix.
Device to deliver trial restoration matrix
Auto-polymerization bisacrylic material (Luxatemp Star, DMG) was used to perform the trial restoration for condensation silicone matrix, addition PVS-silicone matrix with external resin-based shell and CAD/CAM combination matrix. Light-cured flowable composite-resin (Filtek Flow, 3M Dental Products) was used to perform the trial restoration for transparent addition PVS-silicone matrix. The rationale behind using different material stands on the material selection usually chosen by clinicians for each matrix.
In the same appointment 4 trial restorations were performed to each patient using the four different matrixes.
Transparent addition PVS-silicone matrix
the PVS-silicone, 53 Shore A (Elite glass, Zhermack) poured inside the vacuum shell previously fabricated and relined over the waxed cast. After the setting time advised by the fabricant the cast was removed and a hole was performed incisally to each waxed tooth using a bur in order to insert a tip of flowable composite resin.
Device to deliver trial restoration matrix
Auto-polymerization bisacrylic material (Luxatemp Star, DMG) was used to perform the trial restoration for condensation silicone matrix, addition PVS-silicone matrix with external resin-based shell and CAD/CAM combination matrix. Light-cured flowable composite-resin (Filtek Flow, 3M Dental Products) was used to perform the trial restoration for transparent addition PVS-silicone matrix. The rationale behind using different material stands on the material selection usually chosen by clinicians for each matrix.
In the same appointment 4 trial restorations were performed to each patient using the four different matrixes.
CAD/CAM combination matrix
First, a 3D printed resin matrix was designed (Exocad DentalCAD; Exocad GmbH) and printed (Phrozen Mini 4K, Phrozen Technology) using a clear biocompatible resin (Dental Clear, Harz Labs) providing a calibrated and equally distributed space for the PVS-silicone material, which reproduced the diagnostic waxed design. Later a low-shore PVS-silicone material, 60 Shore A (Aquasil light, Dentsply Sirona) was used to reline the AM matrix. The rigid matrix would guide the relining process thanks to dental-supported distal stops and buccal openings for visual assessment of proper fitting.
Device to deliver trial restoration matrix
Auto-polymerization bisacrylic material (Luxatemp Star, DMG) was used to perform the trial restoration for condensation silicone matrix, addition PVS-silicone matrix with external resin-based shell and CAD/CAM combination matrix. Light-cured flowable composite-resin (Filtek Flow, 3M Dental Products) was used to perform the trial restoration for transparent addition PVS-silicone matrix. The rationale behind using different material stands on the material selection usually chosen by clinicians for each matrix.
In the same appointment 4 trial restorations were performed to each patient using the four different matrixes.
Interventions
Learn about the drugs, procedures, or behavioral strategies being tested and how they are applied within this trial.
Device to deliver trial restoration matrix
Auto-polymerization bisacrylic material (Luxatemp Star, DMG) was used to perform the trial restoration for condensation silicone matrix, addition PVS-silicone matrix with external resin-based shell and CAD/CAM combination matrix. Light-cured flowable composite-resin (Filtek Flow, 3M Dental Products) was used to perform the trial restoration for transparent addition PVS-silicone matrix. The rationale behind using different material stands on the material selection usually chosen by clinicians for each matrix.
In the same appointment 4 trial restorations were performed to each patient using the four different matrixes.
Eligibility Criteria
Check the participation requirements, including inclusion and exclusion rules, age limits, and whether healthy volunteers are accepted.
Exclusion Criteria
* Patients with an absent upper anterior tooth.
* Patients with a buccal inclination of any of the six upper anterior teeth.
18 Years
70 Years
ALL
Yes
Sponsors
Meet the organizations funding or collaborating on the study and learn about their roles.
Universitat Internacional de Catalunya
OTHER
Responsible Party
Identify the individual or organization who holds primary responsibility for the study information submitted to regulators.
Principal Investigators
Learn about the lead researchers overseeing the trial and their institutional affiliations.
MIGUEL ROIG CAYON, MD, DDS
Role: STUDY_CHAIR
Universitat Internacional de Catalunya
Locations
Explore where the study is taking place and check the recruitment status at each participating site.
Universitat Internacional de Catalunya
Barcelona, BARCELONA, Spain
Countries
Review the countries where the study has at least one active or historical site.
Other Identifiers
Review additional registry numbers or institutional identifiers associated with this trial.
REST-ECL-2020-03
Identifier Type: -
Identifier Source: org_study_id
More Related Trials
Additional clinical trials that may be relevant based on similarity analysis.