MIH and Hypersensitivity in Children

NCT ID: NCT05705037

Last Updated: 2023-01-30

Study Results

Results pending

The study team has not published outcome measurements, participant flow, or safety data for this trial yet. Check back later for updates.

Basic Information

Get a concise snapshot of the trial, including recruitment status, study phase, enrollment targets, and key timeline milestones.

Recruitment Status

UNKNOWN

Clinical Phase

NA

Total Enrollment

39 participants

Study Classification

INTERVENTIONAL

Study Start Date

2022-01-10

Study Completion Date

2023-05-01

Brief Summary

Review the sponsor-provided synopsis that highlights what the study is about and why it is being conducted.

The aim of this study was to evaluate the efficacy of the association of casein phosphopeptide plus amorphous calcium phosphate (CPP-ACPF) mousse and photo-bio-modulation therapy (PMBT) (diode laser, RAFFAELLO 980 BIO - Dental Medical Technologies - DMT S.r.l.) in the treatment of dental hypersensitivity (DH) in children with Molar Incisor Hypomineralization (MIH) .

Children aged 6-14 years with hypersensitive teeth were randomized into 3 groups. Group A received the application of CPP-ACPF mousse (GC MI Paste®) and sham light therapy; group B got the application of placebo mousse (Elmex Junior®) and PMBT; group C received both CPP-ACPF mousse and PMBT.

Detailed Description

Dive into the extended narrative that explains the scientific background, objectives, and procedures in greater depth.

Three desensitizing treatment sessions for each group (group A, group B, group C) were performed with a 7 days-interval. The detailed protocol for each treatment is described below.

Group A (CPP-ACPF mousse + sham light therapy) CPP-ACPF mousse (GC MI Paste®) was applied with a microbrush on the cervical buccal surface of each tooth for 5 minutes and it was subsequently distributed for 20 seconds with a rubber cup coupled to a low speed handpiece. Right after, a sham therapy was performed, using RAFFAELLO 980 BIO - Dental Medical Technologies - DMT S.r.l. Although the device was switched on, the hand piece did not work and the sound was emitted by a mobile phone. The tip of the laser device was positioned on two areas for each dental element, located one in the center of the cervical region and the other in the middle third of the crown.

Group B (placebo mousse + PBMT) A placebo mousse (Elmex Junior®) was applied with a microbrush on the cervical buccal surface of each tooth for 5 minutes and it was subsequently distributed for 20 seconds with a rubber cup coupled to a low speed handpiece. Right after, a PBMT was performed, using RAFFAELLO 980 BIO - Dental Medical Technologies - DMT S.r.l. The tip of the laser device was positioned on two areas for each dental element, located one in the center of the cervical region and the other in the middle third of the crown. The parameters used were: wavelength 980 nm, power 4 W, irradiation area1 cm2, application time 15 sec per 1 cm2, energy density 60 J/cm2

Group C (CPP-ACPF + PBMT) CPP-ACPF mousse (GC MI Paste®) was applied with a microbrush on the cervical buccal surface of each tooth for 5 minutes and it was subsequently distributed for 20 seconds with a rubber cup coupled to a low speed handpiece. Right after, a PBMT was performed, using RAFFAELLO 980 BIO - Dental Medical Technologies - DMT S.r.l. The tip of the laser device was positioned on two areas for each dental element, located one in the center of the cervical region and the other in the middle third of the crown. The parameters used were: wavelength 980 nm, power 4 W, irradiation area1 cm2, application time 15 sec per 1 cm2, energy density 60 J/cm2

Conditions

See the medical conditions and disease areas that this research is targeting or investigating.

Dentin Sensitivity Molar Incisor Hypomineralization

Study Design

Understand how the trial is structured, including allocation methods, masking strategies, primary purpose, and other design elements.

Allocation Method

RANDOMIZED

Intervention Model

PARALLEL

Primary Study Purpose

TREATMENT

Blinding Strategy

DOUBLE

Participants Outcome Assessors

Study Groups

Review each arm or cohort in the study, along with the interventions and objectives associated with them.

Group A (CPP-ACPF mousse + sham light therapy)

CPP-ACPF mousse (MI Paste®) was applied with a microbrush on the cervical buccal surface of each tooth for 5 minutes and it was subsequently distributed for 20 seconds with a rubber cup coupled to a low speed handpiece. Right after, a sham therapy was performed, using RAFFAELLO 980 BIO - Dental Medical Technologies - DMT S.r.l. Although the device was switched on, the hand piece did not work and the sound was emitted by a mobile phone. The tip of the laser device was positioned on two areas for each dental element, located one in the center of the cervical region and the other in the middle third of the crown.

Group Type SHAM_COMPARATOR

CPP-ACPF

Intervention Type OTHER

CPP-ACPF mousse (MI Paste®) was applied with a microbrush on the cervical buccal surface of each tooth for 5 minutes and it was subsequently distributed for 20 seconds with a rubber cup coupled to a low speed handpiece. Right after, a sham therapy was performed, using RAFFAELLO 980 BIO - Dental Medical Technologies - DMT S.r.l. Although the device was switched on, the hand piece did not work and the sound was emitted by a mobile phone. The tip of the laser device was positioned on two areas for each dental element, located one in the center of the cervical region and the other in the middle third of the crown.

Group B (placebo mousse + PBMT)

A placebo mousse (Elmex Junior®) was applied with a microbrush on the cervical buccal surface of each tooth for 5 minutes and it was subsequently distributed for 20 seconds with a rubber cup coupled to a low speed handpiece. Right after, a PBMT was performed, using RAFFAELLO 980 BIO - Dental Medical Technologies - DMT S.r.l. The tip of the laser device was positioned on two areas for each dental element, located one in the center of the cervical region and the other in the middle third of the crown. The parameters used were: wavelength 980 nm, power 4 W, irradiation area1 cm2, application time 15 sec per 1 cm2, energy density 60 J/cm2

Group Type PLACEBO_COMPARATOR

PBMT

Intervention Type OTHER

A placebo mousse (Elmex Junior®) was applied with a microbrush on the cervical buccal surface of each tooth for 5 minutes and it was subsequently distributed for 20 seconds with a rubber cup coupled to a low speed handpiece. Right after, a PBMT was performed, using RAFFAELLO 980 BIO - Dental Medical Technologies - DMT S.r.l. The tip of the laser device was positioned on two areas for each dental element, located one in the center of the cervical region and the other in the middle third of the crown. The parameters used were: wavelength 980 nm, power 4 W, irradiation area1 cm2, application time 15 sec per 1 cm2, energy density 60 J/cm2

Group C (CPP-ACPF + PBMT)

CPP-ACPF mousse (MI Paste®) was applied with a microbrush on the cervical buccal surface of each tooth for 5 minutes and it was subsequently distributed for 20 seconds with a rubber cup coupled to a low speed handpiece. Right after, a PBMT was performed, using RAFFAELLO 980 BIO - Dental Medical Technologies - DMT S.r.l. The tip of the laser device was positioned on two areas for each dental element, located one in the center of the cervical region and the other in the middle third of the crown. The parameters used were: wavelength 980 nm, power 4 W, irradiation area1 cm2, application time 15 sec per 1 cm2, energy density 60 J/cm2

Group Type EXPERIMENTAL

CPP-ACPF+PBMT

Intervention Type OTHER

CPP-ACPF mousse (MI Paste®) was applied with a microbrush on the cervical buccal surface of each tooth for 5 minutes and it was subsequently distributed for 20 seconds with a rubber cup coupled to a low speed handpiece. Right after, a PBMT was performed, using RAFFAELLO 980 BIO - Dental Medical Technologies - DMT S.r.l. The tip of the laser device was positioned on two areas for each dental element, located one in the center of the cervical region and the other in the middle third of the crown. The parameters used were: wavelength 980 nm, power 4 W, irradiation area1 cm2, application time 15 sec per 1 cm2, energy density 60 J/cm2.

Interventions

Learn about the drugs, procedures, or behavioral strategies being tested and how they are applied within this trial.

CPP-ACPF

CPP-ACPF mousse (MI Paste®) was applied with a microbrush on the cervical buccal surface of each tooth for 5 minutes and it was subsequently distributed for 20 seconds with a rubber cup coupled to a low speed handpiece. Right after, a sham therapy was performed, using RAFFAELLO 980 BIO - Dental Medical Technologies - DMT S.r.l. Although the device was switched on, the hand piece did not work and the sound was emitted by a mobile phone. The tip of the laser device was positioned on two areas for each dental element, located one in the center of the cervical region and the other in the middle third of the crown.

Intervention Type OTHER

PBMT

A placebo mousse (Elmex Junior®) was applied with a microbrush on the cervical buccal surface of each tooth for 5 minutes and it was subsequently distributed for 20 seconds with a rubber cup coupled to a low speed handpiece. Right after, a PBMT was performed, using RAFFAELLO 980 BIO - Dental Medical Technologies - DMT S.r.l. The tip of the laser device was positioned on two areas for each dental element, located one in the center of the cervical region and the other in the middle third of the crown. The parameters used were: wavelength 980 nm, power 4 W, irradiation area1 cm2, application time 15 sec per 1 cm2, energy density 60 J/cm2

Intervention Type OTHER

CPP-ACPF+PBMT

CPP-ACPF mousse (MI Paste®) was applied with a microbrush on the cervical buccal surface of each tooth for 5 minutes and it was subsequently distributed for 20 seconds with a rubber cup coupled to a low speed handpiece. Right after, a PBMT was performed, using RAFFAELLO 980 BIO - Dental Medical Technologies - DMT S.r.l. The tip of the laser device was positioned on two areas for each dental element, located one in the center of the cervical region and the other in the middle third of the crown. The parameters used were: wavelength 980 nm, power 4 W, irradiation area1 cm2, application time 15 sec per 1 cm2, energy density 60 J/cm2.

Intervention Type OTHER

Eligibility Criteria

Check the participation requirements, including inclusion and exclusion rules, age limits, and whether healthy volunteers are accepted.

Inclusion Criteria

* children 6-14 years old
* having at least one MIH-affected tooth and MIH-associated hypersensitivity.

Exclusion Criteria

* allergy to milk proteins
* chronic diseases,
* carious lesions on the sensitive teeth
* restorations on the sensitive teeth
* other enamel defects (fluorosis, amelogenesis/dentinogenesis imperfecta…)
* presence of orthodontic appliance
* recent anti-inflammatory or cortisone therapies
* recent desensitizing treatments.
Minimum Eligible Age

6 Years

Maximum Eligible Age

14 Years

Eligible Sex

ALL

Accepts Healthy Volunteers

Yes

Sponsors

Meet the organizations funding or collaborating on the study and learn about their roles.

Università degli Studi di Brescia

OTHER

Sponsor Role lead

Responsible Party

Identify the individual or organization who holds primary responsibility for the study information submitted to regulators.

Elena Bardellini

Associated Professor

Responsibility Role PRINCIPAL_INVESTIGATOR

Principal Investigators

Learn about the lead researchers overseeing the trial and their institutional affiliations.

Elena Bardellini, AP

Role: PRINCIPAL_INVESTIGATOR

Università degli Studi di Brescia

Locations

Explore where the study is taking place and check the recruitment status at each participating site.

Dental Clinic

Brescia, , Italy

Site Status RECRUITING

Countries

Review the countries where the study has at least one active or historical site.

Italy

Central Contacts

Reach out to these primary contacts for questions about participation or study logistics.

Elena Bardellini, AP

Role: CONTACT

+390303995780

Facility Contacts

Find local site contact details for specific facilities participating in the trial.

Elena Bardellini, AP

Role: primary

+390303995780

Other Identifiers

Review additional registry numbers or institutional identifiers associated with this trial.

MIH-2020.1

Identifier Type: -

Identifier Source: org_study_id

More Related Trials

Additional clinical trials that may be relevant based on similarity analysis.