The Fat Analysis Trial (FAT) - Assessing the Impact of Lipo-aspirate Processing

NCT ID: NCT05318716

Last Updated: 2022-04-08

Basic Information

• Recruitment Status: UNKNOWN
• Clinical Phase: NA
• Total Enrollment: 200 participants
• Study Classification: INTERVENTIONAL
• Study Start Date: 2022-07-31
• Study Completion Date: 2025-07-31

Brief Summary

Fat grafting has been gaining popularity over the past decade. It is now commonly used for breast augmentation and reconstruction, however a major challenge remains the high rate and unpredictable rate of fat resorption post-operatively, leading to volume loss and patient dissatisfaction. Currently there is no consensus on the ideal technique to process donor fat to minimize the rate of resorption. Our study aims to compare two common processing methods to determine if one is superior for fat volume retention.

Detailed Description

Fat grafting is a technique used commonly in plastic surgery that has gained popularity in breast augmentation and breast reconstruction. This technique involves harvesting fat using liposuction from donor sites, processing the extracted fat and re-injecting it back into the breast for the desired volume and shape. Fat grafting has gained popularity due to its resulting natural appearance and feel. This technique can also be used in conjunction with implant reconstruction to achieve a more natural contour and symmetry. However, the main issue is a low rate of fat retention, which, based on the literature, is inconsistent and only an average of 60% of the volume of fat injected. Furthermore, there are very few clinical studies studying the long-term clinical survivability of the grafted fat. Therefore, care must be taken in setting patient expectations, and sometimes multiple sessions are required to achieve the desired results.

There are currently multiple techniques used in harvesting and processing fat for grafting, and it is unclear in the current literature if the processing technique used affects the level of fat resorption. General principles of fat grafting include gentle extraction to avoid damage and processing to remove excess infiltration fluid and impurities before injection. The fat is collected from donor areas for extraction, using either manual or power-assisted liposuction. For processing, several products and processing solutions have been developed in recent years, including the Revolve system (AbbVie/Allergan), which is currently used at our institution. Prior to these systems, simple decantation of fat by gravity or centrifugation was used. However, due to damage to fat during processing and lower retention rates in the literature, centrifugation has largely been abandoned as a processing method. However, there is no standard method of donor fat harvest or processing, and there is a lack of well-defined prospective clinical studies comparing popular techniques in the current literature, particularly in the long term. Additionally, the amount of fat injected and patient factors such as previous radiation can affect the amount of fat retention. Further in-vitro studies are required to clarify factors that affect fat survivability.

In order to assess the rate of fat retention in the breast, quantitative imaging tools have been validated in the literature. One of the most popular techniques is 3D body surface scans. These can be taken easily, quickly, and cost-effectively for volume assessment at various time points pre and postoperatively. Comparatively, MRI imaging is costly, time-consuming and therefore not practical for frequent follow-up. Furthermore, as 3D imaging becomes more accessible, its use could become more common in clinical practice for preoperative planning and objective assessment of outcomes.

Methods Aims Currently, there is a lack of prospective clinical studies directly comparing the rate of fat graft retention between processing techniques. Our primary outcome aims to compare two common processing methods; decantation and the Revolve system. Investigators will measure the retention rate using 3D imaging techniques (Vectra H2, Canfield), in the place of traditional 2D photography, for quantitative measurement of breast volume. Our secondary outcomes include the assessment of operating time, cost, and collect secondary outcomes related to surgical complications and outcomes. Investigators will tangentially perform a qualitative review of the patient's pre and post-operatively using the validated Breast-Q questionnaire. This study will be conducted at LHSC sites in London, Ontario.

Conditions

Breast Asymmetry; Fat Atrophy

Study Design

• Allocation Method: RANDOMIZED
• Intervention Model: PARALLEL
• Primary Study Purpose: TREATMENT
• Blinding Strategy: DOUBLE

Study Groups

Reconstructive group

This group of patients would be undergoing fat grafting following implant-based reconstruction. We will be excluding patients that have had autologous based reconstruction, including regional and free flaps. This group will be analyzed based on volume (\<200cc or 50% and \>200cc or 50%) as well as subgroup analysis based on adjuvant chemo or radiation therapy.

Group Type: EXPERIMENTAL

Fat grafting - Revolve device

Intervention Type: DEVICE

Standardized fat collection The donor areas previously agreed on by the patient and surgeon for fat harvesting will be injected with pre-standardized formulae and volume of tumescent fluid, and fat will be extracted using a standardized harvesting method between surgeons. Once the fat is collected. It will then be processed in one of two ways depending on the patient's group, using a Revolve system or via decantation. Fat will then be injected into the breast using a 10 or 20cc syringe in the standard retrograde manner to achieve the desired size and shape. A standard gauze-based dressing will be applied post-operatively, with no compression.

Fat grafting - Decantation

Intervention Type: DEVICE

Standardized fat collection The donor areas previously agreed on by the patient and surgeon for fat harvesting will be injected with pre-standardized formulae and volume of tumescent fluid, and fat will be extracted using a standardized harvesting method between surgeons. Once the fat is collected. It will then be processed in one of two ways depending on the patient's group, using a Revolve system or via decantation. Fat will then be injected into the breast using a 10 or 20cc syringe in the standard retrograde manner to achieve the desired size and shape. A standard gauze-based dressing will be applied post-operatively, with no compression.

Cosmetic augmentation group

This group of patients will be undergoing a primary or secondary augmentation for cosmesis. They will be included if this is a primary augmentation using fat grafting or a secondary augmentation with no history of fat grafting to the breasts.

Group Type: EXPERIMENTAL

Fat grafting - Revolve device

Intervention Type: DEVICE

Standardized fat collection The donor areas previously agreed on by the patient and surgeon for fat harvesting will be injected with pre-standardized formulae and volume of tumescent fluid, and fat will be extracted using a standardized harvesting method between surgeons. Once the fat is collected. It will then be processed in one of two ways depending on the patient's group, using a Revolve system or via decantation. Fat will then be injected into the breast using a 10 or 20cc syringe in the standard retrograde manner to achieve the desired size and shape. A standard gauze-based dressing will be applied post-operatively, with no compression.

Fat grafting - Decantation

Intervention Type: DEVICE

Standardized fat collection The donor areas previously agreed on by the patient and surgeon for fat harvesting will be injected with pre-standardized formulae and volume of tumescent fluid, and fat will be extracted using a standardized harvesting method between surgeons. Once the fat is collected. It will then be processed in one of two ways depending on the patient's group, using a Revolve system or via decantation. Fat will then be injected into the breast using a 10 or 20cc syringe in the standard retrograde manner to achieve the desired size and shape. A standard gauze-based dressing will be applied post-operatively, with no compression.

Interventions

Fat grafting - Revolve device

Standardized fat collection The donor areas previously agreed on by the patient and surgeon for fat harvesting will be injected with pre-standardized formulae and volume of tumescent fluid, and fat will be extracted using a standardized harvesting method between surgeons. Once the fat is collected. It will then be processed in one of two ways depending on the patient's group, using a Revolve system or via decantation. Fat will then be injected into the breast using a 10 or 20cc syringe in the standard retrograde manner to achieve the desired size and shape. A standard gauze-based dressing will be applied post-operatively, with no compression.

Intervention Type: DEVICE

Fat grafting - Decantation

Standardized fat collection The donor areas previously agreed on by the patient and surgeon for fat harvesting will be injected with pre-standardized formulae and volume of tumescent fluid, and fat will be extracted using a standardized harvesting method between surgeons. Once the fat is collected. It will then be processed in one of two ways depending on the patient's group, using a Revolve system or via decantation. Fat will then be injected into the breast using a 10 or 20cc syringe in the standard retrograde manner to achieve the desired size and shape. A standard gauze-based dressing will be applied post-operatively, with no compression.

Intervention Type: DEVICE

Eligibility Criteria

Inclusion Criteria

• Any patient above the age of 18 undergoing fat grafting from any donor site to the breast for cosmetic or reconstructive purposes.
• We will accept patient who have an implant for either cosmetic or reconstructive purposes

Exclusion Criteria

• Previous fat grafting
• Autologous breast reconstruction (regional or free flap)
• unable to consent to the study

• Minimum Eligible Age: 18 Years
• Eligible Sex: FEMALE
• Accepts Healthy Volunteers: Yes

Sponsors

London Health Sciences Centre Research Institute OR Lawson Research Institute of St. Joseph's

OTHER

Sponsor Role: lead

Responsible Party

Tanya DeLyzer

Associate Professor, Division of Plastic and Reconstructive Surgery

Responsibility Role: PRINCIPAL_INVESTIGATOR

Central Contacts

Tanya DeLyzer, BSc MD FRCSC

Role: CONTACT

carrie.deer@lhsc.on.ca

519.685.8108

Khalifa AlGhanim, MD

Role: CONTACT

khalifa.alghanim@lhsc.on.ca

Other Identifiers

11811

Identifier Type: -

Identifier Source: org_study_id