Effectiveness of Rotating System and Single File Reciprocating System in Temporal Molars
NCT ID: NCT04793477
Last Updated: 2024-04-05
Study Results
The study team has not published outcome measurements, participant flow, or safety data for this trial yet. Check back later for updates.
Basic Information
Get a concise snapshot of the trial, including recruitment status, study phase, enrollment targets, and key timeline milestones.
RECRUITING
NA
60 participants
INTERVENTIONAL
2021-05-01
2024-07-01
Brief Summary
Review the sponsor-provided synopsis that highlights what the study is about and why it is being conducted.
Related Clinical Trials
Explore similar clinical trials based on study characteristics and research focus.
Instrumentation Time Efficiency and Histologically the Debriding Efficacy.
NCT03770754
Efficacy of Laser Doppler Flowmetry as a Diagnostic Tool in Assessing Revascularization of Traumatised Teeth
NCT04967456
Comparison of Different Methods of Enamel Preparation Before Pit and Fissure Sealants
NCT02594020
Tooth Wear Monitoring Using Intraoral Scanner
NCT05843513
Dentine Tubule Occlusion Assessment in a Modified in Situ Model
NCT02768194
Detailed Description
Dive into the extended narrative that explains the scientific background, objectives, and procedures in greater depth.
The clinical study and data collection will be obtained by the second year students of the master's degree in Pediatric Dentistry. All of them will receive the same practical and theoretical training on the treatment to be performed, and will be calibrated by the principal investigator. The procedure and the data obtained will be reviewed by a trained investigator and blinded with the type of procedure used.
Children from 4 to 8 years old will be selected to visit the Clinica Universitaria de Odontología (CUO) with the master's degree in Pediatric Dentistry. A sample of 60 children will be taken. There will be three study groups, where 20 subjects will be assigned to each, estimating a follow-up loss ratio of 20%.
Once the patient is selected, they will be assigned to one of the groups in order of arrival. For example, patient one will be assigned in group 1, patient two in group 2, patient three in group 3 and so on.
There are 3 study groups groups: Group 1, with Manual instrumentation with K files (Dentsply Caulk, Milfors, DE, USA); group 2, with the VDW.ROTATETM (VDW, Munich, Germany); and group 3, with Reciproc® Blue (RCP, VDW, Munich, Germany) system.
A preliminary clinical and radiographic examination with periapical radiographs will be performed. To anesthetize the tooth, the student will use topical anesthesia (Urricaine gel, Clarben SA Laboratories) and local anesthesia with articaine 4% 1:200,000 epinephrine (Ultracaine; Normon S.A., Madrid, Spain) using a lower alveolar nerve block. The student will work with absolute isolation with rubber dam. The cavities will be removed with a high-speed diamond ball cutter and once the operator are inside the pulp chamber, will continue to remove the coronal pulp with a endo-Z cutter.
The operator will determine the working length (LT) with the Gold Reciproc motor (VDW, Munich, Germany), using K #15 file. LT is to be determined it at 1 mm less than what the locator indicates due to the physiological reabsorptions present in the tooth. Each group will be instrumented according to the manufacturer's instructions, explained above. The duct permeability will be ensured with K #10 file with between files and at the end of the instrumentation. The duct irrigation was carried out with 5ml of 2,5% NaOCl in each duct and a side outlet needle. In the case of group 3, which is a single lime system, the operator will take into account that the irrigation must be similar to that of the other systems.
Once the instrumentation is finished,the elapsed time will be recorded from the beginning to the end of the instrumentation with the disinfection of the appropriate irrigant. The operator will record the minutes and seconds evaluated with an analog stopwatch. The ducts will be dried with sterile paper tips and place the sealing material, calcium hydroxide with iodophormic paste (Vitapex; Neo Dental International Inc., Federal Way, WA, USA). The sealing material will be placed with the applicator tip that comes with the product and at the end we will compact the sealing with a cotton ball in the chamber. The application material procedure will be carried out in this way, to know if the success of the sealing depends on the system of files used. The tooth will remain with a temporary Eugenol Zinc Oxide (IRM; Dentsply Caulk, Milfors, DE, USA) filler until the next visit, which will be a week later, to place a stainless steel crown (3M ESPE, St. Paul, MN, USA) cemented with glass ionomer cement (Ktac-Cem;3M ESPE, St. Paul, MN, USA).
To finish the treatment, a periapical radiography will be done to the patient. With the final periapical radiography, a researcher blinded to the study groups, will evaluate the quality and quantity of the seal without the need for auxiliary elements such as léntulos or files. The filling will be evaluated if it's optimal, under-filled, over-filled or with the presence of gaps.
To determine the patient's anxiety during dental treatment, the operator will use a pulse oximeter (digital Onyx, NONIN, Plymouth, MN, USA). The child's heart rate will be evaluated in the following moments: 3 min before the application of topical anesthesia, at the topical anesthesia aplication, during the application of the local anesthetic, when the rubber dam is placed, during the instrumentation and removal of coronal pulp tissue, during the instrumentation with each file system, and finally when the rubber dam is removed. The average heart rate will be determined for each period by a set of values in a period of 1 minute.
At the end of the treatment the operator will evaluate the behavior of the child with the Frankl scale where 1 is very uncooperative and 4 is very collaborative; and will see if it is similar to the behavior of previous visits with conservative treatment.
To determine the ease of operation, a numerical scale from 0 to 10 is will be used, where 0 means very easy to use and 10 very difficult. It will be taken into account that if there are more than one operator, they have the same acquired skills and the same familiarity with the file systems used.
In the evaluation of postoperative pain, that same day the patient's parents will be given a questionnaire where the parents will have to write down at 6, 12, 24, 48, 72 hours and a week later, the pain felt. The pain will be evaluated with the Wong-Baker scale because facial scales are usually easier for the pediatric patient. All patients will be given a 2% junifen prescription with a weight-appropriate dose in case of postoperative pain. Parents will be advised that the prescription should only be used in cases of more severe pain, and will need to be noted on the data collection sheet. When these patients need taking medication, the marked value at the Wong-Baker station will not be taken into account. It will be noted that they are patients who have required medication. The operator will collect the data a week, coinciding with the stainless steel crown placement.
All the data obtained from the patients participating in the study will be recorded in two sheets: One for the operator, where the age, sex, the assigned study group, and all the variables studied will be recorded: instrumentation time, filler quality, operator's ease, behavior and anxiety of the patient; The other sheet will be for parents to record at home the postoperative pain felt by the child.
Statistical analysis will be caried out with Statgraphics Plus 5.1 version and Microsoft Excel.
An absolute and relative frequency shall be used in categorical variables to describe the data. For the numerical variables the mean and standard deviation or median and first and third quartile will be used, depending on whether the data is parametric or not. To be able to make comparisons between files, the Chi-square T will be used for categorical variables and the T-student or Mann Whitney test for numerical variables. The SHAPIRO WILKS contrast will be used to compare the normality of the data.
For this study, a 95% confidence interval is to be taken into account, taking as statistically significant reference a p value ≤ 0.05.
Conditions
See the medical conditions and disease areas that this research is targeting or investigating.
Study Design
Understand how the trial is structured, including allocation methods, masking strategies, primary purpose, and other design elements.
RANDOMIZED
PARALLEL
TREATMENT
DOUBLE
Study Groups
Review each arm or cohort in the study, along with the interventions and objectives associated with them.
K files (Dentsply Caulk, Milfors, DE, USA)
Instrumentation with manual files shall be performed with balanced forces (Roane) technique consist of placing the instrument as apically as it can go and then turning it clockwise (less than 180º). This is followed by a counterclockwise rotation (of at least 120º) with slight apical pressure. This is repeated until the desired working length is obtained.
instrumentation technique in pulpectomies
comparison of three file systems for pulpectomies in primary molars
VDW.ROTATE (VDW, Munich, Germany).
Instrumentation with VDW.ROTATE files shall be performed with a glide path to WL using VDW.ROTATETM 15.04 until reaching working length (1.3cNm and 300-400 rpm), the next instrument in the sequence is VDW.ROTATETM 20.05 until reaching working length (2.1cNm and 300-400rpm). and finally instrument with VDW.ROTATETM 25.04 (2.3cNm and 300-400rpm)
instrumentation technique in pulpectomies
comparison of three file systems for pulpectomies in primary molars
Reciproc® blue (RCP, VDW, Munich, Germany)
Instrumentation with Reciproc blue files shall be performed with only one file and move it in a pecking motion (the amplitude will not exceed 3mm). All the instruments shall be cleaned after 3 pecks.
instrumentation technique in pulpectomies
comparison of three file systems for pulpectomies in primary molars
Interventions
Learn about the drugs, procedures, or behavioral strategies being tested and how they are applied within this trial.
instrumentation technique in pulpectomies
comparison of three file systems for pulpectomies in primary molars
Eligibility Criteria
Check the participation requirements, including inclusion and exclusion rules, age limits, and whether healthy volunteers are accepted.
Inclusion Criteria
* Radiographic absence of external or internal pathological reabsorption.
* Absence of interadicular radioluscience and/or periapical lesion.
* Temporary teeth with at least 2/3 of the root intact or a minimum root length of 8mm.
* Remaining dental structure sufficient for the subsequent placement of a stainless steel crown.
* Children who have already undergone some previous restorative treatment in the Department of Pediatric Dentistry.
Exclusion Criteria
* Have taken analgesics or anti-inflammatories in the last 12 hours.
* Very uncooperative patients, who require some type of anxiety to be treated.
* Patients with systemic diseases.
* Patients with special needs.
4 Years
8 Years
ALL
Yes
Sponsors
Meet the organizations funding or collaborating on the study and learn about their roles.
Universitat Internacional de Catalunya
OTHER
Responsible Party
Identify the individual or organization who holds primary responsibility for the study information submitted to regulators.
Francisco Guinot-Jimeno
head of the department of pediatric dentistry
Locations
Explore where the study is taking place and check the recruitment status at each participating site.
Universitat Internacional de Catalunya
Sant Cugat del Vallès, Barcelona, Spain
Countries
Review the countries where the study has at least one active or historical site.
Central Contacts
Reach out to these primary contacts for questions about participation or study logistics.
Facility Contacts
Find local site contact details for specific facilities participating in the trial.
Other Identifiers
Review additional registry numbers or institutional identifiers associated with this trial.
UIC-ODP-LIMAS
Identifier Type: -
Identifier Source: org_study_id
More Related Trials
Additional clinical trials that may be relevant based on similarity analysis.