Measuring Apical Debris Extrusion With a Novel Laboratory Technique
NCT ID: NCT07341451
Last Updated: 2026-01-14
Study Results
The study team has not published outcome measurements, participant flow, or safety data for this trial yet. Check back later for updates.
Basic Information
Get a concise snapshot of the trial, including recruitment status, study phase, enrollment targets, and key timeline milestones.
COMPLETED
NA
80 participants
INTERVENTIONAL
2025-09-29
2025-11-30
Brief Summary
Review the sponsor-provided synopsis that highlights what the study is about and why it is being conducted.
During root canal instrumentation, there is a risk of necrotic debris, microorganisms, and dentin particles being displaced through the apical foramen into the periapical tissue. This displacement can increase the risk of infection and lead to postoperative complications. The preservation of the apical foramen is one of the most critical stages in the endodontic treatment process. Materials that extrude beyond the apical foramen can cause irritation and inflammation in the alveolar bone. This situation may exacerbate postoperative pain and discomfort, negatively affecting the patient's satisfaction with the treatment. Additionally, such displacements can compromise the overall success of the procedure by increasing the risk of reinfection. Therefore, preventing these displacements during root canal shaping is a factor that directly influences the success of the treatment.
In the literature, precision scales are commonly used to measure the materials displaced from the apex. However, there are discrepancies regarding the reliability of these scales, particularly concerning their measurement accuracy for very small quantities. It has been observed that these precision scales may not provide sufficient accuracy in certain situations, making it challenging to accurately determine the amount of extruded materials. This issue poses a significant barrier to the assessment of endodontic treatment outcomes. Consequently, there is a need for the development of existing measurement methods and the exploration of alternative approaches. The integration of new technologies for measuring the quantity of extruded materials could enhance the understanding and management of treatment processes.
In this context, the primary aim of this research is to develop new methods for the more accurate and reliable measurement of materials displaced from the apex. Novel measurement techniques will allow for a more precise determination of the quantity of extruded materials, thereby enhancing the efficacy of endodontic treatment processes. Furthermore, this research aims to contribute to the reduction of postoperative complications and improve patient satisfaction during the treatment process. Ultimately, innovative approaches of this nature are of great importance for the success of endodontic treatments and patient satisfaction. Research in the field of endodontics will not only guide clinical practices but also make significant contributions to the scientific literature. Such innovations will assist in the development of future treatment protocols and the enhancement of patient care.
Related Clinical Trials
Explore similar clinical trials based on study characteristics and research focus.
Effect of Different Apical Actions on Local Inflammatory Mediators and Pain
NCT06760312
Clinical Investigation of Chemomechanical Parameters for an Efficient Disinfection of the Root Canal
NCT06949176
Effect of Different Apex Locators on Postoperative Pain in Endodontic Retreatment of Single-Rooted Teeth: Prospective Randomized Clinical Study
NCT06964490
Post-endodontic Access Cavity Cleaning Techniques
NCT06937424
A Study to Compare Various Root Canal Cleaning Devices Based on Cavitation,Ultrasonic and Conventional Methods.
NCT06005545
Detailed Description
Dive into the extended narrative that explains the scientific background, objectives, and procedures in greater depth.
The purpose of this study is to develop alternative and reliable measurement methods for quantifying solid and liquid substances unintentionally extruded from the apical foramen during endodontic treatment with higher precision. The investigators will assess the limitations and applicability of the proposed methods, which are expected to contribute to future treatment improvements. The study also aims to evaluate the potential of these methods to reduce postoperative pain and infection risks in clinical practice. This research is anticipated to make significant contributions to enhancing the effectiveness and reliability of endodontic treatment processes.
This in vitro study was designed to evaluate the amount of apical extrusion (debris and irrigation solution overflow) occurring during root canal treatment. A total of 80 extracted human lower premolar teeth, selected according to predefined criteria, were used. The primary objective was to compare the effects of two different rotary file systems-ProTaper Gold and ProTaper Next-on the amount of apical overflow.
Selection and Preparation of Specimens
The specimens consisted of extracted lower premolars with fully developed roots, a single canal, a single apical foramen, moderate root inclination, and no previous endodontic treatment. Root canal inclination angles were determined using the Schneider method, and only specimens with inclinations between 5° and 20° were included to better simulate clinical conditions. Teeth with multiple apical foramina, cracks, or fractures were excluded following examination under magnification. The criteria of single root and single canal were verified radiographically.
Disinfection and Preparation
Teeth were disinfected in 5% sodium hypochlorite for 10 minutes, rinsed with distilled water, and stored in physiological saline. Standard endodontic access cavities were prepared, and canal orifices were identified using an endodontic explorer. Pulp remnants were removed with hand files. The working length was standardized to 0.5 mm short of the anatomical apex for all specimens.
Root Canal Preparation and Standardization
Initial shaping was performed with a ProTaper Gold S1 file using the manufacturer's recommended speed and torque settings. Irrigation with 2 ml sodium hypochlorite was applied during instrumentation. Specimens in which a #20 K-file could pass through the apical foramen were excluded to maintain standardization.
Chromium-cobalt particles were compacted into the canals to assess the apical extrusion of debris radiographically. The particles were inserted using an excavator and pluggers, ensuring homogeneous distribution. After radiographic confirmation, each specimen was placed into the experimental setup.
Experimental Setup
Each tooth was mounted on an acrylic block with its apical region in contact with a moisture-absorbing sponge that simulated periodontal tissues. This setup provided a radiolucent background for the radiographic detection of extruded materials and allowed fluid absorption, enabling blinded assessment.
Groups and Experimental Procedure
Eighty specimens were randomly assigned into four groups (n = 20) as follows:
Group 1: Debris overflow - ProTaper Gold
Group 2: Debris overflow - ProTaper Next
Group 3: Solution overflow - ProTaper Gold
Group 4: Solution overflow - ProTaper Next
Access cavities and pulp chambers were left unsealed to reflect clinical conditions.
Debris Overflow Groups (Groups 1 and 2) Root canals were instrumented to working length using ProTaper Gold or ProTaper Next files. Irrigation with 2 ml NaOCl was performed at each file stage, followed by a final rinse with 6 ml NaOCl for 3 minutes. Extruded particles were visualized radiographically and quantified using ImageJ software.
Solution Overflow Groups (Groups 3 and 4) To opacify irrigation solutions, barium sulfate powder was added to NaOCl and EDTA. The canals were instrumented with ProTaper Gold or ProTaper Next systems using these opacified irrigants. The amount of extruded solution was recorded radiographically and analyzed in ImageJ.
Data Collection and Analysis
Digital radiographs of all samples were obtained at a standardized 15 cm distance. The radiographs were evaluated blindly, and the surface area and density of extruded opaque materials were measured as percentages. Data were recorded in Excel spreadsheets and prepared for statistical analysis.
Contribution of the Study
This study introduces a novel radiographic approach for assessing apical extrusion. The use of chromium-cobalt particles and barium sulfate-enhanced irrigants enables objective visualization of extruded material, while the moisture-absorbing sponge system effectively simulates periodontal conditions. The findings are expected to facilitate the comparison of rotary file systems in terms of apical extrusion and to support the development of more reliable and clinically applicable endodontic procedures.
Conditions
See the medical conditions and disease areas that this research is targeting or investigating.
Study Design
Understand how the trial is structured, including allocation methods, masking strategies, primary purpose, and other design elements.
RANDOMIZED
PARALLEL
BASIC_SCIENCE
SINGLE
Study Groups
Review each arm or cohort in the study, along with the interventions and objectives associated with them.
ProTaper Gold - Debris Extrusion
Extracted mandibular premolars shaped with ProTaper Gold rotary files.
Apical extrusion of debris measured using chromium-cobalt particles.
ProTaper Gold Rotary File System
Root canal instrumentation performed using ProTaper Gold rotary file system at working length. Files were used in sequence (S1, F1-F3) following the manufacturer's instructions for torque and rpm. Irrigation was performed with NaOCl during shaping
ProTaper Next - Debris Extrusion
Extracted mandibular premolars shaped with ProTaper Next rotary files.
Apical extrusion of debris measured using chromium-cobalt particles.
ProTaper Next Rotary File System
Root canal instrumentation performed using ProTaper Next rotary file system at working length. Files were used in sequence (X1-X3) following the manufacturer's instructions for torque and rpm. Irrigation was performed with NaOCl during shaping
ProTaper Gold - Irrigant Extrusion
Extracted mandibular premolars shaped with ProTaper Gold rotary files.
Apical extrusion of irrigant measured using barium sulfate-enhanced NaOCl.
ProTaper Gold Rotary File System
Root canal instrumentation performed using ProTaper Gold rotary file system at working length. Files were used in sequence (S1, F1-F3) following the manufacturer's instructions for torque and rpm. Irrigation was performed with NaOCl during shaping
ProTaper Next - Irrigant Extrusion
Extracted mandibular premolars shaped with ProTaper Next rotary files.
Apical extrusion of irrigant measured using barium sulfate-enhanced NaOCl
ProTaper Next Rotary File System
Root canal instrumentation performed using ProTaper Next rotary file system at working length. Files were used in sequence (X1-X3) following the manufacturer's instructions for torque and rpm. Irrigation was performed with NaOCl during shaping
Interventions
Learn about the drugs, procedures, or behavioral strategies being tested and how they are applied within this trial.
ProTaper Gold Rotary File System
Root canal instrumentation performed using ProTaper Gold rotary file system at working length. Files were used in sequence (S1, F1-F3) following the manufacturer's instructions for torque and rpm. Irrigation was performed with NaOCl during shaping
ProTaper Next Rotary File System
Root canal instrumentation performed using ProTaper Next rotary file system at working length. Files were used in sequence (X1-X3) following the manufacturer's instructions for torque and rpm. Irrigation was performed with NaOCl during shaping
Eligibility Criteria
Check the participation requirements, including inclusion and exclusion rules, age limits, and whether healthy volunteers are accepted.
Inclusion Criteria
Exclusion Criteria
ALL
No
Sponsors
Meet the organizations funding or collaborating on the study and learn about their roles.
necmettin erbakan university Scientific Research Projects (BAP)
UNKNOWN
Fatma Selenay Ucas Yildiz
OTHER
Responsible Party
Identify the individual or organization who holds primary responsibility for the study information submitted to regulators.
Fatma Selenay Ucas Yildiz
Research Assistant and Principal Investigator
Principal Investigators
Learn about the lead researchers overseeing the trial and their institutional affiliations.
Arslan Terlemez, DDS, PhD
Role: STUDY_DIRECTOR
Necmettin Erbakan University, Faculty of Dentistry, Department of Endodontics
Locations
Explore where the study is taking place and check the recruitment status at each participating site.
Necmettin Erbakan University Faculty of Dentistry
Konya, , Turkey (Türkiye)
Countries
Review the countries where the study has at least one active or historical site.
Related Links
Access external resources that provide additional context or updates about the study.
Other Identifiers
Review additional registry numbers or institutional identifiers associated with this trial.
23068
Identifier Type: OTHER
Identifier Source: secondary_id
2025/539
Identifier Type: -
Identifier Source: org_study_id
More Related Trials
Additional clinical trials that may be relevant based on similarity analysis.