A Clinical Trial on the Failure Rates of Metallic and Ceramic Orthodontic Brackets

NCT ID: NCT05151991

Last Updated: 2024-01-17

Basic Information

• Recruitment Status: COMPLETED
• Clinical Phase: NA
• Total Enrollment: 80 participants
• Study Classification: INTERVENTIONAL
• Study Start Date: 2021-12-09
• Study Completion Date: 2023-05-08

Brief Summary

The aim of this study is to assess if there are significant differences in the failure rate of stainless steel and ceramic brackets. For this study, patients will be enrolled and divided into two groups, according to the type of brackets (stainless steel or ceramic) used for orthodontic treatment. Failure rates will be recorded every month for 12 months and survival analysis will be performed, together with skeletal and space analysis.

Detailed Description

This clinical trial aims to investigate if there are differences in the failure rates of stainless steel and ceramic orthodontic brackets. Patients willing to start orthodontic fixed therapy and recruited for the study will be asked to sign the informed consent. Parents will sign the consent for underage patients. After that, patients will be divided into two groups:

• Group MET: stainless steel brackets will be bonded on the vestibular surfaces of teeth.
• Group CER: ceramic brackets will be bonded on the vestibular surfaces of teeth. The following sequence of archwires will be adopted for the first six months: 0.012-in Niti, 0.014-in Niti, 0.016-in NiTi, 0.018 SS Australian, 0.020 SS Australian, 0.017X0.025-in NiTi, 0.019X0.025-in SS. The failure rates of the brackets will be recorded each month for 12 months. Each failed bracket will be recorded once. For each patient, pre-treatment lateral cephalometric radiograph and study models will be used to measure ANB angle, Wits, Skeletal Class, dento-alveolar discrepancy and Little Index at the beginning of the treatment. Bond failures will be recorded together with the archwire engaged at the moment of the failure.

Sample size Sample size was calculated with the following assumptions: ability to detect a clinically relevant difference of 4.935% in the failure rates (primary outcome) of the two groups with an alfa = 0.05 and power = 80%. The assumptions were based on findings of a previous study with an expected value of 12.08% for the first group at the end of 12 months of therapy. Therefore, 800 brackets (40 patients) per group were required for the study.

Statistical analysis Statistical analysis will be conducted with R software (R version 3.1.3, R Development Core Team, R Foundation for Statistical Computing, Wien, Austria). Fisher exact test will be performed to evaluate the differences between the failure rates of the two groups, between anterior and posterior sites and between upper and lower arches. Kaplan-Meier survival analysis of the bond failures will be performed among the 12 months of the study. Linear regressions will be calculated to assess the effects on bond failure of the skeletal and dental variables collected before the bonding procedure. Significance for all statistical tests will be predetermined at P<0.05.

Conditions

Dental Malocclusion

Study Design

• Allocation Method: NON_RANDOMIZED
• Intervention Model: PARALLEL
• Primary Study Purpose: DIAGNOSTIC
• Blinding Strategy: DOUBLE

Study Groups

Groups MET

Patients from this group will undergo orthodontic fixed treatment with stainless steel brackets.

Group Type: ACTIVE_COMPARATOR

Fixed orthodontic treatment with stainless steel brackets

Intervention Type: OTHER

Orthophosphoric acid 37% acid (Gerhò Etchant gel 37%, Gerhò spa, Terlano, Italy) will be applied for 30 s for the etching of the vestibular surfaces of teeth. The, after rinsing and drying, a thin layer of Transbond XT Light Cure Adhesive Primer (3M Unitek, Monrovia, CA, USA) will be applied and then cured for 10 s with a LED unit. At last, Transbond XT Light Cure Adhesive Paste (3M Unitek) will be applied on the base of stainless steel brackets (Queen Series Low Profile Brackets MBT 0.022", Aestetika, Terni, TR, Italy); brackets will be applied on the vestibular surfaces of teeth with a light pressure and the extra paste will be removed. Curing will be performed with the LED unit at 2 mm distant from the enamel-bracket interface for 40 s, 10 s per each surface (mesial, distal, gingival and occlusal). The following sequence of archwires will be adopted for the first six months: 0.012-in Niti, 0.014-in Niti, 0.016-in NiTi, 0.018 SS, 0.020 SS, 0.017X0.025-in NiTi, 0.019X0.025-in SS.

Group CER

Patients from this group will undergo orthodontic fixed treatment with ceramic brackets.

Group Type: ACTIVE_COMPARATOR

Fixed orthodontic treatment with ceramic brackets

Intervention Type: OTHER

Orthophosphoric acid 37% acid (Gerhò Etchant gel 37%, Gerhò spa, Terlano, Italy) will be applied for 30 s for the etching of the vestibular surfaces of teeth. The, after rinsing and drying, a thin layer of Transbond XT Light Cure Adhesive Primer (3M Unitek, Monrovia, CA, USA) will be applied and then cured for 10 s with a LED unit. At last, Transbond XT Light Cure Adhesive Paste (3M Unitek) will be applied on the base of ceramic brackets; brackets (Super Clear Series Brackets MBT 0.022", Aestetika, Terni, TR, Italy) will be applied on the vestibular surfaces of teeth with a light pressure and the extra paste is removed. Curing will be performed with the LED unit at 2 mm distant from the enamel-bracket interface for 40 s, 10 s per each surface (mesial, distal, gingival and occlusal). Then, the following sequence of archwires will be adopted for the first six months: 0.012-in Niti, 0.014-in Niti, 0.016-in NiTi, 0.018 SS, 0.020 SS, 0.017X0.025-in NiTi, 0.019X0.025-in SS

Interventions

Fixed orthodontic treatment with stainless steel brackets

Orthophosphoric acid 37% acid (Gerhò Etchant gel 37%, Gerhò spa, Terlano, Italy) will be applied for 30 s for the etching of the vestibular surfaces of teeth. The, after rinsing and drying, a thin layer of Transbond XT Light Cure Adhesive Primer (3M Unitek, Monrovia, CA, USA) will be applied and then cured for 10 s with a LED unit. At last, Transbond XT Light Cure Adhesive Paste (3M Unitek) will be applied on the base of stainless steel brackets (Queen Series Low Profile Brackets MBT 0.022", Aestetika, Terni, TR, Italy); brackets will be applied on the vestibular surfaces of teeth with a light pressure and the extra paste will be removed. Curing will be performed with the LED unit at 2 mm distant from the enamel-bracket interface for 40 s, 10 s per each surface (mesial, distal, gingival and occlusal). The following sequence of archwires will be adopted for the first six months: 0.012-in Niti, 0.014-in Niti, 0.016-in NiTi, 0.018 SS, 0.020 SS, 0.017X0.025-in NiTi, 0.019X0.025-in SS.

Intervention Type: OTHER

Fixed orthodontic treatment with ceramic brackets

Orthophosphoric acid 37% acid (Gerhò Etchant gel 37%, Gerhò spa, Terlano, Italy) will be applied for 30 s for the etching of the vestibular surfaces of teeth. The, after rinsing and drying, a thin layer of Transbond XT Light Cure Adhesive Primer (3M Unitek, Monrovia, CA, USA) will be applied and then cured for 10 s with a LED unit. At last, Transbond XT Light Cure Adhesive Paste (3M Unitek) will be applied on the base of ceramic brackets; brackets (Super Clear Series Brackets MBT 0.022", Aestetika, Terni, TR, Italy) will be applied on the vestibular surfaces of teeth with a light pressure and the extra paste is removed. Curing will be performed with the LED unit at 2 mm distant from the enamel-bracket interface for 40 s, 10 s per each surface (mesial, distal, gingival and occlusal). Then, the following sequence of archwires will be adopted for the first six months: 0.012-in Niti, 0.014-in Niti, 0.016-in NiTi, 0.018 SS, 0.020 SS, 0.017X0.025-in NiTi, 0.019X0.025-in SS

Intervention Type: OTHER

Eligibility Criteria

Inclusion Criteria

• patients willing to begin fixed multibracket therapy with metallic or ceramic brackets;
• full permanent dentition;
• enamel integrity, absence of traumatic or carious lesions, no pretreatment procedure performed with chemical agents;
• no previous orthodontic treatment with fixed vestibular appliances.

Exclusion Criteria

• patients suffering from systemic diseases;
• patients taking medications that could alter periodontal conditions (NSAIDS, steroids, etc.);
• patients with low compliance;
• patients unable to give informed consent;
• presence of congenital enamel defects;
• extractions for orthodontic reasons;
• oral/orthognathic surgery.

• Eligible Sex: ALL
• Accepts Healthy Volunteers: No

Sponsors

University of Pavia

OTHER

Sponsor Role: lead

Responsible Party

Andrea Scribante

Research Resident, Principal Investigator

Responsibility Role: PRINCIPAL_INVESTIGATOR

Principal Investigators

Andrea Scribante, DDS, PhD

Role: PRINCIPAL_INVESTIGATOR

University of Pavia

Locations

Unit of Orthodontics and Pediatric Dentistry - Section of Dentistry - Department of Clinical, Surgical, Diagnostic and Pediatrics - University of Pavia

Pavia, Lombardy, Italy

Countries

Italy

References

Kirschneck C, Rohn C, Proff P, Reicheneder C. Influence of enamel sealing with a light-cured filled sealant before bracket bonding on the bond failure rate during fixed orthodontic therapy. J Orofac Orthop. 2019 May;80(3):136-143. doi: 10.1007/s00056-019-00174-w. Epub 2019 Apr 10.

Reference Type: BACKGROUND

PMID: 30972424 (View on PubMed)

Other Identifiers

2021-METCERORTO

Identifier Type: -

Identifier Source: org_study_id