Study Results
The study team has not published outcome measurements, participant flow, or safety data for this trial yet. Check back later for updates.
Basic Information
Get a concise snapshot of the trial, including recruitment status, study phase, enrollment targets, and key timeline milestones.
COMPLETED
NA
20 participants
INTERVENTIONAL
2015-01-01
2018-12-30
Brief Summary
Review the sponsor-provided synopsis that highlights what the study is about and why it is being conducted.
Patients with severe neuromuscular disorders (NMDs) are likely to develop progressive respiratory insufficiency, leading to noninvasive ventilation during the night and, later, during night and day. Ventilation via a mouthpiece (MPV) is an elegant option to offer daytime ventilation. The patient preference regarding the ideal material for daytime MPV is unclear.
OBJECTIVES:
The purpose of this study was to determine which ventilator, tubing support and mouthpiece was most effective and preferred by patients with NMDs.
METHODS:
Two separate MPV equipment sets were compared in 20 patients with NMDs in a randomized cross-over study. The first set consisted in a non-dedicated ventilator for MPV (PB560, Covidien) combined with a customized tubing support on the shoulders and a plastic angled mouthpiece. The second set included an MPV-dedicated ventilator (Trilogy 100, Philips Respironics) without back-up rate and kiss trigger combined with a commercially available tubing support and a silicone straw mouthpiece. The Borg dyspnea score, the free time without noninvasive ventilation, the transcutaneous oxygen saturation (SpO2) and carbon dioxide tension (TcCO2) were recorded without and with MPV. A 17-items list assessing the patient perception about MPV sets was completed.
Related Clinical Trials
Explore similar clinical trials based on study characteristics and research focus.
Non-invasive Ventilation and Physical Activity
NCT02951572
NMES to Prevent Respiratory Muscle Atrophy in Mechanically Ventilated Patients
NCT03453944
Effects of Vibrating Mesh Nebulisation in Patients With COPD During Non-invasive Ventilation (VMN-NIV)
NCT06884228
Assessment of Volume-targeted Ventilation in Patients With Neuromuscular Disease
NCT06339580
Efficacy of Intermittent Abdominal Pressure Ventilation in Neuromuscular Patients
NCT05346263
Detailed Description
Dive into the extended narrative that explains the scientific background, objectives, and procedures in greater depth.
Aims
The primary aim of the study was to compare blood gas measurements, dyspnea score and general perception between the two sets for MPV. The second aim of the study was to determine the preference of patients on MPV equipment according to their free time. We also aimed at collecting individual comments of patients regarding their experience with the two ventilators, arm supports and mouthpieces.
Patients
All individuals affected by NMDs attending our Centre for Home Mechanical Ventilation between 2015 and 2018 who required daytime MPV as an extension of nocturnal NIV were considered for study inclusion. Our criterion for implementing daytime ventilation was the combined presence of increasing dyspnea and increasing workload on inspiratory muscles during the daytime (C) or, ultimately, daytime hypercapnia in the evening when patients lay in bed before starting nocturnal NIV and sleeping (M). All patients used Volume-Assisted Pressure Control mode (VAPC) at night via a Covidien Puritan Bennett PB560 ventilator (Covidien, Mansfield, USA).
Exclusion criteria comprised patients with ineffective NIV during sleep as assessed by the measurement of TcCO2\>49mmHg (S), patients with uncontrollable oral leaks with MPV or episode of acute respiratory infection during the trials. The current study was approved by the local ethics committee and registered (N° registered study. Clinical trial.org follows). The patients gave their written informed consent before study inclusion.
Study design
The study design consisted in a randomized cross-over study. Patients served as their own control. Measurements were made during a 48-hour hospitalization that is scheduled every 6 months in patients attending our Centre for Home Mechanical Ventilation. Hospitalization systematically included nocturnal recordings of transcutaneous carbon dioxide tension (TcCO2) and pulse oximetry (SpO2). Randomized trials were decided by toss and tested during a 1-hour session of assisted breathing via MPV on two separate days. Patients were seated in their wheelchair and trials started with connecting patients to transcutaneous TcCO2 and SpO2 measurements.
Equipment for MPV
Two different MPV equipment sets were compared (figure 1). Each set included separate ventilators, tubing supports and mouthpieces. Both ventilators used volume assisted control mode (VAC) according to the patient preference reported in a previous study (Q).
The first set consisted in a non-dedicated (NON-DED) ventilator for MPV (PB560) using a single active tubing with an exhalation valve. The trigger was set on high sensitivity. Solutions to avoid nuisance from disconnection alarms were used according to a report from Boitano and colleagues (O). The PB560 was combined with a local custom-made tubing support in thermo-formable plastic U-piece placed on the patient shoulders (figure 1 A) described in a previous report (M). The mouthpiece consisted in a 22mm white angled hard plastic mouthpiece (Philips Respironics; Murrysville, USA). Despite being a non MPV-dedicated set, the NON-DED set was previously reported as safe and an effective (M).
The second set included an MPV-dedicated (DED) ventilator (Trilogy 100, Philips Respironics; Murrysville, USA) with an MPV dedicated software with disconnection alarms switched off. This set included a single passive tubing without exhalation valve. A back-up rate set at zero cycle per minute was associated with a kiss trigger. The kiss trigger consisted in a sensitive flow detection system allowing on-demand ventilation via a constant airflow produced by the ventilator. When this constant flow was disrupted by the engagement and disengagement of the patient's lips from the mouthpiece, a single inspiratory cycle was triggered. Finally, the DED equipment included a smart flexible tube support system attached via a wedge on the patient's wheelchair (figure 1 B). The tubing ended with a silicone made mouthpiece designed as a straw. The backup rate in de DED equipment was copied from nighttime values. Similar VAC mode, tidal volumes and inspiratory times were used in both equipment's to facilitate further comparison. Trials were a succession of intermittent disconnections-reconnections to the mouthpiece. All patients were encouraged to manage leaks around the mouthpiece according to their breathing comfort.
Measurements
Day 1
Forced vital capacity (FVC), maximal inspiratory (MIP) and expiratory pressures (MEP) were measured on the first day in seated position as per ATS/ERS guidelines (T) via a heated Fleisch no. 2 pneumotachometer (Metabo, Lausanne, Switzerland). The Borg dyspnea scale on 10 points reflecting the degree of comfortable breathing was also recorded on the first day (C). Other daytime baseline measurements such as transcutaneous oxygen saturation (SpO2) and carbon dioxide tension (TcCO2) were recorded without daytime ventilation via an ear clip connected to a Sentec monitoring (SenTec AG, Therwil, Swizerland). This technique was validated for continuous monitoring of PaCO2 during sleep in this group of patients (U). The participants were asked to determine their free time defined as the time of comfortable spontaneous breathing without NIV. Finally, the maximal active mouth opening (space between upper and lower teeth) was measured.
Day 2 and 3
The maximal TcCO2 and minimal SpO2 values obtained during the trials were measured. As in day 1, the Borg dyspnea score was recorded to evaluate the breathing comfort during MPV trials. A 17-items list assessing the patient perception with a Likert scale ranging from 0 to 5 (0: maximal dissatisfaction, 5: maximal satisfaction) was completed during the trials.
Conditions
See the medical conditions and disease areas that this research is targeting or investigating.
Study Design
Understand how the trial is structured, including allocation methods, masking strategies, primary purpose, and other design elements.
RANDOMIZED
CROSSOVER
TREATMENT
Study Groups
Review each arm or cohort in the study, along with the interventions and objectives associated with them.
Ventilator PB560 (Covidien)
The non-dedicated (NON-DED) set comprised a ventilator for MPV (PB560) using a single active tubing with an exhalation valve. A custom-made arm support and plastic mouthpiece were used.
Ventilator
Comparison of two ventilators for mouthpiece ventilation
Ventilator Trilogy (Philips Respironics)
The dedicated (DED) set comprised a ventilator for MPV (Trilogy 100, Philips Respironics; with dedicated software, with a single passive tubing without exhalation valve. A back-up rate set at zero cycle per minute was associated with a kiss trigger, with a smart flexible tube support system and with a silicone made mouthpiece designed as a straw.
Ventilator
Comparison of two ventilators for mouthpiece ventilation
Interventions
Learn about the drugs, procedures, or behavioral strategies being tested and how they are applied within this trial.
Ventilator
Comparison of two ventilators for mouthpiece ventilation
Eligibility Criteria
Check the participation requirements, including inclusion and exclusion rules, age limits, and whether healthy volunteers are accepted.
Inclusion Criteria
Exclusion Criteria
* patients with ineffective NIV during sleep as assessed by the measurement of TcCO2\>49mmHg (S)
* patients with uncontrollable oral leaks with MPV or episode of acute respiratory infection during the trials
ALL
Yes
Sponsors
Meet the organizations funding or collaborating on the study and learn about their roles.
Revalidatieziekenhuis InkendaaI
NETWORK
Responsible Party
Identify the individual or organization who holds primary responsibility for the study information submitted to regulators.
Kristien Mostinckx
Head of Rehabilitation Department
Locations
Explore where the study is taking place and check the recruitment status at each participating site.
Michel Toussaint
Vlezenbeek, , Belgium
Countries
Review the countries where the study has at least one active or historical site.
Other Identifiers
Review additional registry numbers or institutional identifiers associated with this trial.
2014-WMT-001
Identifier Type: -
Identifier Source: org_study_id
More Related Trials
Additional clinical trials that may be relevant based on similarity analysis.