Pivot-Flex Foot: Optimal Coupling Ratio Between Transverse and Sagittal-plane Motions Using a Torsionally Adaptive Prosthesis for Individuals With Lower Limb Amputation

Study Results

Results available

Outcome measurements, participant flow, baseline characteristics, and adverse events have been published for this study.

View full results

Basic Information

Get a concise snapshot of the trial, including recruitment status, study phase, enrollment targets, and key timeline milestones.

Recruitment Status

COMPLETED

Clinical Phase

NA

Total Enrollment

14 participants

Study Classification

INTERVENTIONAL

Study Start Date

2018-04-18

Study Completion Date

2024-11-18

Brief Summary

Review the sponsor-provided synopsis that highlights what the study is about and why it is being conducted.

When prescribing a prosthetic foot, clinicians face a dizzying array of choices as more than 200 different prosthetic feet are available. While these conventional prosthetic feet primarily function in the sagittal plane, the intact foot and ankle comprise a complex set of joints that allow rotation in multiple planes of motion. Some of these motions are coupled, meaning rotation in one plane induces motion in another. One such coupling is between the sagittal and transverse planes. For every step, plantar- and dorsi-flexion motion in the sagittal plane is coupled with external and internal rotation of the shank relative to the foot in the transverse plane. There is no prosthetic foot available for prescription that mimics this natural coupling.

To investigate the need for this coupling, the investigators have built a torsionally adaptive prosthesis where the coupling ratio between the transverse- and sagittal-planes can be independently controlled with a motor.

This research has one specific aim: to identify the optimal coupling ratio between transverse- and sagittal-plane motions using a novel, torsionally adaptive prosthesis for individuals with lower limb amputation. The investigators will conduct a human subject experiment wearing the motor-driven and computer controlled torsionally adaptive prosthesis. Individuals with lower limb amputation will be asked to walk in a straight line and in both directions around a circle while the coupling ratio between transverse- and sagittal-plane motions is varied between trials. Participants will be blinded to the coupling ratio.

The investigators hypothesize that: (1) a coupling ratio exists that minimizes undesirable transverse-plane socket torque and (2) there will be a coupling ratio that individuals with lower limb amputation prefer.

Related Clinical Trials

Explore similar clinical trials based on study characteristics and research focus.

Automatic Prosthetic Foot Stiffness Modulation to Improve Balance

NCT06711588

Lower Limb Amputation Below Knee

RECRUITING NA

Lower Limb Prostheses for Individuals Who Carry Infants, Toddlers, and Other Loads

NCT07159490

Amputation Prosthesis User

COMPLETED NA

Effectiveness of Frontal Plane Adaptability in a Novel Foot Prosthesis

NCT06214026

Amputation

RECRUITING NA

Comparative Study Evaluating the Mobility of Transtibial Amputee Patients Using the PRO-FLEX PIVOT® Foot Versus a Class III Energy Storing and Returning (ESAR) Prosthetic Foot.

NCT06627361

Amputation

RECRUITING NA

Influence of Prosthetic Foot Stiffness on Transtibial Osseointegrated Bone-Anchored Limb Outcomes

NCT07263945

Amputation Transtibial Amputation - Unilateral Bone Anchored Devices +1 more

RECRUITING PHASE1

Detailed Description

Dive into the extended narrative that explains the scientific background, objectives, and procedures in greater depth.

The human ankle is a complex mechanism that does not behave like a simple hinge. Instead, rotations in all three axes are allowed and some are coupled together. In particular, the axis of rotation of the talo-crural joint during ankle flexion is inclined downwards and laterally relative to horizontal, and the rotation ranges from 10 to 26 degrees among individuals. This rotation couples plantar- and dorsi-flexion motion with external and internal rotation of the shank relative to the foot, respectively. This feature of the natural limb has not been replicated in prosthetic feet and ankles.

Lower limb amputees take thousands of steps on their prosthesis each day and none feature coupled motion between the transverse- and sagittal-planes. The absence of this natural coupling may be related to the high incidence of residual limb soft tissue injuries, the need for compensatory gait, and overall dissatisfaction with their prostheses.

Transverse rotation adapters, consisting of simple torsional springs, are available for prescription. These devices can increase transverse-plane rotations and decrease transverse-plane torques, but their use is not widespread and if excessively compliant, may reduce gait stability. Cost, weight, prosthesis build height, and the inability for the user to adjust the stiffness may all play a role in their lack of adoption, but it may also be that the transverse-plane rotation is not coupled with the sagittal-plane. With these devices, motion only occurs in the transverse-plane when a transverse-plane torque is applied.

This research has one specific aim: to identify the optimal coupling ratio between transverse- and sagittal-plane motions using a novel, torsionally adaptive prosthesis for individuals with lower limb amputation. The investigators will fit a sample population of unilateral transtibial amputees with the motor-driven and computer controlled torsionally adaptive prosthesis.

Participants perform three activities: walking in a straight line (study visit 1) and in both directions around a circle (study visit 2). During each of these three activities, the torsionally adaptive prosthesis will be set to five different coupling ratios in random order. Participants will be blinded to the coupling ratio.

The general hypotheses for this study are: (H1) a coupling ratio exists between 0 (no coupling) to 1:2 (one degree of transverse-plane motion for every two degrees of sagittal-plane motion) that minimizes transverse-plane socket torque and (H2) an amputee preferred coupling ratio will exist within this range.

This research will discover how best to couple transverse- and sagittal-plane motion in the prostheses of lower limb amputees.

Conditions

See the medical conditions and disease areas that this research is targeting or investigating.

Lower Extremity Amputation

Study Design

Understand how the trial is structured, including allocation methods, masking strategies, primary purpose, and other design elements.

Allocation Method

RANDOMIZED

Intervention Model

FACTORIAL

This within-subject, cross-over, factorial design study (3 arms x 5 intervention settings) aims to identify the optimal coupling ratio between transverse- and sagittal-plane motions using a torsionally adaptive prosthesis. The 3 arms including walking in a straight line (study visit 1) and walking in a circle with their lower limb prosthesis on the inside and outside of the circle (study visit 2). The order in which the participants walk around a circle with their prosthesis on the inside or the outside will be randomized. The study intervention, a torsionally adaptive prosthesis, can be set to 5 different settings (i.e., coupling ratios) including 0:0, 1:6, 1:4, 1:3, and 1:2 (transverse:sagittal). Within each arm, each participant will walk with the torsionally adaptive prosthesis set to the 5 different settings in random order. Participants will not be blinded to the arm but will be blinded to the intervention setting (coupling ratio).

Primary Study Purpose

TREATMENT

Blinding Strategy

NONE

Study Groups

Review each arm or cohort in the study, along with the interventions and objectives associated with them.

Straight line walking

All participants will walk in a straight line while wearing the study prosthesis.

Group Type EXPERIMENTAL

Torsionally adaptive prosthesis with 0:1 coupling ratio

Intervention Type DEVICE

The torsionally adaptive prosthesis can be programmed to couple the motion between the transverse- and sagittal-planes. A coupling ratio (transverse:sagittal) of 0:1 means there will be no coupling between the transverse- and sagittal-plane motion. That is, regardless of any motion in the sagittal plane, there will be zero motion in the transverse plane.

Torsionally adaptive prosthesis with 1:6 coupling ratio

Intervention Type DEVICE

The torsionally adaptive prosthesis can be programmed to couple the motion between the transverse- and sagittal-planes. A coupling ratio (transverse:sagittal) of 1:6 means there will be one degree of motion in the transverse plane for every six degrees of motion in the sagittal plane.

Torsionally adaptive prosthesis with 1:4 coupling ratio

Intervention Type DEVICE

The torsionally adaptive prosthesis can be programmed to couple the motion between the transverse- and sagittal-planes. A coupling ratio (transverse:sagittal) of 1:4 means there will be one degree of motion in the transverse plane for every four degrees of motion in the sagittal plane.

Torsionally adaptive prosthesis with 1:3 coupling ratio

Intervention Type DEVICE

The torsionally adaptive prosthesis can be programmed to couple the motion between the transverse- and sagittal-planes. A coupling ratio (transverse:sagittal) of 1:3 means there will be one degree of motion in the transverse plane for every three degrees of motion in the sagittal plane.

Torsionally adaptive prosthesis with 1:2 coupling ratio

Intervention Type DEVICE

The torsionally adaptive prosthesis can be programmed to couple the motion between the transverse- and sagittal-planes. A coupling ratio (transverse:sagittal) of 1:2 means there will be one degree of motion in the transverse plane for every two degrees of motion in the sagittal plane.

Circle walking with prosthesis inside

All participants will walk around a 1-meter radius circle with their prosthesis on the inside of the circle.

Group Type EXPERIMENTAL

Torsionally adaptive prosthesis with 0:1 coupling ratio

Intervention Type DEVICE

The torsionally adaptive prosthesis can be programmed to couple the motion between the transverse- and sagittal-planes. A coupling ratio (transverse:sagittal) of 0:1 means there will be no coupling between the transverse- and sagittal-plane motion. That is, regardless of any motion in the sagittal plane, there will be zero motion in the transverse plane.

Torsionally adaptive prosthesis with 1:6 coupling ratio

Intervention Type DEVICE

The torsionally adaptive prosthesis can be programmed to couple the motion between the transverse- and sagittal-planes. A coupling ratio (transverse:sagittal) of 1:6 means there will be one degree of motion in the transverse plane for every six degrees of motion in the sagittal plane.

Torsionally adaptive prosthesis with 1:4 coupling ratio

Intervention Type DEVICE

The torsionally adaptive prosthesis can be programmed to couple the motion between the transverse- and sagittal-planes. A coupling ratio (transverse:sagittal) of 1:4 means there will be one degree of motion in the transverse plane for every four degrees of motion in the sagittal plane.

Torsionally adaptive prosthesis with 1:3 coupling ratio

Intervention Type DEVICE

The torsionally adaptive prosthesis can be programmed to couple the motion between the transverse- and sagittal-planes. A coupling ratio (transverse:sagittal) of 1:3 means there will be one degree of motion in the transverse plane for every three degrees of motion in the sagittal plane.

Torsionally adaptive prosthesis with 1:2 coupling ratio

Intervention Type DEVICE

The torsionally adaptive prosthesis can be programmed to couple the motion between the transverse- and sagittal-planes. A coupling ratio (transverse:sagittal) of 1:2 means there will be one degree of motion in the transverse plane for every two degrees of motion in the sagittal plane.

Circle walking with prosthesis outside

All participants will walk around a 1-meter radius circle with their prosthesis on the outside of the circle.

Group Type EXPERIMENTAL

Torsionally adaptive prosthesis with 0:1 coupling ratio

Intervention Type DEVICE

The torsionally adaptive prosthesis can be programmed to couple the motion between the transverse- and sagittal-planes. A coupling ratio (transverse:sagittal) of 0:1 means there will be no coupling between the transverse- and sagittal-plane motion. That is, regardless of any motion in the sagittal plane, there will be zero motion in the transverse plane.

Torsionally adaptive prosthesis with 1:6 coupling ratio

Intervention Type DEVICE

The torsionally adaptive prosthesis can be programmed to couple the motion between the transverse- and sagittal-planes. A coupling ratio (transverse:sagittal) of 1:6 means there will be one degree of motion in the transverse plane for every six degrees of motion in the sagittal plane.

Torsionally adaptive prosthesis with 1:4 coupling ratio

Intervention Type DEVICE

The torsionally adaptive prosthesis can be programmed to couple the motion between the transverse- and sagittal-planes. A coupling ratio (transverse:sagittal) of 1:4 means there will be one degree of motion in the transverse plane for every four degrees of motion in the sagittal plane.

Torsionally adaptive prosthesis with 1:3 coupling ratio

Intervention Type DEVICE

The torsionally adaptive prosthesis can be programmed to couple the motion between the transverse- and sagittal-planes. A coupling ratio (transverse:sagittal) of 1:3 means there will be one degree of motion in the transverse plane for every three degrees of motion in the sagittal plane.

Torsionally adaptive prosthesis with 1:2 coupling ratio

Intervention Type DEVICE

The torsionally adaptive prosthesis can be programmed to couple the motion between the transverse- and sagittal-planes. A coupling ratio (transverse:sagittal) of 1:2 means there will be one degree of motion in the transverse plane for every two degrees of motion in the sagittal plane.

Interventions

Learn about the drugs, procedures, or behavioral strategies being tested and how they are applied within this trial.

Torsionally adaptive prosthesis with 0:1 coupling ratio

The torsionally adaptive prosthesis can be programmed to couple the motion between the transverse- and sagittal-planes. A coupling ratio (transverse:sagittal) of 0:1 means there will be no coupling between the transverse- and sagittal-plane motion. That is, regardless of any motion in the sagittal plane, there will be zero motion in the transverse plane.

Intervention Type DEVICE

Torsionally adaptive prosthesis with 1:6 coupling ratio

The torsionally adaptive prosthesis can be programmed to couple the motion between the transverse- and sagittal-planes. A coupling ratio (transverse:sagittal) of 1:6 means there will be one degree of motion in the transverse plane for every six degrees of motion in the sagittal plane.

Intervention Type DEVICE

Torsionally adaptive prosthesis with 1:4 coupling ratio

The torsionally adaptive prosthesis can be programmed to couple the motion between the transverse- and sagittal-planes. A coupling ratio (transverse:sagittal) of 1:4 means there will be one degree of motion in the transverse plane for every four degrees of motion in the sagittal plane.

Intervention Type DEVICE

Torsionally adaptive prosthesis with 1:3 coupling ratio

The torsionally adaptive prosthesis can be programmed to couple the motion between the transverse- and sagittal-planes. A coupling ratio (transverse:sagittal) of 1:3 means there will be one degree of motion in the transverse plane for every three degrees of motion in the sagittal plane.

Intervention Type DEVICE

Torsionally adaptive prosthesis with 1:2 coupling ratio

The torsionally adaptive prosthesis can be programmed to couple the motion between the transverse- and sagittal-planes. A coupling ratio (transverse:sagittal) of 1:2 means there will be one degree of motion in the transverse plane for every two degrees of motion in the sagittal plane.

Intervention Type DEVICE

Eligibility Criteria

Check the participation requirements, including inclusion and exclusion rules, age limits, and whether healthy volunteers are accepted.

Inclusion Criteria

* Unilateral transtibial amputation
* Been fit with a prosthesis and used it for at least six months
* Wear the prosthesis for four or more hours on an average day
* Prescribed prosthesis can accommodate fitment of the study prosthetic components to be tested (determined at initial visit)

Exclusion Criteria

* Improper fit and suspension with current prosthesis and one cannot be achieved with clinical resources (determined at initial visit)
* Current skin irritation or injury on residual limb
* Osteoarthritis, injury, or pain that interferes with walking ability
* Currently incarcerated
* Pregnant (determined via self-report)
* Inadequate cognitive function or language proficiency to consent to participate

Minimum Eligible Age

18 Years

Maximum Eligible Age

70 Years

Eligible Sex

ALL

Accepts Healthy Volunteers

No