Pulmonary Artery Energy Sealing for VATS Procedure

NCT ID: NCT01871597

Last Updated: 2013-09-24

Study Results

Results pending

The study team has not published outcome measurements, participant flow, or safety data for this trial yet. Check back later for updates.

Basic Information

Get a concise snapshot of the trial, including recruitment status, study phase, enrollment targets, and key timeline milestones.

Recruitment Status

COMPLETED

Clinical Phase

NA

Total Enrollment

15 participants

Study Classification

INTERVENTIONAL

Study Start Date

2012-12-31

Study Completion Date

2013-07-31

Brief Summary

Review the sponsor-provided synopsis that highlights what the study is about and why it is being conducted.

Video assisted thoracoscopic surgery (VATS) anatomical lung resections (lobectomy or pneumonectomy) provide an effective minimally invasive treatment for stage 1 lung cancer.

Currently, a minority of anatomical pulmonary resections are being performed by VATS (15%) (6). The technical difficulty and danger of VATS lobectomy is related to pulmonary arterial branch manipulation and this is the main limitation of many thoracic surgeons regarding the adoption of VATS lobectomy. We believe that if we can decrease the manipulation required by the surgeon on the pulmonary arterial branch, we can make these procedures safe and therefore more prevalent for anatomical pulmonary resections.

Detailed Description

Dive into the extended narrative that explains the scientific background, objectives, and procedures in greater depth.

We believe that most of the stress (patient and surgeon) during VATS anatomical lung resection originates from manipulation of the pulmonary arteries. Endostaplers utilized during VATS to seal the pulmonary arteries require a lot of space and manipulation of these fragile vessels. Furthermore, the arteries must be completely dissected from the surrounding tissues. This increases manipulations of pulmonary arteries during the procedure. Energy sealing devices require much less space and dissection due to their size and sealing of the arteries can be performed without complete dissection from the surrounding tissues. Thus, the utilization of energy sealing devices will decrease excessive manipulations on the pulmonary arterial branches during VATS anatomical lung resections which can render these procedures easier and safer. This will not only decrease the stress on the patient, but also on the surgeon and will hopefully allow more surgeons to adopt these minimally invasive techniques which have been proven to be superior (length of stay, cost of care, pain, morbidity post-op, atrial fibrillation, quality of life, systemic inflammation, ability to receive adjuvant chemotherapy) to open thoracotomy.

The intraoperative techniques will not differ and blood vessel ligation will be performed according to standard operative procedures either using staplers or direct ligation of the pulmonary vessels.

After resection and delivery of the resected specimen out of the patient, the specimen will be examined in vitro out of the operative field in a non-sterile field in the operative room. The lobar pulmonary artery and its main segmental branches will be dissected. Canulation of a major segmental branch will be performed using an arterial pressure monitoring catheter. The canulation will be secured with ligation of 2-0 silk suture. A three way valve will be attached directly to the arterial catheter. One branch of the three way valve will be attached to a controlled pressure syringe pump and the other branch will be attached to a digital manometer. All other segmental branches of the pulmonary artery will be ligated to maintain the pressure throughout the catheterized segmental branch. Normal 25 mmHg pressure will be obtained by inflating with normal saline. The lobar pulmonary artery and the main segmental branches' diameters will be measured using a digital caliper from the adventitia to the adventitia in the inflated portion with normal saline of pressure 25 mmHg. The lobar pulmonary artery and the main segmental arteries will be sealed using one of the main energy seals (Ligasure, Harmonic scalpel, Enseal, Thunderbeat, unipolar or conventional bipolar cautery or application of metal or Hem-o-lok clips). The sealing will be performed with a normal 25 mmHg intra-arterial pressure.

In bipolar sealing, the arterial wall will be compressed between the energy device jaws until complete sealing is achieved. The artery will then be divided utilizing fine scissors. In pulmonary arterial branches sealed with Harmonic scalpel, Thunderbeat and Enseal, the arterial wall sealed will be divided in the same sealing step. In the Unipolar cautery arterial sealing, a DeBakey forceps will be utilized to compress the arterial walls together and then sealing will be performed with direct application of the unipolar cautery to the forceps. Complete sealing achieved by complete carbonization of the arterial walls. The artery will be divided with scissors after sealing.

After division of the pulmonary artery, normal saline solution will be injected through the controlled pressure syringe pump to achieve an intraluminal pressure until the bursting pressure is reached. Intraluminal pressure will be recorded and the bursting pressure will be registered.

The resected specimens will be divided into 8 groups according to the type of sealing performed; (Ligasure, Harmonic scalpel, Enseal, Thunderbeat, Unipolar and conventional bipolar cautery, Metal clip, and Hem-o-lok clip)

Conditions

See the medical conditions and disease areas that this research is targeting or investigating.

Lung Cancer

Keywords

Explore important study keywords that can help with search, categorization, and topic discovery.

Lung cancer VATS procedure Pulmonary Artery Sealing

Study Design

Understand how the trial is structured, including allocation methods, masking strategies, primary purpose, and other design elements.

Allocation Method

NA

Intervention Model

SINGLE_GROUP

Primary Study Purpose

TREATMENT

Blinding Strategy

NONE

Study Groups

Review each arm or cohort in the study, along with the interventions and objectives associated with them.

Intervention Group

Intervention - Pulmonary Artery Energy Seal

Group Type EXPERIMENTAL

Pulmonary Artery Energy Seal

Intervention Type DEVICE

Pulmonary artery energy seal devices such as: Ligasure, Harmonic scalpel, Enseal, Thunderbeat, Unipolar and Conventional bipolar Cautery, metal clip or Hem-o-lok clip will be used to seal the artery(ies)

Interventions

Learn about the drugs, procedures, or behavioral strategies being tested and how they are applied within this trial.

Pulmonary Artery Energy Seal

Pulmonary artery energy seal devices such as: Ligasure, Harmonic scalpel, Enseal, Thunderbeat, Unipolar and Conventional bipolar Cautery, metal clip or Hem-o-lok clip will be used to seal the artery(ies)

Intervention Type DEVICE

Eligibility Criteria

Check the participation requirements, including inclusion and exclusion rules, age limits, and whether healthy volunteers are accepted.

Inclusion Criteria

* All patients booked for open or VATS lobectomy, open or VATS pneumonectomy, lung transplantation.

Exclusion Criteria

* Inability to consent for the study.
* Patients less than 18 years old.
* Hilar lung tumours with proximity to major pulmonary arteries that might affect the integrity of the vascular margin.
Minimum Eligible Age

18 Years

Eligible Sex

ALL

Accepts Healthy Volunteers

No

Sponsors

Meet the organizations funding or collaborating on the study and learn about their roles.

Centre de Recherche du Centre Hospitalier de l'Université de Montréal

OTHER

Sponsor Role collaborator

Centre hospitalier de l'Université de Montréal (CHUM)

OTHER

Sponsor Role lead

Responsible Party

Identify the individual or organization who holds primary responsibility for the study information submitted to regulators.

Responsibility Role SPONSOR

Principal Investigators

Learn about the lead researchers overseeing the trial and their institutional affiliations.

Moishe Liberman, MD, PhD

Role: PRINCIPAL_INVESTIGATOR

Centre hospitalier de l'Université de Montréal (CHUM)

Locations

Explore where the study is taking place and check the recruitment status at each participating site.

Centre Hospitalier de l'Université de Montréal

Montreal, Quebec, Canada

Site Status

Countries

Review the countries where the study has at least one active or historical site.

Canada

References

Explore related publications, articles, or registry entries linked to this study.

Liberman M, Khereba M, Goudie E, Kazakov J, Thiffault V, Lafontaine E, Ferraro P. Pilot study of pulmonary arterial branch sealing using energy devices in an ex vivo model. J Thorac Cardiovasc Surg. 2014 Dec;148(6):3219-23. doi: 10.1016/j.jtcvs.2014.05.089. Epub 2014 Jul 19.

Reference Type DERIVED
PMID: 25125207 (View on PubMed)

Other Identifiers

Review additional registry numbers or institutional identifiers associated with this trial.

CT0041

Identifier Type: -

Identifier Source: org_study_id