Modified Periosteal Inhibition with Simultaneous Implant Placement in Aesthetic Zone
NCT ID: NCT06519773
Last Updated: 2025-03-26
Study Results
The study team has not published outcome measurements, participant flow, or safety data for this trial yet. Check back later for updates.
Basic Information
Get a concise snapshot of the trial, including recruitment status, study phase, enrollment targets, and key timeline milestones.
RECRUITING
PHASE1/PHASE2
20 participants
INTERVENTIONAL
2024-07-01
2025-10-01
Brief Summary
Review the sponsor-provided synopsis that highlights what the study is about and why it is being conducted.
* Once the tooth is extracted, the socket is gently debrided and irrigated using sterile saline solution. Then the dental implant is placed in the best prosthetic driven position, following the guidelines for immediate implants using prefabricated computer guided surgical template.
* After accurate implant placement, a full-thickness flap will be elevated at mesial and distal papilla making a buccal envelope. A bone lamina 0.5 mm thickness will be trimmed and hydrated in sterile saline solution for 30 s to soften it; it should be 1-2 mm larger and deeper than the vestibular bone.
Related Clinical Trials
Explore similar clinical trials based on study characteristics and research focus.
Edentulous Maxilla Opposed by 2-implant Mandibular Overdenture?
NCT06050213
Crestal Bone Loss in Mandibular Telescopic Overdentures. Overdenture with Milled Titanium, Milled Poly-ether Ketone Ketones and 3D Printed Chrome Cobalt Secondary Copings.
NCT06639893
Effect of Concentrated Growth Factors on Short Implant-Supported Overdentures
NCT06880965
Evaluation Of Marginal Bone Height Changes And Biting Force In Screw Retained Implant Prostheses Using Reinforced Resin Vs Monolithic Zirconium
NCT07007572
Evaluation of Peri-Implant Tissues of Different Implant Assisted Overdentures
NCT06647199
Detailed Description
Dive into the extended narrative that explains the scientific background, objectives, and procedures in greater depth.
1. Phase I therapy
* Full mouth supra and subgingival scaling and root planing will be performed to all enrolled patients. Patients will be instructed to rinse twice daily with 0.12% chlorohexidine mouth wash for 2 weeks.
* Before tooth extraction, initial radiographic records by cone beam computed tomography (CBCT) scans of the maxillary arch will be made. The pre-extraction measurements will be taken from CBCT scans to evaluate the presence of a fully intact labial plate of bone ≤1 mm. The labial plate thickness of the tooth to be extracted will be measured on cross sectional cuts at three levels below the labial bone crest: 0, 2, and 5 mm.
2. Surgical technique:
* After local anathesia, a traumatic extraction of the hopeless tooth will be made trying as much as possible to preserve the labial plate of bone and overlying soft tissue.
* Once the tooth is extracted, the socket is gently debrided and irrigated using sterile saline solution. Then the dental implant provided by Bego Dental Implant is placed in the best prosthetic driven position, following the guidelines for immediate implants using prefabricated computer guided surgical template.
* After accurate implant placement, a full-thickness flap will be elevated at mesial and distal papilla making a buccal envelope. A soft bone lamina provided by osteobiol 0.5 mm thickness will be trimmed and hydrated in sterile saline solution for 30 s to soften it; it should be 1-2 mm larger and deeper than the vestibular bone. The cortical lamina will be fixed using Glubran 2 provided by GEM which is N-butyl 2 cyanoacrylate + Metacryloxysulfolane adhesive.
The labial gap will be filled either with bone graft ( Regeinoss cortico cancelleous granules with collagen- xenograft. GRANNTIE )or collagen sponge.
The socket orifice will be sealed using a customized healing abutment screwed to the implant, adequately finished, and polished to ensure a proper soft tissue emergence profile. The papilla will be sutured back using 5.0 polypropylene sling suture. For all cases, the sutures will be removed after 2 weeks.
3. Postoperative Phase -All subjects will receive postoperative instructions including:
* Rinsing with 0.1% Chlorhexidine mouth rinse twice daily for two weeks.
* Antibiotics combination of 500 mg Metronidazole along with Amoxicillin Clavulanate (Augmentin 1g) every 12 hours one day preoperatively and continuing for 5 days after extraction.
* Non-steroidal anti-inflammatory (NSAID) medication of Ibuprofen 400 mg twice daily for one week.
Conditions
See the medical conditions and disease areas that this research is targeting or investigating.
Study Design
Understand how the trial is structured, including allocation methods, masking strategies, primary purpose, and other design elements.
RANDOMIZED
PARALLEL
TREATMENT
DOUBLE
Study Groups
Review each arm or cohort in the study, along with the interventions and objectives associated with them.
Collagen sponge group :
ten sites will be treated by MPI technique+ cortical lamina membrane and collagen sponge.
The jumping gap between implant and buccal plate of bone will be filled with collagen sponge.
Modified periosteal inhibition
After local anathesia, a traumatic extraction of the hopeless tooth will be made trying as much as possible to preserve the labial plate of bone and overlying soft tissue.
* Once the tooth is extracted, the socket is gently debrided and irrigated using sterile saline solution. Then the dental implant is placed in the best prosthetic driven position, following the guidelines for immediate implants using prefabricated computer guided surgical template.
* After accurate implant placement, a full-thickness flap will be elevated at mesial and distal papilla making a buccal envelope. A soft bone lamina will be trimmed and hydrated in sterile saline solution for 30 s to soften it; it should be 1-2 mm larger and deeper than the vestibular bone. Then the jumping gap between the dental implant and the buccal plate of bone will be filled using either collagen sponge or xenograft.
Bone graft group:
ten sites will be treated by MPI technique +cortical lamina membrane and xenograft collagen.
The jumping gap between implant and buccal plate of bone will be filled with xenograft collagen.
Modified periosteal inhibition
After local anathesia, a traumatic extraction of the hopeless tooth will be made trying as much as possible to preserve the labial plate of bone and overlying soft tissue.
* Once the tooth is extracted, the socket is gently debrided and irrigated using sterile saline solution. Then the dental implant is placed in the best prosthetic driven position, following the guidelines for immediate implants using prefabricated computer guided surgical template.
* After accurate implant placement, a full-thickness flap will be elevated at mesial and distal papilla making a buccal envelope. A soft bone lamina will be trimmed and hydrated in sterile saline solution for 30 s to soften it; it should be 1-2 mm larger and deeper than the vestibular bone. Then the jumping gap between the dental implant and the buccal plate of bone will be filled using either collagen sponge or xenograft.
Interventions
Learn about the drugs, procedures, or behavioral strategies being tested and how they are applied within this trial.
Modified periosteal inhibition
After local anathesia, a traumatic extraction of the hopeless tooth will be made trying as much as possible to preserve the labial plate of bone and overlying soft tissue.
* Once the tooth is extracted, the socket is gently debrided and irrigated using sterile saline solution. Then the dental implant is placed in the best prosthetic driven position, following the guidelines for immediate implants using prefabricated computer guided surgical template.
* After accurate implant placement, a full-thickness flap will be elevated at mesial and distal papilla making a buccal envelope. A soft bone lamina will be trimmed and hydrated in sterile saline solution for 30 s to soften it; it should be 1-2 mm larger and deeper than the vestibular bone. Then the jumping gap between the dental implant and the buccal plate of bone will be filled using either collagen sponge or xenograft.
Eligibility Criteria
Check the participation requirements, including inclusion and exclusion rules, age limits, and whether healthy volunteers are accepted.
Inclusion Criteria
2. Moderate to thick gingival phenotype.
3. Bone quality ranges from D2-D3 as gained from preoperative cone beam computed tomography.
4. Presence of at least 3 mm of keratinized gingiva.
5. Optimal compliance as evidenced by no missing treatment appointments and positive attitude towards oral hygiene.
Exclusion Criteria
2. Pregnant or lactating women.
3. Smoking
4. Absence of buccal plate of bone.
5. History of chemotherapy, radiotherapy in head and/or neck region.
6. Bisphosphonate therapy.
18 Years
60 Years
ALL
Yes
Sponsors
Meet the organizations funding or collaborating on the study and learn about their roles.
Tanta University
OTHER
Responsible Party
Identify the individual or organization who holds primary responsibility for the study information submitted to regulators.
Ghadeer Khalil Elbagoory
Associate lecturer
Principal Investigators
Learn about the lead researchers overseeing the trial and their institutional affiliations.
Ghadeer Elbagoory, Msc
Role: STUDY_CHAIR
Tanta University
Locations
Explore where the study is taking place and check the recruitment status at each participating site.
ElGharbiya
Tanta, , Egypt
Countries
Review the countries where the study has at least one active or historical site.
Central Contacts
Reach out to these primary contacts for questions about participation or study logistics.
Facility Contacts
Find local site contact details for specific facilities participating in the trial.
Other Identifiers
Review additional registry numbers or institutional identifiers associated with this trial.
OMPDR 4-24 2191
Identifier Type: -
Identifier Source: org_study_id
More Related Trials
Additional clinical trials that may be relevant based on similarity analysis.