Volar Carbon Plate Effects on Procedure Time

NCT ID: NCT05630430

Last Updated: 2024-05-30

Basic Information

• Recruitment Status: COMPLETED
• Clinical Phase: NA
• Total Enrollment: 42 participants
• Study Classification: INTERVENTIONAL
• Study Start Date: 2021-04-01
• Study Completion Date: 2024-05-28

Brief Summary

Radius distal end fractures are common orthopedic injuries. Many methods have been described in the treatment of distal radius fractures. The fixation of radius distal end fracture with volar plate was first applied by Ellis in 1965. Over the years, ideas have been put forward on the materials used for plates and the radiolucent carbon fiber plates has been used. These plates cause less artifact in computed tomography (CT) and magnetic resonance examinations (MRI), allow a better evaluation of the fracture, exhibit biomechanical characteristics close to the cortical bone, and do not cause a coldwedding in patients.

Detailed Description

Titanium alloy plates are frequently used materials in our current orthopedic surgery practices. The main goal during surgical treatment is to obtain an accurate and acceptable bone alignment. Achieving this goal as soon as possible will reduce additional morbidity and mortality and increase the success of treatment. Therefore, studies aiming to reduce the operation time come to the fore. When the literature is examined, there are limited number of studies on carbon plates. In these studies, it was reported that similar functional results were obtained with titanium alloy plates. Although the bones are at the surgeon's disposal in plate fixation of radius distal end fractures, fluoroscopy is frequently used for reduction control. The increase in the need for scopy both directly affects the duration of the operation and causes the surgical team to be exposed to excessive radiation. Since titanium alloy plates are radiopaque, they create a superposition to the fracture line and more than one view is usually required in each plane to ensure the reduction quality during surgery. Carbon alloy plates, on the other hand, offer the advantage of faster radiological reduction control because they do not create superposition to the fracture line. In our study, in addition to the comparisons in the literature, it is aimed to investigate the effect of carbon plates on the procedure time. For this purpose, distal radius fractured patients applied to our clinic will be treated with titanium and carbon plates after the necessary randomization. After the tourniquet is applied, the time elapsed until the fixation is completed, the duration of scopy, and the number of scopy images taken will be recorded. In the follow-ups, the functional scores and radiological measurements of the patients will be made and the complications will be evaluated.

Conditions

Radiation Exposure; Surgery; Radius Distal Fracture

Study Design

• Allocation Method: RANDOMIZED
• Intervention Model: PARALLEL
• Primary Study Purpose: TREATMENT
• Blinding Strategy: SINGLE

Study Groups

Volar Carbon Plate Effects on Procedure Time

Carbon alloy plates, offer the advantage of faster radiological reduction control because they do not create superposition to the fracture line

Group Type: EXPERIMENTAL

The Effect of Volar Carbon Plate Applications on Radiation Exposure and Procedure Time in Intra-articular Radius Distal End Fractures

Intervention Type: PROCEDURE

Surgery procedure, Although the bones are at the surgeon's disposal in plate fixation of radius distal end fractures, fluoroscopy is frequently used for reduction control. The increase in the need for scopy both directly affects the duration of the operation and causes the surgical team to be exposed to excessive radiation. Since titanium alloy plates are radiopaque, they create a superposition to the fracture line and more than one view is usually required in each plane to ensure the reduction quality during surgery. Carbon alloy plates, on the other hand, offer the advantage of faster radiological reduction control because they do not create superposition to the fracture line. In our study, in addition to the comparisons in the literature, it is aimed to investigate the effect of carbon plates on the procedure time. surgery time and exposure of radiation will be recorded at the end of the surgery

Titanium Alloy Plates Group

Titanium alloy plates are frequently used materials in our current orthopedic surgery practices. The main goal during surgical treatment is to obtain an accurate and acceptable bone alignment. Since titanium alloy plates are radiopaque, they create a superposition to the fracture line and more than one view is usually required in each plane to ensure the reduction quality during surgery.

Group Type: ACTIVE_COMPARATOR

The Effect of Volar Carbon Plate Applications on Radiation Exposure and Procedure Time in Intra-articular Radius Distal End Fractures

Intervention Type: PROCEDURE

Surgery procedure, Although the bones are at the surgeon's disposal in plate fixation of radius distal end fractures, fluoroscopy is frequently used for reduction control. The increase in the need for scopy both directly affects the duration of the operation and causes the surgical team to be exposed to excessive radiation. Since titanium alloy plates are radiopaque, they create a superposition to the fracture line and more than one view is usually required in each plane to ensure the reduction quality during surgery. Carbon alloy plates, on the other hand, offer the advantage of faster radiological reduction control because they do not create superposition to the fracture line. In our study, in addition to the comparisons in the literature, it is aimed to investigate the effect of carbon plates on the procedure time. surgery time and exposure of radiation will be recorded at the end of the surgery

Interventions

The Effect of Volar Carbon Plate Applications on Radiation Exposure and Procedure Time in Intra-articular Radius Distal End Fractures

Surgery procedure, Although the bones are at the surgeon's disposal in plate fixation of radius distal end fractures, fluoroscopy is frequently used for reduction control. The increase in the need for scopy both directly affects the duration of the operation and causes the surgical team to be exposed to excessive radiation. Since titanium alloy plates are radiopaque, they create a superposition to the fracture line and more than one view is usually required in each plane to ensure the reduction quality during surgery. Carbon alloy plates, on the other hand, offer the advantage of faster radiological reduction control because they do not create superposition to the fracture line. In our study, in addition to the comparisons in the literature, it is aimed to investigate the effect of carbon plates on the procedure time. surgery time and exposure of radiation will be recorded at the end of the surgery

Intervention Type: PROCEDURE

Other Intervention Names

Titanium Alloy Plate surgery; Carbon Alloy Plate surgery

Eligibility Criteria

Inclusion Criteria

• Radius distal simple intraarticular fractures
• Closed fractures

Exclusion Criteria

• Acompanying fracture at the same limb
• Open fractures
• Pathological fractures
• The patients who don't want to be included in the study

• Minimum Eligible Age: 18 Years
• Eligible Sex: ALL
• Accepts Healthy Volunteers: No

Sponsors

Ataturk University

OTHER

Sponsor Role: lead

Responsible Party

Muhammed Cagatay Engin

Principal Investigator

Responsibility Role: PRINCIPAL_INVESTIGATOR

Locations

Ataturk University

Erzurum, , Turkey (Türkiye)

Countries

Turkey (Türkiye)

Other Identifiers

1

Identifier Type: -

Identifier Source: org_study_id