Bilateral Premolar Extraction vs Distalization: A Randomised Clinical Trial
NCT ID: NCT04743258
Last Updated: 2021-02-08
Study Results
The study team has not published outcome measurements, participant flow, or safety data for this trial yet. Check back later for updates.
Basic Information
Get a concise snapshot of the trial, including recruitment status, study phase, enrollment targets, and key timeline milestones.
UNKNOWN
NA
34 participants
INTERVENTIONAL
2020-01-01
2022-10-31
Brief Summary
Review the sponsor-provided synopsis that highlights what the study is about and why it is being conducted.
Treatment of class II malocclusion due to maxillary protrusion without premolar extraction frequently requires distalization of maxillary molars into Class I molar relation by means of extra-oral or intraoral forces. Absolute skeletal anchorage, available 24 hours a day is an alternative method for molar distalization. Zygomatic miniplates fixed at a distance from the root apices, allows distalization of entire dentition as there is no interference between the fixation device and roots of the teeth.
Aims and Objectives: To evaluate dental, skeletal \& soft tissue changes achieved with maxillary premolar extraction vs full arch distalization.
Method of study: Patients will be allocated randomly to 2 groups-G1 and G2. Patients in G1 will undergo bilateral maxillary 1st premolar extraction before bonding followed by leveling \& alignment. Maxillary arch will be stabilized with the help of 0.019"×0.025" stainless steel wire. Hooks will be soldered on archwire used for stabilizing dentition. Mini implants will be placed under local anaesthesia between maxillary 2nd premolar \& 1st molar. Ni-Ti closed coil spring will be used to apply a force for en masse retraction of maxillary anterior teeth .
In G2, treatment will be initiated by bonding 0.022" slot MBT preadjusted edgewise appliance. Maxillary arch will be stabilized with the help of 0.019"×0.025" stainless steel wire. Zygomatic miniplates will be placed bilaterally. Hooks will be soldered on archwire used for stabilizing dentition. Ni-Ti closed coil spring will be used to apply a force .
Related Clinical Trials
Explore similar clinical trials based on study characteristics and research focus.
Root Resorption in Class II Div 1 Malocclusion in Upper 1st Premolar Extraction vs Distalization
NCT05639725
The Effect of Different Treatment Modalities of Class II Malocclusion on Upper Third Molars.
NCT06098885
Effect of Interceptive Strategies on the Clinical Outcome of Impacted Maxillary Permanent Canines
NCT06374329
Evaluation of the Levels of Pain, Discomfort, and Functional Impairment With Two Techniques of Retraction
NCT05652244
Evaluation of Distal Movement of Maxillary Dentition With Zygomatic Miniplates Using Cone Beam Computed Tomography
NCT03467555
Detailed Description
Dive into the extended narrative that explains the scientific background, objectives, and procedures in greater depth.
SOURCE OF DATA The study sample consists of 34 subjects selected from the patients attending the regular OPD at the Department of Orthodontics and DentofacialOrthopaedics for orthodontic treatment.
INCLUSION CRITERIA
* Non growing patients
* Complete bilateral Class II molar relationship at pre-treatment
* All permanent teeth upto the second molars should be present
* No or minor crowding in the maxillary arch
* Horizontal to average growth pattern.
EXCLUSION CRITERIA
* Subjects with a history of fixed orthodontic treatment.
* Crossbite
* Vertical growth pattern
* Any systemic disease affecting bone and general growth
* Poor oral hygiene
* Cleft patients
* Patients who fail to follow up or undergo complete treatment TARGET SAMPLE SIZE
* A sample size of 15 per group for the present study was calculated to detect a clinical difference of 3.9 mm with effect size 0.86 at 95% power and 5% significance level. To compensate for 10% dropouts the final sample size was calculated to be 17 per group.
INFORMED CONSENT OF THE PATIENT AND AGREEMENT TO BE RANDOMIZED A valid, written informed consent of the patient or parent/ guardian and an agreement to be randomized will be obtained from the patient before registering the patient in this clinical study. Patient will be informed about all the theoretical risks and benefits of the intervention under test (Annexure I). The patient will be given 72 hours to discuss the study with his/her family and take the decision regarding participation in the study.
RANDOMIZATION \& ALLOCATION CONCEALMENT Randomization will be done by a person not involved in the trial using computer generated randomization list. The study subjects will be blinded regarding intervention group.
INTERVENTION AND DESIGN OF STUDY The main intervention in this prospective clinical study is the extraction of bilateral maxillary first premolars before initial leveling and alignment with retraction of anterior teeth using mini implants in first group (G1) and is the placement of zygomatic miniplates after initial leveling and alignment of maxillary dental arch in second group(G2) . The study consists of 2 groups with equal allocation of subjects in each group:- Group 1 (G1):- In this group, bilateral maxillary 1st premolars will be extracted followed by Levelling \& alignment with 0.022" MBT preadjusted edgewise appliance. Maxillary arch will be stabilized with the help of 0.019" × 0.025" stainless steel wire. Placement of Mini implants bilaterally between maxillary 2nd premolar \& 1st molar under LA. Hooks will be soldered on archwire used for stabilizing dentition. Ni-Ti closed coil spring will be used to apply force . Regular follow up of the patient will be done and records including cephalograms and study models will be taken post 6 months of application of NiTi closed coil spring Group 2 (G2):- In this group treatment will be initiated with 0.022" MBT preadjusted edgewise appliance. Maxillary arch will be stabilized with the help of 0.019" × 0.025" stainless steel wire. After that, bilateral Maxillary third molar will be extracted, if present followed by placement of zygomatic miniplates bilaterally under LA.Hooks will be soldered on archwire used for stabilizing dentition. Ni-Ti closed coil spring will be used to apply force . Regular follow up of the patient will be done and records including cephalograms and study models will be taken post 6 months of application of NiTi closed coil spring DATA COLLECTION The investigator will record the patient's name, address and contact number and other relevant case history records (Annexure II) will be taken. Cephalometric radiographs will be recorded before treatment and after 6 months of application of NiTi closed coil spring for assessment of hard and soft tissue changes. The pretreatment and post 6 months of application of NiTi closed coil spring the cephalometric radiographs will be analyzed. The relevant values will be entered in a predesigned format. (Annexure III, IV). Soft tissue profile changes between pretreatment and post treatment will be assessed on lateral cephalogram and the raters- orthodontist, laypersons,patients,parents and general dentists will assess changes in facial appearance on a visual analog scale with profile photographs and comparison will be done between the two groups. Patient perception will be assessed using questionare rating by patient regarding various parameters at 1week, 2 weeks, 1 month and 6 months after the placement of zygomatic miniplate or extraction Quality of life will also be assessed using questionnaire rating by patient at pre-treatment, mid-treatment and post treatment. Occlusal status changes between pre and post treatment will be assessed using PAR index(peer assessment rating between 2 groups).
STATISTICAL ANALYSIS The data will be entered into Microsoft Excel and analyzed using SPSS 21(Statistical Package For Social Sciences) package for relevant statistical comparison. Results will be presented in the form of tables and graphs.
Descriptive statistics and inferential statistics will be used. Data will be checked for normality. In all the analysis, the level of significance will be set a 5 percent.
Conditions
See the medical conditions and disease areas that this research is targeting or investigating.
Study Design
Understand how the trial is structured, including allocation methods, masking strategies, primary purpose, and other design elements.
RANDOMIZED
PARALLEL
TREATMENT
SINGLE
Study Groups
Review each arm or cohort in the study, along with the interventions and objectives associated with them.
EXTRACTION
treatment of class II div 1 malocclusion with bilateral maxillary premolar extraction
MAXILLARY PREMOLAR EXTRACTION
Patients will undergo bilateral maxillary 1st premolar extraction before bonding followed by leveling \& alignment.
DISTALIZATION
treatment of class II div 1 malocclusion with distalization using zygomatic miniplates
DISTALIZATION
Maxillary arch will be distalized with the help Zygomatic miniplates will be placed bilaterally.
Interventions
Learn about the drugs, procedures, or behavioral strategies being tested and how they are applied within this trial.
MAXILLARY PREMOLAR EXTRACTION
Patients will undergo bilateral maxillary 1st premolar extraction before bonding followed by leveling \& alignment.
DISTALIZATION
Maxillary arch will be distalized with the help Zygomatic miniplates will be placed bilaterally.
Eligibility Criteria
Check the participation requirements, including inclusion and exclusion rules, age limits, and whether healthy volunteers are accepted.
Inclusion Criteria
2. Complete bilateral Class II molar relationship at pre-treatment
3. All permanent teeth upto the second molars should be present
4. No or minor crowding in the maxillary arch
5. Horizontal to average growth pattern.
Exclusion Criteria
2. Crossbite
3. Vertical growth pattern
4. Any systemic disease affecting bone and general growth
5. Poor oral hygiene
6. Cleft patients
7. Patients who fail to follow up or undergo complete treatment
18 Years
30 Years
ALL
Yes
Sponsors
Meet the organizations funding or collaborating on the study and learn about their roles.
Postgraduate Institute of Dental Sciences Rohtak
OTHER
Responsible Party
Identify the individual or organization who holds primary responsibility for the study information submitted to regulators.
Locations
Explore where the study is taking place and check the recruitment status at each participating site.
Post Graduate Institute of Dental Sciences
Rohtak, Haryana, India
Countries
Review the countries where the study has at least one active or historical site.
Central Contacts
Reach out to these primary contacts for questions about participation or study logistics.
Other Identifiers
Review additional registry numbers or institutional identifiers associated with this trial.
SONAL SURJEET
Identifier Type: -
Identifier Source: org_study_id
More Related Trials
Additional clinical trials that may be relevant based on similarity analysis.