SCO2T (Servo vs. Servo)

Study Results

Results pending

The study team has not published outcome measurements, participant flow, or safety data for this trial yet. Check back later for updates.

Basic Information

Get a concise snapshot of the trial, including recruitment status, study phase, enrollment targets, and key timeline milestones.

Recruitment Status

TERMINATED

Clinical Phase

NA

Total Enrollment

11 participants

Study Classification

INTERVENTIONAL

Study Start Date

2020-08-10

Study Completion Date

2023-05-03

Brief Summary

Review the sponsor-provided synopsis that highlights what the study is about and why it is being conducted.

Most premature babies require oxygen therapy. There is uncertainty about what oxygen levels are the best. The oxygen levels in the blood are measured using a monitor called a saturation monitor and the oxygen the baby breathes is adjusted to keep the level in a target range. Although there is evidence that lower oxygen levels maybe harmful, it is not known how high they need to be for maximum benefit. Very high levels are also harmful. Saturation monitors are not very good for checking for high oxygen levels. For this a different kind of monitor, called a transcutaneous monitor, is better.

Keeping oxygen levels stable is usually done by nurses adjusting the oxygen levels by hand (manual control). There is also equipment available that can do this automatically (servo control). It is not known which is best.

Studies of automated control have shown that infants spend more time within their intended target oxygen saturation range. These have not included measurements of transcutaneous oxygen. There are no previous studies directly comparing automated respiratory devices.

The investigators aim to show the transcutaneous oxygen levels as well as the oxygen saturation levels when babies have their oxygen adjusted using two automated (servo) control devices delivering nasal high flow.

For a period of 12 hours each baby will have their oxygen adjusted automatically using each devices for 6 hours respectively. The investigators will compare the range of oxygen levels that are seen between the two respiratory devices.

Related Clinical Trials

Explore similar clinical trials based on study characteristics and research focus.

Servo Controlled Oxygen Targeting (SCO2T) Study: Masimo vs. Nellcor

NCT04866342

Premature Premature Infant Oxygen Therapy +3 more

COMPLETED NA

Masimo O3 Regional Oximetry Device in Pediatric Patients Undergoing Cardiac Surgery

NCT04208906

Pediatric Cardiac Surgery

COMPLETED NA

Cerebral Oximetry in Single Lung Ventilation Thoracic Surgery

NCT01866657

Hypoxia

TERMINATED NA

Cardio-respiratory Responses During Hypoxic Exercise in Individuals Born Prematurely

NCT02780908

Hypoxia Altitude Sickness Tolerance

UNKNOWN NA

The Feasibility and Accuracy of Exhaled CO2 to Measure Cardiac Output in Ventilated Patients Without Tracheal Intubation

NCT00783679

Cardiac Physiology Cardiac Output

WITHDRAWN NA

Detailed Description

Dive into the extended narrative that explains the scientific background, objectives, and procedures in greater depth.

Presently oxygen is titrated against saturation (SpO2) by manual adjustment. Automated or servo-control systems have been developed that result in tighter control of SpO2 and more time spent in the intended target range. These systems are already in clinical use. Automated systems produce quite large fluctuations in fraction of inspired oxygen (FiO2) in order to keep SpO2 in range. It is possible that this could result in short periods of high or low oxygen tension (PO2) that are undetectable using saturation monitoring. Studies to date have examined the effects of manual and automated (servo) oxygen targeting on SpO2 but not on transcutaneous oxygen tension (TcPO2). There are no studies directly comparing two automated systems.

There is a need to determine the achieved SpO2 and TcPO2 distributions associated with the use of different automated control systems as a first step in planning future trials. When this is measured over a small number of hours it is not anticipated that this would have an influence on clinical outcome.

This study is a prospective, single centre, randomised crossover trial of two automated (servo) control devices - IntellO2 (Vapotherm, USA) versus Leoni plus CLAC (Löwenstein Medical, Germany) - delivering nasal high flow employing automated oxygen titration. Each infant will act as their own control. Infants born at less than 30 weeks gestation, greater than 48 hour of age and receiving supplementary oxygen will be eligible for inclusion.

The study will be undertaken in the Neonatal Unit at the Simpson Centre for Reproductive Health at the Royal Infirmary of Edinburgh.

Total study time is 12 hours for each infant. Infants will be randomised to commence on either automated (servo) control using either Leoni plus CLAC or IntellO2, Vapotherm. SpO2 (range 90-95%) will be continuously monitored as per normal standard of care. A second pulse oximetry probe will be place for servo control input.

Additional monitoring will be carried out as shown below:

1. TcPO2 monitoring
2. FiO2 monitoring
3. Heart rate monitoring (used to validate SpO2 readings)
4. Arterial gas sampling (only if conducted by the direct care team as part of the routine care of the infant; no extra blood samples will be taken as part of the study)

FiO2 will be adjusted by the respiratory support devices which have integrated automated oxygen control, set to maintain a SpO2 target range of 90-95%. The IntellO2 device uses Precision Flow technology (IntellO2, Vapotherm, USA). By means of a modified closed-loop algorithm, the devise uses Masimo pulse oximetry to target a user-set SpO2 value. The Leoni plus CLAC (Closed-Loop Automated oxygen Control) ventilator (Leoni plus, Löwenstein Medical, Germany) similarly uses MasimoSET (Signal Extraction Technology) to target SpO2 and automate oxygen control. Both devices have a signal averaging time of 8 seconds (Masimo, Irvine, USA). The Leoni plus CLAC algorithm is set to a 30 seconds wait time between adjustments, allowing up to 120 automated adjustments/hour.

SpO2 readings will be downloaded directly from the multiparameter patient monitor. SpO2 will be measured using a Phillips MX500 multiparameter monitor (Phillips, Germany, CE 0366). TcPO2 will be measured using a SenTec Digital Monitoring System with OxiVent sensor (SenTec AG, Switzerland, European patent No. 1535055, CE 0120). Both monitors are routinely used in clinical practice. Transcutaneous data will be recorded contemporaneously and the site of the transcutaneous probe will be rotated on each infant every 2 hours. Control of sensor temperature and application duration are designed to meet all applicable standards and this monitoring device is use routinely in many neonatal units.

Conditions

See the medical conditions and disease areas that this research is targeting or investigating.

Premature Infant Oxygen Therapy Hypoxia Hyperoxia Obstetric Labor, Premature

Study Design

Understand how the trial is structured, including allocation methods, masking strategies, primary purpose, and other design elements.

Allocation Method

RANDOMIZED

Intervention Model

CROSSOVER

This is a randomised cross-over study of servo-controlled oxygen targeting in premature infants, with infants acting as their own controls

Primary Study Purpose

TREATMENT

Blinding Strategy

NONE

This study is randomised but not blinded. Infants will be randomised to commence on either automated (servo) control using either Leoni plus CLAC or IntellO2, Vapotherm. SpO2 (range 90-95%) will be continuously monitored as per normal standard of care.

To remove selection bias the 20 infants will be randomised using sealed, windowless, envelopes. Half will instruct to commence on automated (servo) control using Leoni plus CLAC (Leoni plus, Löwenstein Medical, Germany) to target SpO2 to 90-95%, and half will have instructions to commence on automated (servo) control using IntellO2 Precision Flow (IntellO2, Vapotherm, USA).

Study Groups

Review each arm or cohort in the study, along with the interventions and objectives associated with them.

Servo control - Leoni plus CLAC

Automated control of oxygen. The oxygen saturation target range will be set to 90-95% as per standard practice.

Automated oxygen control can be overridden by manual adjustment of oxygen at any time if this is considered necessary to optimise control of oxygenation according to current clinical targets.

Group Type EXPERIMENTAL

Servo control (closed-loop automatic control of the inspiratory fraction of oxygen (FiO2)) - Leoni plus CLAC

Intervention Type DEVICE

FiO2 adjustments will be made by the Leoni plus CLAC (Closed-Loop Automated oxygen Control) ventilator (Leoni plus, Löwenstein Medical, Germany).

Manual adjustments of the inspired oxygen fraction can additionally be made as per standard care.

Servo control - IntellO2 Precision Flow, Vapotherm

Automated control of oxygen. The oxygen saturation target range will be set to 90-95% (set to maintain an integral value of 93%) as per standard practice.

Automated oxygen control can be overridden by manual adjustment of oxygen at any time if this is considered necessary to optimise control of oxygenation according to current clinical targets.

Group Type ACTIVE_COMPARATOR

Servo control (closed-loop automatic control of the inspiratory fraction of oxygen (FiO2)) - IntellO2 OAM

Intervention Type DEVICE

FiO2 adjustments will be made by the IntellO2 Oxygen Assist Module (OAM) for Precision Flow (IntellO2, Vapotherm, USA).

Manual adjustments of the inspired oxygen fraction can additionally be made as per standard care.

Interventions

Learn about the drugs, procedures, or behavioral strategies being tested and how they are applied within this trial.

Servo control (closed-loop automatic control of the inspiratory fraction of oxygen (FiO2)) - Leoni plus CLAC

FiO2 adjustments will be made by the Leoni plus CLAC (Closed-Loop Automated oxygen Control) ventilator (Leoni plus, Löwenstein Medical, Germany).

Manual adjustments of the inspired oxygen fraction can additionally be made as per standard care.

Intervention Type DEVICE

Servo control (closed-loop automatic control of the inspiratory fraction of oxygen (FiO2)) - IntellO2 OAM

FiO2 adjustments will be made by the IntellO2 Oxygen Assist Module (OAM) for Precision Flow (IntellO2, Vapotherm, USA).

Manual adjustments of the inspired oxygen fraction can additionally be made as per standard care.

Intervention Type DEVICE

Eligibility Criteria

Check the participation requirements, including inclusion and exclusion rules, age limits, and whether healthy volunteers are accepted.

Inclusion Criteria

1. Infants born at less than 30 weeks gestation
2. Infants greater than 48 hours of age
3. Infants who are receiving supplementary oxygen
4. Person with parental responsibility able to give consent

Exclusion Criteria

1. Congenital anomalies that would prevent targeting SpO2 to 90-95% (e.g. cardiac defects)
2. Clinical condition of an infant would impair accurateTcPO2 measurement (e.g. impaired perfusion or requirement of inotropic or vasopressor support)

Minimum Eligible Age

2 Days

Eligible Sex

ALL

Accepts Healthy Volunteers

Yes