Polygraphic Evaluation of the Effects of Different Rapid Maxillary Expansion Appliances on Sleep Quality

NCT ID: NCT04529213

Last Updated: 2020-08-27

Basic Information

• Recruitment Status: COMPLETED
• Clinical Phase: NA
• Total Enrollment: 46 participants
• Study Classification: INTERVENTIONAL
• Study Start Date: 2016-07-01
• Study Completion Date: 2017-05-17

Brief Summary

Rapid maxillary expansion (RME) is a commonly used orthodontic treatment in patients with maxillary constriction to provide skeletal expansion, correct posterior crossbite and resolve naso-respiratory problems by reducing oral respiration.The aim of this randomized controlled trial was to evaluate the effects of tooth-borne, tooth tissue-borne and bone-borne RME appliances on sleep quality with polygraphy. The null hypothesis was that there is no difference for the sleep quality between the appliances.

Detailed Description

Introduction. The aim of this 3-arm randomized controlled trial (RCT) was to evaluate the effects of tooth tissue-borne (KBME), tooth-borne (Hyrax), and bone-borne (MIDME) rapid maxillary expansion (RME) appliances on sleep quality with polygraphy.

Methods. This study was designed in parallel with an allocation ratio of 1:1:1. 46 patients with narrow maxilla and OSAS were included in this study and randomly assigned to three groups: tooth tissue-borne, tooth-borne and bone-borne expanders. Participants were congregated from the Department of Orthodontics, Faculty of Dentistry, Izmir Katip Celebi University, Turkey. In all groups, the expansion appliance was activated one-quarter turn twice a day until the desired suture opening was achieved. The primary outcome of this study was the correction of posterior crossbite. Secondary outcomes included polygraphic assessment of sleep parameters. Each subject participated in 1 overnight sleep test with polygraphy before the expansion (T0) and after a 3-month retention phase of treatment (T1). According to the results of polygraphy, 7 parameters; (apnea hypopnea index (AHI), number of apnea and hypopnea, desaturation index, lowest desaturation, average saturation, supin AHI) were examined to evaluate the changes in sleep scores. Kruskal-Wallis analysis and Dunn-Bonferroni test were used for inter-group comparisons and Wilcoxon analysis was used for intra-group evalaution. P<0.05 was accepted statistically significant. Computer-generated randomization was used with group allocation concealed using opaque, sealed envelopes. The outcome assessor was blinded to group assignment. The outcome assessor was blinded; however, it was not feasible to blind either operator or patients.

Conditions

Sleep Apnea Syndromes; Palatal Expansion Technique

Study Design

• Allocation Method: RANDOMIZED
• Intervention Model: PARALLEL
• Primary Study Purpose: TREATMENT
• Blinding Strategy: DOUBLE

Study Groups

Tooth tissue-borne (KBME) expander

In this tooth tissue-borne appliance, the occlusal surfaces of the molar and premolar teeth and half of the palatinal and buccal surfaces are covered with heat polymerized acrylic. Hyrax expansion screw is in the midline, as far as possible to the palate positioned close and parallel

Group Type: EXPERIMENTAL

Rapid Maxillary Expansion Treatment

Intervention Type: PROCEDURE

The patients were treated with KBME, Hyrax and MIDME maxillary expansion appliances, respectively. All expansion appliances containing a Hyrax expansion screw positioned parallel to the second premolars and were used to correct the posterior crossbite. In the MIDME group, two mini-screws with a diameter of 1.6 mm and a length of 10 mm are located on the right and left sides between the roots of the 2nd premolar and 1st molar teeth with 60-70° angle. KBME and Hyrax expansion appliances were cemented with glass ionomer cement and MIDME was cemented with using the light-cured composite. Same protocol was applied to all patients during RME treatment. Expansion screws in all groups were activated by two turns a day.

Tooth-borne (Hyrax) expander

In this tooth-borne expansion appliance, orthodontic bands are placed on the right and left 1st premolar and 1st molar teeth of the patients and the bands are soldered to the Hyrax expansion screw. The expansion screw is in the midline, as far as possible to the palate positioned close and parallel

Group Type: EXPERIMENTAL

Rapid Maxillary Expansion Treatment

Intervention Type: PROCEDURE

The patients were treated with KBME, Hyrax and MIDME maxillary expansion appliances, respectively. All expansion appliances containing a Hyrax expansion screw positioned parallel to the second premolars and were used to correct the posterior crossbite. In the MIDME group, two mini-screws with a diameter of 1.6 mm and a length of 10 mm are located on the right and left sides between the roots of the 2nd premolar and 1st molar teeth with 60-70° angle. KBME and Hyrax expansion appliances were cemented with glass ionomer cement and MIDME was cemented with using the light-cured composite. Same protocol was applied to all patients during RME treatment. Expansion screws in all groups were activated by two turns a day.

Bone-borne (MIDME) expander

This bone-borne expander includes 2 mini-screws with a diameter of 1.6 mm and a length of 10 mm on the right and left sides, coinciding between the roots of the 2nd premolar and 1st molar teeth in addition to the hyrax expansion screw.

Group Type: EXPERIMENTAL

Rapid Maxillary Expansion Treatment

Intervention Type: PROCEDURE

The patients were treated with KBME, Hyrax and MIDME maxillary expansion appliances, respectively. All expansion appliances containing a Hyrax expansion screw positioned parallel to the second premolars and were used to correct the posterior crossbite. In the MIDME group, two mini-screws with a diameter of 1.6 mm and a length of 10 mm are located on the right and left sides between the roots of the 2nd premolar and 1st molar teeth with 60-70° angle. KBME and Hyrax expansion appliances were cemented with glass ionomer cement and MIDME was cemented with using the light-cured composite. Same protocol was applied to all patients during RME treatment. Expansion screws in all groups were activated by two turns a day.

Interventions

Rapid Maxillary Expansion Treatment

The patients were treated with KBME, Hyrax and MIDME maxillary expansion appliances, respectively. All expansion appliances containing a Hyrax expansion screw positioned parallel to the second premolars and were used to correct the posterior crossbite. In the MIDME group, two mini-screws with a diameter of 1.6 mm and a length of 10 mm are located on the right and left sides between the roots of the 2nd premolar and 1st molar teeth with 60-70° angle. KBME and Hyrax expansion appliances were cemented with glass ionomer cement and MIDME was cemented with using the light-cured composite. Same protocol was applied to all patients during RME treatment. Expansion screws in all groups were activated by two turns a day.

Intervention Type: PROCEDURE

Eligibility Criteria

Inclusion Criteria

1. No previous tonsillar, nasal or adenoid surgery and orthodontic treatment,

2. Bilateral crossbite and need for RME,

3. Maxillary and mandibular permanent teeth fully erupted,

4. Willingness to participate in the study

Exclusion Criteria

1. the presence of adenotonsillectomy due to tonsillar hypertrophy or adenoidal hypertrophy

2. having nasal/nasopharyngeal /oropharyngeal pathologies, craniofacial syndromes, systemic disease, poor oral hygiene,

3. history of previous orthodontic treatment.

• Minimum Eligible Age: 12 Years
• Maximum Eligible Age: 14 Years
• Eligible Sex: ALL
• Accepts Healthy Volunteers: No

Sponsors

Izmir Katip Celebi University

OTHER

Sponsor Role: lead

Responsible Party

Gökçenur Gökçe

Assistant professor

Responsibility Role: PRINCIPAL_INVESTIGATOR

Principal Investigators

Gökçenur Gökçe, Phd

Role: PRINCIPAL_INVESTIGATOR

Izmir Katip Celebi University

Other Identifiers

0024

Identifier Type: -

Identifier Source: org_study_id