Effects of Bone Graft Placement at Implant Installation on Buccal Plate Stability
NCT ID: NCT01245920
Last Updated: 2012-08-30
Study Results
The study team has not published outcome measurements, participant flow, or safety data for this trial yet. Check back later for updates.
Basic Information
Get a concise snapshot of the trial, including recruitment status, study phase, enrollment targets, and key timeline milestones.
WITHDRAWN
NA
INTERVENTIONAL
2010-11-30
2012-05-31
Brief Summary
Review the sponsor-provided synopsis that highlights what the study is about and why it is being conducted.
The following will be measured: bone thickness and height adjacent to implant, inflammation of gum tissue, recession of gum tissue, bleeding, pocket depth, and implant success. Patients will be followed for 1 year, including evaluation time points at 2 weeks, 1 month, 3 and 6 months, and 1 year. Statistical analysis of the data will be conducted.
The hypothesis is that there is no difference with regard to bone thickness, bone height, pocket depth, bleeding, and implant success rate for grafted implant sites compared to non-grafted implant sites.
Detailed Description
Dive into the extended narrative that explains the scientific background, objectives, and procedures in greater depth.
Primary Intervention:
Surgical Procedures:
Patients will rinse with 0.12% chlorhexidine gluconate for 60 s before the surgery, and 2 g amoxicillin or 600 mg clindamycin (if allergic to penicillin) will be administered. Sulcular and crestal incisions will be placed in the area of the planned implant. A full-thickness mucoperiosteal flap will be reflected. Surgical placement of an endosseous dental implant (Prima Implant System, Keystone Dental) will be carried out according to manufacturer's recommendation with the use of a surgical template. Following preparation of the osteotomy site to receive the implant, the thickness of the residual buccal bone will be measured and recorded to the nearest 0.5 mm, at approximately 0.5 mm apical to the crest with a caliper. After placement of the implant, the distance between the bony crest and the top of the implant will be measured and recorded to the nearest 1 mm for the buccal aspect of each implant with a periodontal probe (UNC-15). Titanium cover screws will be attached to the implants.
If the patient meets the inclusion criteria (buccal plate thickness is ≥1 mm), the treatment will be selected randomly through a coin toss. Heads indicates the subject will be entered in the FDBA + membrane group. Tails indicates the subject will be entered in the control group (non-FDBA).
Periosteal releasing incisions will be made to adequately mobilize the full-thickness mucoperiosteal flap. For patients in the FDBA + membrane group, a layer 4 mm thick of cancellous allograft bone (Puros Cancellous, Zimmer Dental inc., Carlsbad, CA) will be placed over the buccal bone in the area of the implant. A resorbable collagen membrane (Bio-Gide, 13 x 25 mm, Osteohealth, Shirley, NY) will be trimmed to extend 5 mm beyond the implant borders and to cover the implant head. Following membrane placement over the bone graft, the gingival flaps will be closed and sutured with 4-0 Vicryl (Ethicon Inc., Sommerville, NJ) with passive tension flap closure. Patients in the non-FDBA group will have gingival flaps closed with the same suturing technique. A post-operative periapical radiograph will be exposed of the implant.
Post-operative care will include oral administration of 500 mg amoxicillin 3 times daily for 7 days or 300 mg clindamycin 3 times daily for 7 days. Ibuprofen 600 mg every 8 h for 5 days will be prescribed for analgesics. Patients will be instructed to rinse with 0.12% chlorhexidine gluconate (Peridex, Zila Inc. Pheonix, AZ) twice daily for 1 month. Sutures will be removed 2 weeks post-surgery. Post-surgical evaluations will be provided at 2 weeks, 1 month, 3, and 6 months.
Stage II surgery will be performed 6 months after implant placement using the same flap design as the implant placement surgery. The titanium cover screw will be removed, and replaced with a titanium healing abutment. The distance from the bony crest to the top of the implant will be measured using the same technique described at the implant placement surgery. The buccal bone thickness will be measured by recording the distance from the buccal implant surface to the outer buccal bone crest to the nearest 1 mm using a periodontal probe (UNC-15). Photos of the study site will be taken at each surgical procedure and at each follow-up appointment.
Post-Surgical Clinical Measurements:
The following clinical measurements will be obtained with a plastic periodontal probe at 6 sites at each implant (Colorview, Hu-Friedy, Chicago, IL) and recorded to the nearest millimeter: probing depth, gingival margin position, bleeding on probing, and gingival index. The gingival index will be assessed according to Silness and Loe on a scale of 0-3. Implant mobility will also be assessed using an instrument handle and a finger. The soft tissue clinical measurements will be obtained at the following time periods: 1 month following Stage II surgery and 6 months following Stage II surgery (1 year after implant placement). Final implant abutments and crowns will proceed according to the original treatment plan of the patient.
Conditions
See the medical conditions and disease areas that this research is targeting or investigating.
Keywords
Explore important study keywords that can help with search, categorization, and topic discovery.
Study Design
Understand how the trial is structured, including allocation methods, masking strategies, primary purpose, and other design elements.
RANDOMIZED
PARALLEL
TREATMENT
NONE
Study Groups
Review each arm or cohort in the study, along with the interventions and objectives associated with them.
FDBA + Membrane Group
For patients in the FDBA + membrane group, a layer 4 mm thick of cancellous allograft bone (Puros Cancellous, Zimmer Dental inc., Carlsbad, CA) will be placed over the buccal bone in the area of the implant. A resorbable collagen membrane (Bio-Gide, 13 x 25 mm, Osteohealth, Shirley, NY) will be trimmed to extend 5 mm beyond the implant borders and to cover the implant head. Following membrane placement over the bone graft, the gingival flaps will be closed and sutured with 4-0 Vicryl (Ethicon Inc., Sommerville, NJ) with passive tension flap closure.
DFDBA + Bio-Gide Membrane
For patients in the FDBA + membrane group, a layer 4 mm thick of cancellous allograft bone (Puros Cancellous, Zimmer Dental inc., Carlsbad, CA) will be placed over the buccal bone in the area of the implant. A resorbable collagen membrane (Bio-Gide, 13 x 25 mm, Osteohealth, Shirley, NY) will be trimmed to extend 5 mm beyond the implant borders and to cover the implant head. Following membrane placement over the bone graft, the gingival flaps will be closed and sutured with 4-0 Vicryl (Ethicon Inc., Sommerville, NJ) with passive tension flap closure.
Non-FDBA
Patients in the non-FDBA group will have gingival flaps closed with the same suturing technique.
Non-FDBA
Patients in the non-FDBA group will have gingival flaps closed with the same suturing technique.
Interventions
Learn about the drugs, procedures, or behavioral strategies being tested and how they are applied within this trial.
DFDBA + Bio-Gide Membrane
For patients in the FDBA + membrane group, a layer 4 mm thick of cancellous allograft bone (Puros Cancellous, Zimmer Dental inc., Carlsbad, CA) will be placed over the buccal bone in the area of the implant. A resorbable collagen membrane (Bio-Gide, 13 x 25 mm, Osteohealth, Shirley, NY) will be trimmed to extend 5 mm beyond the implant borders and to cover the implant head. Following membrane placement over the bone graft, the gingival flaps will be closed and sutured with 4-0 Vicryl (Ethicon Inc., Sommerville, NJ) with passive tension flap closure.
Non-FDBA
Patients in the non-FDBA group will have gingival flaps closed with the same suturing technique.
Other Intervention Names
Discover alternative or legacy names that may be used to describe the listed interventions across different sources.
Eligibility Criteria
Check the participation requirements, including inclusion and exclusion rules, age limits, and whether healthy volunteers are accepted.
Inclusion Criteria
2. Subjects treatment plan includes the placement of at least one endosseous dental implant in the maxillary or mandibular arch.
3. Subjects must present with at least 1 mm buccal bone thickness immediately after surgical placement of endosseous dental implant.
4. Subjects must demonstrate a plaque index of ≤20%.
5. Subjects who can read, understand, and sign an institutional review board approved informed consent.
Exclusion Criteria
2. Subjects who take corticosteroids, immunosuppressant, bisphosphonates, radiation treatments, and/or chemotherapeutics that could compromise wound healing process.
3. Subjects with acute infectious lesions in the area of study.
4. Subjects under 21 years of age.
5. Subjects with previous failed endosseous dental implant at the site of study.
6. Smokers.
7. Subjects with dehiscence of implant surface \> 1 mm immediately after surgical placement of endosseous dental implant.
21 Years
ALL
Yes
Sponsors
Meet the organizations funding or collaborating on the study and learn about their roles.
Nebraska Society of Periodontology
UNKNOWN
Creighton University
OTHER
Responsible Party
Identify the individual or organization who holds primary responsibility for the study information submitted to regulators.
Creighton University
Principal Investigators
Learn about the lead researchers overseeing the trial and their institutional affiliations.
Melissa S Lang, DDS, MS
Role: PRINCIPAL_INVESTIGATOR
Creighton University School of Dentistry
Locations
Explore where the study is taking place and check the recruitment status at each participating site.
Creighton University School of Dentistry
Omaha, Nebraska, United States
Countries
Review the countries where the study has at least one active or historical site.
Other Identifiers
Review additional registry numbers or institutional identifiers associated with this trial.
10-15770
Identifier Type: -
Identifier Source: org_study_id