Scale for Evaluating Oral and Pharyngolaryngeal Symptoms After General Anesthesia
NCT ID: NCT06755853
Last Updated: 2025-08-19
Study Results
The study team has not published outcome measurements, participant flow, or safety data for this trial yet. Check back later for updates.
Basic Information
Get a concise snapshot of the trial, including recruitment status, study phase, enrollment targets, and key timeline milestones.
RECRUITING
450 participants
OBSERVATIONAL
2025-05-01
2026-06-01
Brief Summary
Review the sponsor-provided synopsis that highlights what the study is about and why it is being conducted.
The assessment of pharyngolaryngeal symptoms is critical for more effective management of patients throughout the treatment process and for optimizing their care. Early recognition and management of these symptoms by nurses and other healthcare professionals can reduce complications and increase patient satisfaction.
There is no standard scale in the literature that can assess and classify these symptoms after surgical anesthesia. Existing assessments usually address symptoms separately and are usually performed with subjective measurements. The aim of this study was to develop a scale that can more systematically assess oral and pharyngolaryngeal symptoms such as sore throat, hoarseness, and difficulty swallowing after surgical interventions. Conducting validity and reliability tests of this scale will be an important step in improving patient care during surgical procedures and managing postoperative symptoms more effectively. The aim of this study was to develop a scale to assess pharyngolaryngeal symptoms after general anesthesia and to determine its validity and reliability.
Related Clinical Trials
Explore similar clinical trials based on study characteristics and research focus.
The Predictive Value of Videoryngoscopy in Preoperative Airway Evaluation in Obese Patients
NCT05424289
The Effect of Monitoring Endotracheal Tube Cuff Pressure and Keeping it in a Certain Range
NCT06353932
Airway Ultrasound vs Clinical Predictors for Difficult Airway
NCT07243106
Comparison of Ultrasonographic and Anthropometric Measurements in Difficult Airway Evaluation
NCT04140981
Comparison of the Effects of Preoperative Anesthesia Evaluation on Preoperative Anxiety Using Anxiety Scales and Evaluation of Patient Satisfaction
NCT06849583
Detailed Description
Dive into the extended narrative that explains the scientific background, objectives, and procedures in greater depth.
In order to test the validity and reliability of the Oral and Pharyngolaryngeal Symptoms Evaluation Scale after General Anesthesia, the following application steps will be followed.
Scope Validity The items of the draft scale prepared by the researcher will be asked to be evaluated by experts in the field of Turkish Language and Literature in terms of spelling errors and semantic integrity. Semantic shifts, spelling errors and incorrect expressions will be corrected in line with the feedback given by the experts.
Expert opinion will be sought to ensure the scope validity of the draft scale (each item/question). Scope/content validity is the extent to which the scale as a whole and each item in the scale serves the purpose. Content validity can be evaluated by experts using various techniques. In the Davis technique, items are graded as "appropriate", "item should be slightly revised", "item should be seriously revised" and "item is not appropriate". In this technique, the number of experts who mark the appropriateness of the items and the items should be slightly revised is divided by the total number of experts to obtain the "content validity index" for the item. This value being 0.80 is an acceptable level. A minimum of five and a maximum of 20 experts are sufficient for the Davis technique. Therefore, a minimum of 5 and a maximum of 20 experts will be reached within the scope of the research. For expert opinions, the evaluations of the Anesthesiologist who frequently encounters pharyngolaryngeal symptoms after general anesthesia, surgical nurses in the recovery/recovery unit and academicians in the Surgical Diseases Nursing program will be taken.
Surface Validity A pilot study of the draft scale, whose content validity is provided after the expert opinion, will be conducted. The surface validity of the scale will be ensured with the pilot study. Surface validity is a criterion determined by the researcher himself/herself and the opinions of experts/non-experts on the subject regarding whether a scale measures the structure being investigated. Necessary changes will be made in the meaning and structure in line with the feedback received after the pilot study (Pilot 1 Application). If there is no change in the meaning and structure of the items after the Pilot 1 application, the scale will be applied to a large sample group for the main application of the scale development study. Item analyses will be started with the main application. However, if changes are made to the meaning and structure of the items after the Pilot 1 application, a second expert assessment will be made for content validity.
A pilot study (Pilot 2 application) will be conducted again after the expert opinion is received for the second time. After the integrity of the meaning and structure of the items is determined with the Pilot 2 application, the main application of the scale development study will be conducted. In the main application, the scale will be applied to a large sample group and item analyses will be started and validity-reliability will be tested.
Construct Validity If there is no criterion (reference) to compare the new scale, construct validity should be tested. It provides an explanation of the result obtained from the scale and what this result is related to. It is related to how accurately the prepared scale items measure the specified characteristics. Different researchers point out different methods to evaluate construct validity. The most frequently mentioned of these is factor analysis. Factor Analysis is a construct validity technique used to reveal whether there is a certain order between the responses of the participants to the items in the developed scale. The factor analysis method is used to reveal the basic structure underlying a large number of variables. The aim of this process is to reduce the structure to a smaller number of basic dimensions in order to facilitate the understanding and interpretation of the relationships between a large number of variables thought to be related to each other. Accordingly, Explanatory Factor Analysis (EFA) and Confirmatory Factor Analysis (CFA) will be conducted to ensure the validity of the structure in the research. The acceptable level of factor loading is related to the sample size. For example, if the sample size of a study is at least 350, the acceptable factor loading can be 0.30 or higher. Similarly, for a study with a sample size of at least 200, this value can be 0.40 or higher, and for a study requiring a sample size of at least 120, this value can be 0.50 or higher. If the sample size is 85, the acceptable factor loading should be 0.60 or higher. In a study with a sample size of 60, this value should be 0.70 or higher. Factor loading will be determined according to the sample size and items with low factor loadings will be removed from the draft scale.
Reliability Reliability is the measure of the consistency of the measurement. It is the degree to which the measurement results are free from errors. The measurement results should give similar results when applied in different places. In other words, similar stable results should be obtained in independent measurements. Reliability indicates the extent to which a scale accurately measures the feature it is intended to measure, the productivity and continuity of the scale. For reliability, the test should be repeatable and transferable. Reliability is usually assessed by methods such as internal consistency, parallel (equivalent) forms, test-retest, inter-observer reliability (scoring consistency). Internal consistency and parallel (equivalent) forms methods will be used to test the reliability of the study. When developing a scale, if it consists of questions or items of the same difficulty level and the same content, it can be converted into two equivalent (parallel) forms. In order for the measurements to be equivalent, they must measure the same variable and their means and standard deviations must be equal. In this direction, Visual Analog Scale (VAS) which has a total of 10 symptoms consisting of the same content as the draft scale will be used to determine the parallel form reliability of the draft scale. The correlation between the forms is calculated and interpreted as the reliability coefficient. The internal consistency of a measurement tool is a measure of whether the different items of the tool measure the same concept. There are different calculation and statistical methods for internal consistency analysis. These are: Average of inter-item correlation coefficients, Average of item-total score correlation coefficients, Correlation analysis of binary values and Cronbach's alpha value. The internal consistency of a measurement tool is usually evaluated with statistical methods such as Cronbach's Alpha. With this method, it is determined whether the items are consistent with each other and whether the items measure a hypothetical variable in Likert-type additive scales. High internal consistency coefficients generally above 0.70 indicate that the measurement tool is reliable. The split-half method (split-half method) is also a method used for reliability, in cases where the test can be divided into two halves and a score can be obtained. The method is based on the similarity of the scores obtained from both halves of the sample if the relevant measurement tool is reliable. The method of splitting into two halves can be done as single items-double items or in random order. The correlation between the two halves obtained shows whether it is a reliable measurement tool. The correlation coefficient being above 0.70, that is, being close to 1, shows that the relevant tool is reliable. In the study, Cronbach's Alpha and the relationship coefficient value after the split-half method will be examined to determine reliability. In addition, the average of the Item-total score correlation coefficients will be examined to increase reliability. In this statistical method, it is the correlation of the total scores of the scale with the scores of each item. The average of the item-total score correlation coefficients gives the reliability of the test.
Conditions
See the medical conditions and disease areas that this research is targeting or investigating.
Study Design
Understand how the trial is structured, including allocation methods, masking strategies, primary purpose, and other design elements.
OTHER
PROSPECTIVE
Study Groups
Review each arm or cohort in the study, along with the interventions and objectives associated with them.
patients receiving general anesthesia
During general anesthesia, endotracheal intubation or laryngeal mask is usually used to ensure airway patency and prevent aspiration. Both endotracheal tube the researcher will meet face to face with the sample group who volunteered to participate in the study and apply the Informed Consent Form and Sociodemographic Characteristics Form (questions 1-9) before surgery. After surgery, the patient will fill in questions 10-20 of the Sociodemographic Characteristics Form according to the information received from the patient file or healthcare personnel. The Post-General Anesthesia Oral and Pharygolaryngeal Symptoms Assessment Scale will be applied at the 2nd hour after surgery. As a result of the literature review, it was seen that pharyngolaryngeal symptoms were generally evaluated at the 1st, 2nd and 24th hours after surgery.
No interventions assigned to this group
Eligibility Criteria
Check the participation requirements, including inclusion and exclusion rules, age limits, and whether healthy volunteers are accepted.
Inclusion Criteria
* Patients who have received general anesthesia
* Patients who are conscious
* Patients who can communicate verbally
* Patients who volunteer to participate in the study
Exclusion Criteria
* Patients who have any discomfort in the oral-pharynx-larynx regions
* Patients who have undergone any surgical intervention in the oral-pharynx-larynx regions.
18 Years
65 Years
ALL
No
Sponsors
Meet the organizations funding or collaborating on the study and learn about their roles.
Nuh Naci Yazgan University
OTHER
Responsible Party
Identify the individual or organization who holds primary responsibility for the study information submitted to regulators.
Fadime Ertural
Principal Investigator
Principal Investigators
Learn about the lead researchers overseeing the trial and their institutional affiliations.
Fadime Ertural, Lecturer
Role: PRINCIPAL_INVESTIGATOR
Nuh Naci Yazgan University
Salime Mucuk, Prof. Dr.
Role: STUDY_DIRECTOR
TC Erciyes University
Locations
Explore where the study is taking place and check the recruitment status at each participating site.
Erciyes Universty
Kayseri, Türkiye, Turkey (Türkiye)
Countries
Review the countries where the study has at least one active or historical site.
Central Contacts
Reach out to these primary contacts for questions about participation or study logistics.
Facility Contacts
Find local site contact details for specific facilities participating in the trial.
Other Identifiers
Review additional registry numbers or institutional identifiers associated with this trial.
SEOPSAGA
Identifier Type: -
Identifier Source: org_study_id
More Related Trials
Additional clinical trials that may be relevant based on similarity analysis.