Efficacy of Non-surgical and Surgical Surface Decontamination Methods on Peri-implantitis-affected Implants

NCT ID: NCT06430268

Last Updated: 2025-06-05

Basic Information

• Recruitment Status: ENROLLING_BY_INVITATION
• Clinical Phase: NA
• Total Enrollment: 90 participants
• Study Classification: INTERVENTIONAL
• Study Start Date: 2024-05-21
• Study Completion Date: 2027-06-30

Brief Summary

This study will compare 2 methods to clean contaminated implant surfaces: air-polishing device versus titanium curette. Both of these methods will be used in the non-surgical and surgical setting, followed by implant removal. Then, in-vitro analysis to assess the efficacy of surface decontamination will be performed.

Detailed Description

A screening visit will be performed to determine the elegibility of the individuals to participate in the study. Information related to the target implant (e.g., brand, material, surface, dimensions, time of function, history of treatment of peri-implantitis) and reconstruction (e.g., cemented or screwed prosthesis, single, multi-unit or full-arch) will be collected. Intra-oral radiographs will be obtained or exported from patients' dental records, and the marginal bone level (MBL) will be measured at the mesial and distal aspects of the implants by one calibrated investigator using an image analysis software (Image J; National Institutes of Health, Bethesda, MD, USA). The anatomy of the bone defect will be determined.

Randomization will be performed in a stratified manner, in sets of 10 implants, by a computer software, to obtain equally balanced groups based on implant characteristics (site, brand, design). A researcher not involved in the clinical interventions will be responsible for randomization.

At the day of implant removal, a single calibrated examiner will assess the following parameters at six sites around each experimental implant using an UNC 15 periodontal probe: (1) Plaque accumulation, using the modified plaque index [mPI]; (2) Probing depth (mm); (3) Bleeding on probing, using the modified gingival index [mGI] ; (4) Suppuration; (5) Recession (mm). The width of keratinized mucosa (KM) will be obtained in the mid-buccal and mid-lingal aspect of the implants (mm). A standard tessellation language (STL) file of the arch of interest using an intraoral optical scanner (Trios 3, 3Shape, Denmark) will be obtained.

Surface decontamination protocols:

All cleaning procedures will be performed without the suprastructures. A notch will be performed on the buccal side of all implant shoulders with the aid of a bur, in order to distinguish the different implant surfaces during the microbiological and biocompatibility analysis phases.

Following local anesthesia, implants will be randomly assigned to the following study groups:

1. Non-surgical decontamination with titanium curettes prior to implant removal (n = 20);

2. Non-surgical decontamination with erythritol powder prior to implant removal (n = 20);

3. Surgical decontamination with titanium curettes prior to implant removal (n = 20);

4. Surgical decontamination with erythritol powder prior to implant removal (n = 20);

5. No decontamination prior to implant removal (n=10).

In the surgical groups, intra-sulcular and, if necessary, vertical releasing incisions will be performed. Full-thickness flaps will be elevated in the buccal and lingual aspects and the granulation tissue will be removed.

All giant (visible) calculus will be removed with an ultrasonic tip in advance, without touching the implant surface directly. Copious irrigation with saline will be performed in both groups prior to implant decontamination. All implants will be cleaned by the same operator with the aid of dental surgical loupes. The time needed for the operator to consider the implant surface clean will be recorded.

• Titanium curettes (Hu-Friedy, Chicago, Illinois, USA) will be used for supra and submucosal around the implants.
• Air-polishing (Airflow Prophylaxis Master, EMS, Nyon, Switzerland) will be carried out with AIR-FLOW powder PLUS (EMS) containing erythritol (sugar alcohol, 14 μm), amorphous silica and 0.3% chlorhexidine. The device will be adjusted to a power setting of 5 bar static pressure and a maximum level of irrigation with water.

• Non-surgical group: The supramucosal implant surfaces will be cleaned with the Airflow handpiece, while for the submucosal areas, a Perioflow handpiece and nozzle for submucosal instrumentation will be used. The nozzle will be changed after cleaning each implant.
• Surgical group: The Airflow handpiece will be moved in a horizontal direction along implant threads from an apical to a coronal position. The angulation of the handpiece and working distance will not be standardized as they may vary according to the area being cleaned.

Implant removal:

Once the decontamination procedure has been completed, all the implants will be explanted with the aid of a reverse torque device (Implant Removal Kit; Zimmer Biomet); no trephines will be used. During the procedure, care will be taken to avoid damage to the implant and its surface. The retrieved implants will be immersed in a transport medium (Dulbecco's Modified Eagle Medium) and stored in sterile plastic vials at 4°C until further analysis.

In all study groups, the explanted sites will be again curetted and the soft tissues will be sutured with interrupted or crossed sutures. Subjects will receive detailed verbal and written postoperative instructions, as well as a prescription for anti-inflammatory medication (ibuprofen [600mg], for 3-5 days, as needed for pain control). Patients will be instructed to rinse gently with 0.12% chlorhexidine twice daily for 1 week. Sutures will be removed after 2 weeks.

Subsequently, a second randomization will take place to direct each implant (n = 10 in each decontamination group) for microbiological/elementary composition analysis and biocompatibility analysis. In-vitro analysis post surface decontamination includes assessing the cleaning efficacy, microbiological analysis, biocompatibility analysis including cultivation of cells, RNA extraction, Reverse Transcription (RT) and Real-Time RT-Polymerase Chain Reaction (Real-Time RT-PCR) , and elementary composition analysis including implant surface degradation, corrosion performance and atomic composition.

Conditions

Peri-Implantitis; Dental Implant Failed

Study Design

• Allocation Method: RANDOMIZED
• Intervention Model: PARALLEL
• Primary Study Purpose: TREATMENT
• Blinding Strategy: SINGLE

Study Groups

Non-surgical decontamination with titanium curettes followed by explantation

Titanium curettes (Hu-Friedy, Chicago, Illinois, USA) will be used for supra and submucosal around the implants without any flap elevation.

Group Type: EXPERIMENTAL

implant decontamination with titanium curette

Intervention Type: PROCEDURE

Titanium curettes (Hu-Friedy, Chicago, Illinois, USA) will be used for supra and submucosal around the implant, with and without flap elevation.

Non-surgical decontamination with erythritol powder prior to implant removal

Without any flap elevation, the supramucosal implant surfaces will be cleaned with the Airflow handpiece, while for the submucosal areas, a Perioflow handpiece and nozzle for submucosal instrumentation will be used. The nozzle will be changed after cleaning each implant.

Group Type: EXPERIMENTAL

implant decontamination with Air-Flow device

Intervention Type: DEVICE

Air-polishing (Airflow Prophylaxis Master, EMS, Nyon, Switzerland) will be carried out with AIR-FLOW powder PLUS (EMS) containing erythritol (sugar alcohol, 14 μm), amorphous silica and 0.3% chlorhexidine to decontaminate implants with and without flap elevation. The device will be adjusted to a power setting of 5 bar static pressure and a maximum level of irrigation with water.

Surgical decontamination with titanium curettes prior to implant removal

Intra-sulcular and, if necessary, vertical releasing incisions will be performed. Full-thickness flaps will be elevated in the buccal and lingual aspects and the granulation tissue will be removed. Titanium curettes (Hu-Friedy, Chicago, Illinois, USA) will be used for supra and submucosal around the implants

Group Type: EXPERIMENTAL

implant decontamination with titanium curette

Intervention Type: PROCEDURE

Titanium curettes (Hu-Friedy, Chicago, Illinois, USA) will be used for supra and submucosal around the implant, with and without flap elevation.

Surgical decontamination with erythritol powder prior to implant removal

Intra-sulcular and, if necessary, vertical releasing incisions will be performed. Full-thickness flaps will be elevated in the buccal and lingual aspects and the granulation tissue will be removed.The Airflow handpiece will be moved in a horizontal direction along implant threads from an apical to a coronal position. The angulation of the handpiece and working distance will not be standardized as they may vary according to the area being cleaned.

Group Type: EXPERIMENTAL

implant decontamination with Air-Flow device

Intervention Type: DEVICE

Air-polishing (Airflow Prophylaxis Master, EMS, Nyon, Switzerland) will be carried out with AIR-FLOW powder PLUS (EMS) containing erythritol (sugar alcohol, 14 μm), amorphous silica and 0.3% chlorhexidine to decontaminate implants with and without flap elevation. The device will be adjusted to a power setting of 5 bar static pressure and a maximum level of irrigation with water.

No decontamination prior to implant removal

No decontamination will be performed on implants in this group.

Group Type: NO_INTERVENTION

No interventions assigned to this group

Interventions

implant decontamination with titanium curette

Titanium curettes (Hu-Friedy, Chicago, Illinois, USA) will be used for supra and submucosal around the implant, with and without flap elevation.

Intervention Type: PROCEDURE

implant decontamination with Air-Flow device

Air-polishing (Airflow Prophylaxis Master, EMS, Nyon, Switzerland) will be carried out with AIR-FLOW powder PLUS (EMS) containing erythritol (sugar alcohol, 14 μm), amorphous silica and 0.3% chlorhexidine to decontaminate implants with and without flap elevation. The device will be adjusted to a power setting of 5 bar static pressure and a maximum level of irrigation with water.

Intervention Type: DEVICE

Eligibility Criteria

Inclusion Criteria

• Adult individuals between 18 and 80 years of age who require the explantation of at least one titanium or titanium alloy implant due to severe peri-implantitis (> 50% bone loss and signs of inflammation);
• Individuals who did not undergo surgical or non-surgical peri-implant therapy in the previous 6 months.

Exclusion Criteria

• Acute infection associated with adjacent teeth;
• Any technical complication that does not allow implant removal using a reverse torque device;
• Active infectious diseases of any kind;
• Medical conditions which requires premedication prior to dental treatments/visits;
• Pregnant women or planning to become pregnant (self-reported);
• History of radiotherapy in the head and neck or chemotherapy in the last 3 years;
• Any other diseases or medications that may contraindicate the surgical procedure or compromise wound healing.

• Minimum Eligible Age: 18 Years
• Maximum Eligible Age: 80 Years
• Eligible Sex: ALL
• Accepts Healthy Volunteers: No

Sponsors

Association for Dental Infection Control

UNKNOWN

Sponsor Role: collaborator

Andrea Ravida

OTHER

Sponsor Role: lead

Responsible Party

Andrea Ravida

Assistant Professor

Responsibility Role: SPONSOR_INVESTIGATOR

Principal Investigators

Andrea Ravida, DDS MS PhD

Role: PRINCIPAL_INVESTIGATOR

University of Pittsburgh

Locations

University of Pittsburgh, School of Dental Medicine

Pittsburgh, Pennsylvania, United States

Countries

United States

Other Identifiers

STUDY23100029

Identifier Type: -

Identifier Source: org_study_id