Use of Anatomical Landmark in Locate Occlusal Plane.

NCT ID: NCT04694196

Last Updated: 2025-09-15

Basic Information

• Recruitment Status: COMPLETED
• Clinical Phase: NA
• Total Enrollment: 40 participants
• Study Classification: INTERVENTIONAL
• Study Start Date: 2021-09-20
• Study Completion Date: 2021-12-01

Brief Summary

Occlusal plane "the average plane established by the incisal and occlusal surfaces of the teeth -The glossary of prosthodontic terms. Generally, it is not a plane but represents the planar mean of the curvature of these surfaces".

Correct orientation of the occlusal plane plays a vital role in achieving optimal aesthetics, occlusal balance and function of complete dentures. Faulty orientation of occlusal plane in fixed or removable prostheses will affect the interaction between tongue and buccinator muscle resulting in food collection in sulcus and cheek or tongue biting.

The occlusal plane is normally established anteriorly according to aesthetics of patient and posteriorly parallel to camper's plane.

In the mandibular arch there are few landmarks which could be used to orient the occlusal plane like the retromolar pad, commissure of the lips and lateral borders of the tongue.

Various landmark have been used to orient the occlusal plane in the maxillary arch e.g. parotid papilla, hamular notch- incisive papilla plane, ala-tragus line.

There is no single method seems entirely accurate to locate the occlusal plane in edentulous patients. Therefore ,Investigators need a stable anatomic landmark can be used as a guide to determine occlusal plane (OP).

Material and Methods:

Forty Dentulous patients will be selected. All subjects had natural maxillary and mandibular teeth. In addition all subjects exhibited Class I skeletal and dental relationships with no prosthetic dental replacement. Subjects with Claa II or Class III relationships,fractured or abraded edges of the teeth,ankyloglossia and orthodontic treatment were excluded from the study. The mandibular posterior occlusal plane was determined according to the level of coronoid notch{CN} (greatest concavity anterior border of the ramus) by measure the distance between the occlusal plane and CN.

Detailed Description

The plane of occlusion refers to an imaginary surface that theoretically touches incisal edges of the incisors and the tips of the occluding surfaces of the posterior teeth". A plane usually signifies a flat surface; however, it is not so where the occlusal plane is concerned. Two areas comprising of anterior and posterior teeth constitute the occlusal plane and must be considered individually. Anterior tooth position is governed by esthetics, phonetics and the required anterior guidance. On the contrary, functional needs predominantly determine the position of posterior teeth and this position is also affected by the incorporation of the anteroposterior and mediolateral curves. Optimal function, aesthetics and phonetics following prosthodontic rehabilitation is dependent on the establishment of physiologically accurate vertical dimensions of occlusion, palatal contours, positioning of the teeth and the level of occlusal plane.

The occlusal plane orientation is lost in patients with mutilated dentitions or those rendered edentulous and needs to be re-established for optimal function and comfort.

Different intra- and extra-oral landmarks used by clinicians to define the level of the occlusal plane include the upper lip, corners of mouth, lateral margins of tongue, Camper's plane and interpupillary line, the parotid papilla and the retromolar pad (RMP).

Any discrepancy in establishing the optimal level of occlusal plane causes adverse effects on periodontal tissues in dentate individuals and may result in vague symptoms such as headaches, migraines or stiffened shoulders and in edentulous patients, compromising the stability of the prosthesis, ultimately leading to alveolar bone resorption.

A combination of various landmark along with a judicious clinical judgment should be taken into account for the location of the occlusal plane in edentulous patients.

If the level of occlusal plane is too high, the tongue is unable to lie on the lingual cusps of the mandibular denture teeth and hence, fails to counter the movement of the denture. It may also result in food accretion in the labial and lingual sulci. In contrast, a low level of occlusal plane will promote tongue and cheek biting. Therefore, it is mandatory for the prosthodontist to re-establish the lost occlusal plane, both while dealing with multiple long span posterior restorations as well as in complete denture prosthodontics.

Material and Methods:

Forty dentulous patients. The mandibular posterior occlusal plane was determined on the level of coronoid notch (CN) on the anterior part of ramus. Then We will measure the occlusal plane in all forty a participants determined to the level of CN at the anterior border of ramus in mandible.

Inclusion :

• Stable systemic health, including absence of a history of cardiovascular disease
• No evidence of infection or trauma in oral region
• Negative history of TMJ disorders
• All subjects had natural maxillary and mandibular teeth.
• All subjects exhibited Class I skeletal and dental relationships with no prosthetic dental replacement.

Exclusion criteria:

Subjects with Claa II or Class III relationships,fractured or abraded edges of the teeth,ankyloglossia and orthodontic treatment The mandibular posterior occlusal plane was determined according to the level of coronoid notch{CN} (greatest concavity anterior border of the ramus) by measure the distance between the occlusal plane a with ages beyond the accepted age range

Conditions

Dentulous

Study Design

• Allocation Method: NA
• Intervention Model: SINGLE_GROUP
• Primary Study Purpose: TREATMENT
• Blinding Strategy: NONE

Study Groups

Locate occlusal plane

Use anatomical landmark to locate OP in dentulous subjects.

Group Type: EXPERIMENTAL

Dentulous subjects

Intervention Type: DEVICE

Determine the occlusal plane using CN in anterior border of ramus

Interventions

Dentulous subjects

Determine the occlusal plane using CN in anterior border of ramus

Intervention Type: DEVICE

Eligibility Criteria

Inclusion Criteria

• Stable systemic health, including absence of a history of cardiovascular disease
• No evidence of infection or trauma in oral region
• Negative history of TMJ disorders
• All subjects had natural maxillary and mandibular All subjects exhibited Class I skeletal and dental relationships with no prosthetic dental replacement.

Exclusion Criteria

Subjects with Claa II or Class III relationships,fractured or abraded edges of the teeth,ankyloglossia and orthodontic treatment were excluded from the study.

• Minimum Eligible Age: 21 Years
• Maximum Eligible Age: 27 Years
• Eligible Sex: ALL
• Accepts Healthy Volunteers: No

Sponsors

Hama University

OTHER

Sponsor Role: lead

Responsible Party

Responsibility Role: SPONSOR

Locations

Fadi Jnaid

Damascus, Rif-dimashq Governorate, Syria

Countries

Syria

References

Jain R, Shigli K. An in vivo study to correlate the relationship of the extraoral and intraoral anatomical landmarks with the occlusal plane in dentulous subjects. Indian J Dent Res. 2015 Mar-Apr;26(2):136-43. doi: 10.4103/0970-9290.159138.

Reference Type: BACKGROUND

PMID: 26096105 (View on PubMed)

Lundquist DO, Luther WW. Occlusal plane determination. J Prosthet Dent. 1970 May;23(5):489-98. doi: 10.1016/0022-3913(70)90198-8. No abstract available.

Reference Type: BACKGROUND

PMID: 4908801 (View on PubMed)

Kazanoglu A, Unger JW. Determining the occlusal plane with the Camper's plane indicator. J Prosthet Dent. 1992 Apr;67(4):499-501. doi: 10.1016/0022-3913(92)90080-t.

Reference Type: BACKGROUND

PMID: 1507133 (View on PubMed)

Al Quran FA, Hazza'a A, Al Nahass N. The position of the occlusal plane in natural and artificial dentitions as related to other craniofacial planes. J Prosthodont. 2010 Dec;19(8):601-5. doi: 10.1111/j.1532-849X.2010.00643.x. Epub 2010 Nov 11.

Reference Type: BACKGROUND

PMID: 21070428 (View on PubMed)

Nissan J, Barnea E, Zeltzer C, Cardash HS. Relationship between occlusal plane determinants and craniofacial structures. J Oral Rehabil. 2003 Jun;30(6):587-91. doi: 10.1046/j.1365-2842.2003.01044.x.

Reference Type: BACKGROUND

PMID: 12787455 (View on PubMed)

Tsay TP, Oyen OJ. A study of the suitability of two methods used for describing the occlusal plane. Proc Natl Sci Counc Repub China B. 1992 Jul;16(3):126-33.

Reference Type: BACKGROUND

PMID: 1296213 (View on PubMed)

Karkazis HC, Polyzois GL. A study of the occlusal plane orientation in complete denture construction. J Oral Rehabil. 1987 Jul;14(4):399-404. doi: 10.1111/j.1365-2842.1987.tb00735.x.

Reference Type: BACKGROUND

PMID: 3305842 (View on PubMed)

Raza M, Ayub N, Imran M, Nawaz K, Sami A. Occlusal Plane Evaluation In Dentate Patients For Complete Denture Prosthodontic Practice. J Ayub Med Coll Abbottabad. 2020 Jan-Mar;32(1):54-57.

Reference Type: BACKGROUND

PMID: 32468756 (View on PubMed)

Javid NS. A technique for determination of the occlusal plane. J Prosthet Dent. 1974 Mar;31(3):270-2. doi: 10.1016/0022-3913(74)90195-4. No abstract available.

Reference Type: BACKGROUND

PMID: 4521346 (View on PubMed)

Other Identifiers

HU16-7-2020RemPro

Identifier Type: -

Identifier Source: org_study_id