Study Results
The study team has not published outcome measurements, participant flow, or safety data for this trial yet. Check back later for updates.
Basic Information
Get a concise snapshot of the trial, including recruitment status, study phase, enrollment targets, and key timeline milestones.
RECRUITING
NA
50 participants
INTERVENTIONAL
2024-12-05
2027-03-31
Brief Summary
Review the sponsor-provided synopsis that highlights what the study is about and why it is being conducted.
Related Clinical Trials
Explore similar clinical trials based on study characteristics and research focus.
Innovative Multi-Variable Biofeedback for Improving Gait Performance in Individuals With Diabetic Peripheral Neuropathy
NCT06591780
Motor Learning in Gait in Subjects With Diabetic Peripheral Neuropathy
NCT00223782
PNF and Gait Training on Balance and Gait in Diabetic Neueopathy Patients
NCT05593133
Sensorimotor Training for Adults With Diabetic Peripheral Neuropathy
NCT05262946
Effect of an Exercise Program on Motor Dysfunctions Caused by Diabetic Peripheral Neuropathy
NCT07100301
Detailed Description
Dive into the extended narrative that explains the scientific background, objectives, and procedures in greater depth.
Traditional gait training programs used to improve walking function may increase ulceration risk, making these interventions unsuitable if not tailored for people with DPN. The goal of this study is to elucidate the underlying biomechanical mechanisms contributing to the inter-relationships between plantar pressure and propulsion in individuals with DPN, and to examine the safety and feasibility of using real-time biofeedback to modify plantar pressure and propulsion during gait.
The aims of this study are to evaluate (1) biomechanical mechanisms contributing to abnormal plantar pressure and propulsion during gait in individuals with DPN; (2) biofeedback-induced changes in plantar pressure, propulsion, and biomechanics during gait in individuals with DPN and age-similar controls; and (3) the acceptability, feasibility, safety, and preliminary effects of gait training in individuals with DPN. Insights into the biomechanical mechanisms underlying plantar pressure and propulsion in people with DPN will allow for the design of more informed and effective gait rehabilitation interventions aimed at preventing deleterious outcomes such as ulceration and amputation that can be tailored to individual patient characteristics.
Able-bodied participants will complete three experimental sessions and participants with DPN will complete a total of seven experimental sessions. Each session will be approximately 2-3 hours in duration.
Conditions
See the medical conditions and disease areas that this research is targeting or investigating.
Study Design
Understand how the trial is structured, including allocation methods, masking strategies, primary purpose, and other design elements.
RANDOMIZED
CROSSOVER
BASIC_SCIENCE
NONE
Study Groups
Review each arm or cohort in the study, along with the interventions and objectives associated with them.
Able-Bodied Participants
Able-bodied participants will complete a total of three study sessions. The three sessions include a clinical evaluation, gait biomechanics, and gait biofeedback for comparison with participants with DPN.
Clinical Evaluation
A clinical evaluation occurs at the first study session. The clinical evaluation assesses walking function and mobility, lower extremity, sensation, health-related quality of life (HRQoL) and foot function.
Session 2 will be a dynamometer-based evaluation of passive ankle stiffness and 3-dimensional gait analysis to evaluate baseline biomechanics. During Session 3, real-time biofeedback conditions will be used to measure the immediate effects on walking function.
Evaluation of Passive Ankle Stiffness
Participants will be seated in a dynamometer with their trunk and thigh stabilized to the dynamometer chair, ankle joint aligned with the rotational axis of the dynamometer, and foot stabilized to the foot plate. EMG activity will be recorded from lower limb muscles (gastrocnemius, soleus, tibialis anterior) during all isolated contractions. Participants will first perform three maximum voluntary isometric contractions (MVIC) while seated in a dynamometer. Participants will then perform three isokinetic dorsiflexion tasks while using electromyographic biofeedback at a prescribed level of 50% MVIC soleus activation. The slope of the linear best fit line from the ankle moment vs. angle plot will yield total ankle joint stiffness (i.e., active + passive) at a fixed activation. In three additional trials, the dynamometer will move the ankle joint through the same motion without active subject resistance and the same analytical procedures will derive passive ankle joint stiffness.
Gait Biomechanics
Three-dimensional gait analysis is performed as participants walk at a self-selected speed on an instrumented treadmill. Reflective markers are attached to lower extremity segments. Elastic bands are wrapped around the thighs, calves, and pelvis to which small, thermoplastic shells containing reflective markers are attached. Additional markers are taped to the participant's shoes and on the upper back, shoulder, hip, knee, and ankle joints with adhesive skin tape. Marker data is collected using a 7-camera motion analysis system (Vicon Inc., USA). Vicon motion analysis cameras will collect the location of the retroreflective markers in Vicon Nexus software.
Gait Biofeedback
Audio-visual biofeedback will be provided using a screen placed in front of the treadmill and a speaker. For plantar pressure biofeedback, a visual display of a foot with a colored heat map will represent the current plantar pressure, in addition to bar graphs representing real-time movement of plantar pressure in specific areas of the foot. A target will be provided using the heat map colors of red and target line on the bar graph. For propulsion biofeedback, a visual display with a marker will represent the current propulsion (peak AGRF) and a target provided to modulate propulsion. The plantar pressure and AGRF measurements from the participant's baseline walking trials will be used to determine customized biofeedback targets.
Plantar Pressure Biofeedback Gait Training Followed by Propulsion Biofeedback Gait Training
Participants with DPN will complete a total of seven study sessions. The first three sessions include a clinical evaluation, gait biomechanics, and gait biofeedback for comparison with able bodied participants. Sessions four through seven involve two different biofeedback training sessions followed by a retention gait analysis test 24-48 hours after training. Participants in this study are are randomized to receive plantar pressure biofeedback gait training first and propulsion biofeedback gait training at least three weeks later.
Clinical Evaluation
A clinical evaluation occurs at the first study session. The clinical evaluation assesses walking function and mobility, lower extremity, sensation, health-related quality of life (HRQoL) and foot function.
Session 2 will be a dynamometer-based evaluation of passive ankle stiffness and 3-dimensional gait analysis to evaluate baseline biomechanics. During Session 3, real-time biofeedback conditions will be used to measure the immediate effects on walking function.
Evaluation of Passive Ankle Stiffness
Participants will be seated in a dynamometer with their trunk and thigh stabilized to the dynamometer chair, ankle joint aligned with the rotational axis of the dynamometer, and foot stabilized to the foot plate. EMG activity will be recorded from lower limb muscles (gastrocnemius, soleus, tibialis anterior) during all isolated contractions. Participants will first perform three maximum voluntary isometric contractions (MVIC) while seated in a dynamometer. Participants will then perform three isokinetic dorsiflexion tasks while using electromyographic biofeedback at a prescribed level of 50% MVIC soleus activation. The slope of the linear best fit line from the ankle moment vs. angle plot will yield total ankle joint stiffness (i.e., active + passive) at a fixed activation. In three additional trials, the dynamometer will move the ankle joint through the same motion without active subject resistance and the same analytical procedures will derive passive ankle joint stiffness.
Gait Biomechanics
Three-dimensional gait analysis is performed as participants walk at a self-selected speed on an instrumented treadmill. Reflective markers are attached to lower extremity segments. Elastic bands are wrapped around the thighs, calves, and pelvis to which small, thermoplastic shells containing reflective markers are attached. Additional markers are taped to the participant's shoes and on the upper back, shoulder, hip, knee, and ankle joints with adhesive skin tape. Marker data is collected using a 7-camera motion analysis system (Vicon Inc., USA). Vicon motion analysis cameras will collect the location of the retroreflective markers in Vicon Nexus software.
Gait Biofeedback
Audio-visual biofeedback will be provided using a screen placed in front of the treadmill and a speaker. For plantar pressure biofeedback, a visual display of a foot with a colored heat map will represent the current plantar pressure, in addition to bar graphs representing real-time movement of plantar pressure in specific areas of the foot. A target will be provided using the heat map colors of red and target line on the bar graph. For propulsion biofeedback, a visual display with a marker will represent the current propulsion (peak AGRF) and a target provided to modulate propulsion. The plantar pressure and AGRF measurements from the participant's baseline walking trials will be used to determine customized biofeedback targets.
Plantar Pressure Biofeedback Gait Training
Participants will complete a 3-dimensional gait evaluation prior to training, after a 6-minute control bout without biofeedback, and following three 6-minute biofeedback training bouts (total 18-minutes). Individualized biofeedback targets will be calculated from each participant's immediate biofeedback session to best minimize plantar pressure whilst maintaining or enhancing propulsion. Audio-visual biofeedback is provided using a screen placed in front of the treadmill and a speaker. For plantar pressure biofeedback, a visual display of a foot with a colored heat map represents the current plantar pressure, in addition to bar graphs representing real-time movement of plantar pressure in specific areas of the foot. A target is provided using the heat map colors of red and target line on the bar graph. Participants are informed that the target is a measurement of the pressure under their foot, and their goal is to decrease pressure to achieve their target.
Propulsion Biofeedback Gait Training
Participants will complete a 3-dimensional gait evaluation prior to training, after a 6-minute control bout without biofeedback, and following three 6-minute biofeedback training bouts (total 18-minutes). Individualized biofeedback targets will be calculated from each participant's immediate biofeedback session to best minimize plantar pressure whilst maintaining or enhancing propulsion. Audio-visual biofeedback is provided using a screen placed in front of the treadmill and a speaker. For propulsion biofeedback, a visual display with a marker represents the current propulsion (peak AGRF) and a target provided to modulate propulsion. Participants are informed that the marker is a measurement of how hard they are pushing the ground backward, and their goal is to push-off more to achieve their target.
Propulsion Biofeedback Gait Training Followed by Plantar Pressure Biofeedback Gait Training
Participants with DPN will complete a total of seven study sessions. The first three sessions include a clinical evaluation, gait biomechanics, and gait biofeedback for comparison with able bodied participants. Sessions four through seven involve two different biofeedback training sessions followed by a retention gait analysis test 24-48 hours after training. Participants in this study are are randomized to receive propulsion biofeedback gait training first and plantar pressure biofeedback gait training at least three weeks later.
Clinical Evaluation
A clinical evaluation occurs at the first study session. The clinical evaluation assesses walking function and mobility, lower extremity, sensation, health-related quality of life (HRQoL) and foot function.
Session 2 will be a dynamometer-based evaluation of passive ankle stiffness and 3-dimensional gait analysis to evaluate baseline biomechanics. During Session 3, real-time biofeedback conditions will be used to measure the immediate effects on walking function.
Evaluation of Passive Ankle Stiffness
Participants will be seated in a dynamometer with their trunk and thigh stabilized to the dynamometer chair, ankle joint aligned with the rotational axis of the dynamometer, and foot stabilized to the foot plate. EMG activity will be recorded from lower limb muscles (gastrocnemius, soleus, tibialis anterior) during all isolated contractions. Participants will first perform three maximum voluntary isometric contractions (MVIC) while seated in a dynamometer. Participants will then perform three isokinetic dorsiflexion tasks while using electromyographic biofeedback at a prescribed level of 50% MVIC soleus activation. The slope of the linear best fit line from the ankle moment vs. angle plot will yield total ankle joint stiffness (i.e., active + passive) at a fixed activation. In three additional trials, the dynamometer will move the ankle joint through the same motion without active subject resistance and the same analytical procedures will derive passive ankle joint stiffness.
Gait Biomechanics
Three-dimensional gait analysis is performed as participants walk at a self-selected speed on an instrumented treadmill. Reflective markers are attached to lower extremity segments. Elastic bands are wrapped around the thighs, calves, and pelvis to which small, thermoplastic shells containing reflective markers are attached. Additional markers are taped to the participant's shoes and on the upper back, shoulder, hip, knee, and ankle joints with adhesive skin tape. Marker data is collected using a 7-camera motion analysis system (Vicon Inc., USA). Vicon motion analysis cameras will collect the location of the retroreflective markers in Vicon Nexus software.
Gait Biofeedback
Audio-visual biofeedback will be provided using a screen placed in front of the treadmill and a speaker. For plantar pressure biofeedback, a visual display of a foot with a colored heat map will represent the current plantar pressure, in addition to bar graphs representing real-time movement of plantar pressure in specific areas of the foot. A target will be provided using the heat map colors of red and target line on the bar graph. For propulsion biofeedback, a visual display with a marker will represent the current propulsion (peak AGRF) and a target provided to modulate propulsion. The plantar pressure and AGRF measurements from the participant's baseline walking trials will be used to determine customized biofeedback targets.
Plantar Pressure Biofeedback Gait Training
Participants will complete a 3-dimensional gait evaluation prior to training, after a 6-minute control bout without biofeedback, and following three 6-minute biofeedback training bouts (total 18-minutes). Individualized biofeedback targets will be calculated from each participant's immediate biofeedback session to best minimize plantar pressure whilst maintaining or enhancing propulsion. Audio-visual biofeedback is provided using a screen placed in front of the treadmill and a speaker. For plantar pressure biofeedback, a visual display of a foot with a colored heat map represents the current plantar pressure, in addition to bar graphs representing real-time movement of plantar pressure in specific areas of the foot. A target is provided using the heat map colors of red and target line on the bar graph. Participants are informed that the target is a measurement of the pressure under their foot, and their goal is to decrease pressure to achieve their target.
Propulsion Biofeedback Gait Training
Participants will complete a 3-dimensional gait evaluation prior to training, after a 6-minute control bout without biofeedback, and following three 6-minute biofeedback training bouts (total 18-minutes). Individualized biofeedback targets will be calculated from each participant's immediate biofeedback session to best minimize plantar pressure whilst maintaining or enhancing propulsion. Audio-visual biofeedback is provided using a screen placed in front of the treadmill and a speaker. For propulsion biofeedback, a visual display with a marker represents the current propulsion (peak AGRF) and a target provided to modulate propulsion. Participants are informed that the marker is a measurement of how hard they are pushing the ground backward, and their goal is to push-off more to achieve their target.
Interventions
Learn about the drugs, procedures, or behavioral strategies being tested and how they are applied within this trial.
Clinical Evaluation
A clinical evaluation occurs at the first study session. The clinical evaluation assesses walking function and mobility, lower extremity, sensation, health-related quality of life (HRQoL) and foot function.
Session 2 will be a dynamometer-based evaluation of passive ankle stiffness and 3-dimensional gait analysis to evaluate baseline biomechanics. During Session 3, real-time biofeedback conditions will be used to measure the immediate effects on walking function.
Evaluation of Passive Ankle Stiffness
Participants will be seated in a dynamometer with their trunk and thigh stabilized to the dynamometer chair, ankle joint aligned with the rotational axis of the dynamometer, and foot stabilized to the foot plate. EMG activity will be recorded from lower limb muscles (gastrocnemius, soleus, tibialis anterior) during all isolated contractions. Participants will first perform three maximum voluntary isometric contractions (MVIC) while seated in a dynamometer. Participants will then perform three isokinetic dorsiflexion tasks while using electromyographic biofeedback at a prescribed level of 50% MVIC soleus activation. The slope of the linear best fit line from the ankle moment vs. angle plot will yield total ankle joint stiffness (i.e., active + passive) at a fixed activation. In three additional trials, the dynamometer will move the ankle joint through the same motion without active subject resistance and the same analytical procedures will derive passive ankle joint stiffness.
Gait Biomechanics
Three-dimensional gait analysis is performed as participants walk at a self-selected speed on an instrumented treadmill. Reflective markers are attached to lower extremity segments. Elastic bands are wrapped around the thighs, calves, and pelvis to which small, thermoplastic shells containing reflective markers are attached. Additional markers are taped to the participant's shoes and on the upper back, shoulder, hip, knee, and ankle joints with adhesive skin tape. Marker data is collected using a 7-camera motion analysis system (Vicon Inc., USA). Vicon motion analysis cameras will collect the location of the retroreflective markers in Vicon Nexus software.
Gait Biofeedback
Audio-visual biofeedback will be provided using a screen placed in front of the treadmill and a speaker. For plantar pressure biofeedback, a visual display of a foot with a colored heat map will represent the current plantar pressure, in addition to bar graphs representing real-time movement of plantar pressure in specific areas of the foot. A target will be provided using the heat map colors of red and target line on the bar graph. For propulsion biofeedback, a visual display with a marker will represent the current propulsion (peak AGRF) and a target provided to modulate propulsion. The plantar pressure and AGRF measurements from the participant's baseline walking trials will be used to determine customized biofeedback targets.
Plantar Pressure Biofeedback Gait Training
Participants will complete a 3-dimensional gait evaluation prior to training, after a 6-minute control bout without biofeedback, and following three 6-minute biofeedback training bouts (total 18-minutes). Individualized biofeedback targets will be calculated from each participant's immediate biofeedback session to best minimize plantar pressure whilst maintaining or enhancing propulsion. Audio-visual biofeedback is provided using a screen placed in front of the treadmill and a speaker. For plantar pressure biofeedback, a visual display of a foot with a colored heat map represents the current plantar pressure, in addition to bar graphs representing real-time movement of plantar pressure in specific areas of the foot. A target is provided using the heat map colors of red and target line on the bar graph. Participants are informed that the target is a measurement of the pressure under their foot, and their goal is to decrease pressure to achieve their target.
Propulsion Biofeedback Gait Training
Participants will complete a 3-dimensional gait evaluation prior to training, after a 6-minute control bout without biofeedback, and following three 6-minute biofeedback training bouts (total 18-minutes). Individualized biofeedback targets will be calculated from each participant's immediate biofeedback session to best minimize plantar pressure whilst maintaining or enhancing propulsion. Audio-visual biofeedback is provided using a screen placed in front of the treadmill and a speaker. For propulsion biofeedback, a visual display with a marker represents the current propulsion (peak AGRF) and a target provided to modulate propulsion. Participants are informed that the marker is a measurement of how hard they are pushing the ground backward, and their goal is to push-off more to achieve their target.
Eligibility Criteria
Check the participation requirements, including inclusion and exclusion rules, age limits, and whether healthy volunteers are accepted.
Inclusion Criteria
2. Able to walk 10-meters independently without an assistive device
3. Sufficient cardiovascular and musculoskeletal health to walk on a treadmill for 1-minute at self-selected speed
1. Diagnosis of DM
2. Diagnosis of DPN by a physician
3. Foot examination within the past 6 months to document ambulatory status
4. Physician's clearance
Exclusion Criteria
2. History of orthopaedic disease affecting the lower extremities
3. History of injury or pain affecting the lower extremity or walking function within the past 6 months
1. History of amputation
2. Active ulceration
3. Medial column deformity
4. History of Charcot osteoarthropathy
5. History of posterior muscle group lengthening
6. History of lower extremity joint replacement
7. History of lower extremity and/or foot surgery affecting walking mechanics
8. Orthopaedic problems of the lower limbs or spine due to other medical conditions (not DM or DPN) that limit walking or cause pain during walking
9. Improper footwear for walking and community ambulation
10. Cardiovascular or medical condition affecting ability to walk safely
11. History of unexplained dizziness or fainting in the past 2 months
12. Allergy to adhesive tape or rubbing alcohol
13. Individuals who are pregnant, prisoners, or not yet adults
14. Inability to communicate with the investigators
15. Inability to provide written informed consent
45 Years
ALL
Yes
Sponsors
Meet the organizations funding or collaborating on the study and learn about their roles.
Eunice Kennedy Shriver National Institute of Child Health and Human Development (NICHD)
NIH
Florida Institute for Human and Machine Cognition
OTHER
Responsible Party
Identify the individual or organization who holds primary responsibility for the study information submitted to regulators.
Nicole Rendos
Research Scientist
Principal Investigators
Learn about the lead researchers overseeing the trial and their institutional affiliations.
Nicole Rendos, PhD
Role: PRINCIPAL_INVESTIGATOR
Research Scientist
Locations
Explore where the study is taking place and check the recruitment status at each participating site.
Florida Institute for Human and Machine Cognition
Pensacola, Florida, United States
Countries
Review the countries where the study has at least one active or historical site.
Central Contacts
Reach out to these primary contacts for questions about participation or study logistics.
Facility Contacts
Find local site contact details for specific facilities participating in the trial.
Other Identifiers
Review additional registry numbers or institutional identifiers associated with this trial.
IRB-2025-0002
Identifier Type: -
Identifier Source: org_study_id
More Related Trials
Additional clinical trials that may be relevant based on similarity analysis.