the Condylar Response of Mini-plate Anchored Rigid Fixed Functional Appliance Versus Dentally Anchored Semi-rigid One

Study Results

Results pending

The study team has not published outcome measurements, participant flow, or safety data for this trial yet. Check back later for updates.

Basic Information

Get a concise snapshot of the trial, including recruitment status, study phase, enrollment targets, and key timeline milestones.

Recruitment Status

COMPLETED

Clinical Phase

PHASE2/PHASE3

Total Enrollment

20 participants

Study Classification

INTERVENTIONAL

Study Start Date

2020-06-15

Study Completion Date

2022-04-15

Brief Summary

Review the sponsor-provided synopsis that highlights what the study is about and why it is being conducted.

This study will be directed to evaluate The effect of two different types of fixed functional appliances on the temporomandibular joint.

Study design:

Prospective randomized clinical study.

Study setting and population:

This study will be conducted on twenty orthodontic patients. The number of patients was dependent on a power study.

Sample size calculation was based on the observed average effect size derived from previous article addressing "the effect of skeletally anchored Forsus FRD using miniplates for the treatment of Class II malocclusion

Related Clinical Trials

Explore similar clinical trials based on study characteristics and research focus.

the Mini-plate Anchored Herbst Appliance Versus the Dentally Anchored Fixed Functional Appliance

NCT05440526

Class II Malocclusion

COMPLETED PHASE2/PHASE3

Skeletally Versus Dentally Anchored Herbst Appliance

NCT04402164

Angle Class II, Division 1

COMPLETED NA

Treatment of Class III Malocclusion Using Modified Fixed Mandibular Retractor Appliance

NCT03354442

Malocclusion, Angle Class III

COMPLETED NA

The Effect of Functional Treatment of Patients With Backward Positioned Chins on the Jaw Joint and Movements

NCT03645343

Malocclusion, Angle Class II Retrognathism TMJ

COMPLETED NA

Evaluating the Effectiveness of the Lower-Clear-Plate-Based Intermaxillary Traction

NCT06596239

Class III Malocclusion

COMPLETED NA

Detailed Description

Dive into the extended narrative that explains the scientific background, objectives, and procedures in greater depth.

Participants will be selected based on the following inclusion criteria:

1. Skeletal class 2 malocclusion due to mandibular retrusion with increased overjet (SNA= 82±4, ANB=≥4°).
2. Mandibular arch with minimum (up to 4mm) or no crowding.
3. All permanent teeth are erupted (3rd molar not included).
4. Good oral and general health.
5. No systemic disease or regular medication that could interfere and/or affect orthodontic teeth movement.
6. No previous orthodontic treatment.

outcomes measures:

1. primary outcome: comparison of condylar volume of Herbst group versus TFBC group.
2. secondary outcome: Measurement of of condylar volume within each group (Herbst group and TFBC group)

Treatment steps:

As for Group Ι:

1. Two mini plates are chosen, the last hole in every plate is used to solder the ball housing of type IV Herbst appliance.
2. The two mini plates are placed bilateral at the mandibular symphysis and fixed by at least 3 screws, the surgical wound is sutured leaving an extended part of the plate in the oral cavity which contain the soldered ball housing.
3. The surgical wound is left for 2 weeks for proper soft tissue healing, in the meantime separation in the arch, band placement on the first premolar and molar bilateral followed by impression for construction of the upper Herbst splint.
4. Cementation of upper Herbst splint with connecting the telescopic piston through fitting of the plunger into the tube bilaterally.
5. When reactivation of the telescopic piston is needed, extension rings are used.

As for Group ΙΙ:

1. The patients will be treated by fixed orthodontic appliance with using series of orthodontic NiTi arch wires for levelling and alignment.
2. Installation of series of orthodontic stainless steel arch wires until 0.0019 x 0.0025 inch for both arches.
3. Installation of the Twin Force Bite Corrector appliance for 4 to 6 months.
4. Using of class ΙΙ intra-oral elastics for both sides for 2 to 3 months.
5. Finally follow finishing steps for each patient.

Observations:

Changes in the condylar volume and changes in position of the condyle in relation to glenoid fossa as a result of remodeling process before and after the fixed functional orthopedic treatment at each group.

Conditions

See the medical conditions and disease areas that this research is targeting or investigating.

Class II Malocclusion

Study Design

Understand how the trial is structured, including allocation methods, masking strategies, primary purpose, and other design elements.

Allocation Method

RANDOMIZED

Intervention Model

PARALLEL

Participants will be selected based on the following inclusion criteria:

1. Skeletal class 2 malocclusion due to mandibular retrusion with increased overjet (SNA= 82±4, ANB=≥4°). With agefrom 18 to 25 years.
2. Mandibular arch with minimum (up to 4mm) or no crowding.
3. All permanent teeth are erupted (3rd molar not included).
4. Good oral and general health.
5. No systemic disease or regular medication that could interfere and/or affect orthodontic teeth movement.
6. No previous orthodontic treatment.

Primary Study Purpose

TREATMENT

Blinding Strategy

TRIPLE

Participants Investigators Outcome Assessors

Study Groups

Review each arm or cohort in the study, along with the interventions and objectives associated with them.

Herbst Group

Include ten young adult orthodontic patients who are treated by using fixed orthodontic appliances followed by the type IV Herbst appliance (mini plate anchored appliance). The age of patients will be (18-20y).

Group Type ACTIVE_COMPARATOR

Herbst Group

Intervention Type DEVICE

1. Two mini plates are chosen, the last hole in every plate is used to solder the ball housing of type IV Herbst appliance.
2. The two mini plates are placed bilateral at the mandibular symphysis and fixed by at least 3 screws, the surgical wound is sutured leaving an extended part of the plate in the oral cavity which contain the soldered ball housing.
3. The surgical wound is left for 2 weeks for proper soft tissue healing, in the meantime separation in the arch, band placement on the first premolar and molar bilateral followed by impression for construction of the upper Herbst splint.
4. Cementation of upper Herbst splint with connecting the telescopic piston through fitting of the plunger into the tube bilaterally.
5. When reactivation of the telescopic piston is needed, extension rings are used.

TFBC Group

Include ten young adult orthodontic patients who are treated by using fixed orthodontic appliances followed by the Twin Force Bite Corrector appliance (dentally anchored appliance). The age of patients will be (18-20y).

Group Type ACTIVE_COMPARATOR

TFBC Group

Intervention Type DEVICE

1. The patients will be treated by fixed orthodontic appliance with using series of orthodontic NiTi arch wires for levelling and alignment.
2. Installation of series of orthodontic stainless steel arch wires until 0.0019 x 0.0025 inch for both arches.
3. Installation of the Twin Force Bite Corrector appliance for 4 to 6 months.
4. Using of class ΙΙ intra-oral elastics for both sides for 2 to 3 months.
5. Finally follow finishing steps for each patient.

Interventions

Learn about the drugs, procedures, or behavioral strategies being tested and how they are applied within this trial.

Herbst Group

1. Two mini plates are chosen, the last hole in every plate is used to solder the ball housing of type IV Herbst appliance.
2. The two mini plates are placed bilateral at the mandibular symphysis and fixed by at least 3 screws, the surgical wound is sutured leaving an extended part of the plate in the oral cavity which contain the soldered ball housing.
3. The surgical wound is left for 2 weeks for proper soft tissue healing, in the meantime separation in the arch, band placement on the first premolar and molar bilateral followed by impression for construction of the upper Herbst splint.
4. Cementation of upper Herbst splint with connecting the telescopic piston through fitting of the plunger into the tube bilaterally.
5. When reactivation of the telescopic piston is needed, extension rings are used.

Intervention Type DEVICE

TFBC Group

1. The patients will be treated by fixed orthodontic appliance with using series of orthodontic NiTi arch wires for levelling and alignment.
2. Installation of series of orthodontic stainless steel arch wires until 0.0019 x 0.0025 inch for both arches.
3. Installation of the Twin Force Bite Corrector appliance for 4 to 6 months.
4. Using of class ΙΙ intra-oral elastics for both sides for 2 to 3 months.
5. Finally follow finishing steps for each patient.

Intervention Type DEVICE

Other Intervention Names

Discover alternative or legacy names that may be used to describe the listed interventions across different sources.

Group I Group II

Eligibility Criteria

Check the participation requirements, including inclusion and exclusion rules, age limits, and whether healthy volunteers are accepted.

Inclusion Criteria

1. Skeletal class 2 malocclusion due to mandibular retrusion with increased overjet (SNA= 82±4, ANB=≥4°). With agefrom 18 to 25 years.
2. Mandibular arch with minimum (up to 4mm) or no crowding.
3. All permanent teeth are erupted (3rd molar not included).
4. Good oral and general health.
5. No systemic disease or regular medication that could interfere and/or affect orthodontic teeth movement.
6. No previous orthodontic treatment.

Exclusion Criteria

\- 1. Patients with a blocked-out tooth that will not allow for placement of the bracket at the initial bonding appointment.

2\. Patients with untreated decay or any endodontic lesions.

Minimum Eligible Age

18 Years

Maximum Eligible Age

20 Years

Eligible Sex

ALL

Accepts Healthy Volunteers

Yes