The Bioequivalence Study of Two Different Formulations of Olmesartan Medoxomil After a Single Oral Dose Administration Under Fasting Conditions.
NCT ID: NCT03951051
Last Updated: 2019-07-29
Study Results
The study team has not published outcome measurements, participant flow, or safety data for this trial yet. Check back later for updates.
Basic Information
Get a concise snapshot of the trial, including recruitment status, study phase, enrollment targets, and key timeline milestones.
COMPLETED
PHASE1
32 participants
INTERVENTIONAL
2019-05-06
2019-06-16
Brief Summary
Review the sponsor-provided synopsis that highlights what the study is about and why it is being conducted.
Related Clinical Trials
Explore similar clinical trials based on study characteristics and research focus.
A Bioequivalence Study of Two Different Formulations of Olmesartan Medoxomil/ Hydrochlorothiazide After a Single Oral Dose Administration Under Fasting Conditions
NCT04138888
Bioequivalence Study of Torrent Pharmaceuticals Ltd.'s Olmesartan Medoxomil Tablet Under Fasting Conditions
NCT03318354
Bioequivalence Study of Torrent Pharmaceuticals Ltd.'s Olmesartan Medoxomil Tablets Under Fed Conditions
NCT03319706
Fasting Study of Olmesartan Medoxomil Tablets 40 mg and Benicar® Tablets 40 mg
NCT00649623
Fed Study of Olmesartan Medoxomil Tablets 40 mg and Benicar® Tablets 40 mg
NCT00648219
Detailed Description
Dive into the extended narrative that explains the scientific background, objectives, and procedures in greater depth.
The objective of this study is to determine the bioequivalence of two different formulations of olmesartan after a single oral dose administration under fasting conditions.
The intra-subject variation following a single dose of olmesartan appears to be around 25% for Cmax and around 18% for AUC0-t. Statistically, given that the expected Test to Reference ratio of geometric least-squares means (LSmeans) should fall within 95 and 105%, it is estimated that the lowest number of subjects to meet the 80 to 125% bioequivalence range with a statistical a priori power of at least 80% is about 28. Therefore, the inclusion of 32 subjects should be sufficient to account for the possibility of drop-outs, variations around the estimated intra-subject coefficient of variation (CV) and to conclude in favor of the hypothesis of bioequivalence with sufficient statistical power.
Subject eligibility for this study will be determined at the screening visit and eligible subjects will be admitted to the clinical research unit at least 10 hours prior to drug administration for each study period.
A subject who withdraws or is withdrawn during the pretrial evaluations but before receiving the first dose (the test or the reference product) in Period 1 will not be considered as a drop-out and will not be included in the final database. Standbys should be recruited and available to replace any subject who withdraws prior to the first drug administration. On-study drop-outs will not be replaced.
Altasciences will generate the randomization code with a computer program according to the study design, the number of subjects and the sequence of treatment administration. The random allocation of each sequence of treatment administration to each subject will be done in such a way that the study is balanced. Once generated, the randomization code will be final and will not be modified. Eligible subjects will be randomized to one of two treatment sequences. There will be two sequences in the study: AB and BA, where A = the test product, B = the reference product (see detailed description of A and B items in Section "Arms and Interventions").
For each study period, subjects will receive a single 40 mg oral dose of olmesartan medoxomil (the test or the reference formulation). Study participants will be aware they will receive different formulations of the same drug, without being informed which product (Test or Reference) is being administered.The date and time of each dose will be recorded. For each subject, all scheduled postdose activities and assessments will be performed relative to the time of study drug administration.
Fasting will continue for at least 4 hours following drug administration, after which a standardized lunch will be served. A supper and a light snack will be served at appropriate times thereafter, but not before 9 hours after dosing. Water will be provided as needed until 1 hour predose. Water will be allowed beginning 1 hour after the administration of the drug.
A total of 21 blood samples will be collected (one tube of 3 mL each) in each study period for pharmacokinetic (PK) assessments.The first blood sample will be collected prior to drug administration while the others will be collected up to 48 hours after drug administration.
Given that the parent compound, olmesartan medoxomil, is rapidly and completely converted to the pharmacologically active metabolite, olmesartan, and that no intact olmesartan medoxomil or intact side chain medoxomil moiety have been detected in plasma, olmesartan medoxomil cannot be reliably measured. Therefore, the analyte to be measured in the present study will be olmesartan. Olmesartan plasma concentrations will be measured according to a validated bioanalytical method.
Subjects are to be discharged from the clinic after the 24-hour postdose PK sample collection, and following medical approval. However, they may be advised to stay at the clinical site for safety reasons, if judged necessary by the physician in charge. Subjects will return to the clinic for blood collections at 36 and 48 hours postdose.
The expected terminal elimination half-life observed after a single oral 40 mg dose of olmesartan medoxomil tablets under fasting conditions is 9.4 hours. To avoid any carry-over effect, a wash-out of 7 calendar days is planned between drug administrations.
The decision of which subjects will be included in the PK analysis is to be documented by the pharmacokineticist (or delegate) and approved by the sponsor before the start of the sampleanalysis by the bioanalytical facility. Subjects who are expected to provide evaluable PK data for both the Test and Reference products (based on viable PK samples) will be included in the PK analysis. Concentration data of the remaining subjects will be presented separately. Subjects who do not complete the sampling schedule of one or more study periods may be included in the PK and statistical analysis and bioequivalence determination for only the PK parameters that are judged not to be affected by the missing sample(s).
Statistical analysis of Tmax will be based on a non-parametric approach. Statistical analysis of all other PK parameters will be based on an Analysis of Variance (ANOVA) model. Two-sided 90% confidence interval of the ratio of geometric LSmeans obtained from the ln-transformed PK parameters will be calculated.
Statistical inference of olmesartan will be based on a bioequivalence approach using the following standards: the ratio of geometric LSmeans with corresponding 90% confidence interval calculated from the exponential of the difference between the Test and the Reference for the ln-transformed parameters Cmax and AUC0-t should all be within the 80.00 to 125.00% bioequivalence range.
The safety population will include all subjects who received at least one formulation (Test or Reference). Safety assessments will include vital signs, clinical laboratory tests and AE monitoring. Additional safety measurements may be performed at the discretion of the investigator for reasons related to subject safety.The physician in charge will be present at the clinical site for at least the first 4 hours following each drug administration and will remain available at all times throughout the study.
Total study duration: up to 32 days (including screening).
Conditions
See the medical conditions and disease areas that this research is targeting or investigating.
Study Design
Understand how the trial is structured, including allocation methods, masking strategies, primary purpose, and other design elements.
RANDOMIZED
CROSSOVER
OTHER
SINGLE
Study Groups
Review each arm or cohort in the study, along with the interventions and objectives associated with them.
Sequence AB
16 subjects assigned to the sequence AB will receive a single 40 mg dose of the test product Olmesartan Medoxomil (1 x 40 mg film-coated tablet), marked as A in the sequence, in Period 1 and a single 40 mg dose of the reference product Olmetec® (1 x 40 mg film-coated tablet), marked as B in the sequence, in period 2. These treatments will be administered orally with approximately 240 mL of water at ambient temperature, in the morning, following a minimum of 10-hour overnight fast. The tablet must be swallowed whole and must not be chewed or broken.
Olmesartan Medoxomil 40 mg
Olmesartan Medoxomil is manufactured by Pharmtechnology LLC, Republic of Belarus. Each film-coated tablet contains 40 mg of olmesartan medoxomil.
Olmetec®
Olmetec® is manufactured by Daiichi Sankyo Europe GmbH, Germany. Each film-coated tablet contains 40 mg of olmesartan medoxomil.
Sequence BA
16 subjects assigned to the sequence BA will receive a single 40 mg dose of the reference product Olmetec® (1 x 40 mg film-coated tablet), marked as B in the sequence, in Period 1 and a single 40 mg dose of the test product Olmesartan Medoxomil (1 x 40 mg film-coated tablet), marked as A in the sequence, in period 2. These treatments will be administered orally with approximately 240 mL of water at ambient temperature, in the morning, following a minimum of 10-hour overnight fast. The tablet must be swallowed whole and must not be chewed or broken.
Olmesartan Medoxomil 40 mg
Olmesartan Medoxomil is manufactured by Pharmtechnology LLC, Republic of Belarus. Each film-coated tablet contains 40 mg of olmesartan medoxomil.
Olmetec®
Olmetec® is manufactured by Daiichi Sankyo Europe GmbH, Germany. Each film-coated tablet contains 40 mg of olmesartan medoxomil.
Interventions
Learn about the drugs, procedures, or behavioral strategies being tested and how they are applied within this trial.
Olmesartan Medoxomil 40 mg
Olmesartan Medoxomil is manufactured by Pharmtechnology LLC, Republic of Belarus. Each film-coated tablet contains 40 mg of olmesartan medoxomil.
Olmetec®
Olmetec® is manufactured by Daiichi Sankyo Europe GmbH, Germany. Each film-coated tablet contains 40 mg of olmesartan medoxomil.
Other Intervention Names
Discover alternative or legacy names that may be used to describe the listed interventions across different sources.
Eligibility Criteria
Check the participation requirements, including inclusion and exclusion rules, age limits, and whether healthy volunteers are accepted.
Inclusion Criteria
1. Physiological postmenopausal status, defined as the following:
1. absence of menses for at least one year prior to the first study drug administration (without an alternative medical condition); and
2. Follicle stimulating hormone (FSH) levels ≥ 40 mIU/mL at screening;
or
2. Surgical postmenopausal status, defined as the following:
1. bilateral oophorectomy; and
2. absence of menses for at least 90 days prior to the first study drug administration; and
3. FSH levels ≥ 40 mIU/mL at screening;
or
5\. Volunteer aged at least 18 years but not older than 55 years 6. Volunteer with a body mass index (BMI) within 18.5 kg/m2 to 30.0 kg/m2, inclusively 7. Light-, non- or ex-smoker. A light smoker is defined as someone using 10.0 nicotine units or less per day for at least 90 days prior to the first study drug administration. An ex-smoker is defined as someone who completely stopped using nicotine products for at least 180 days prior to the first study drug administration 8. Clinical laboratory values within the laboratory's stated normal range; if not within this range, they must be without clinical significance, as determined by an investigator 9. Have no clinically significant diseases captured in the medical history or evidence of clinically significant findings on the physical examination (including vital signs) and/or ECG, as determined by an investigator
Exclusion Criteria
2. Females who are pregnant according to the pregnancy test at screening
3. Seated pulse rate less than 50 Beats per Minute (bpm) or more than 100 bpm at the screening visit or prior to the first study drug administration
4. Seated blood pressure below 110/60 mmHg at the screening visit or prior to the first study drug administration
5. History of significant hypersensitivity to olmesartan or any related products (including excipients of the formulations) as well as severe hypersensitivity reactions (like angioedema) to any drugs
6. Presence of significant gastrointestinal, liver or kidney disease, or any other condition known to interfere with drug absorption, distribution, metabolism or excretion, or known to potentiate or predispose to undesired effects
7. History of significant gastrointestinal, liver or kidney disease, or surgery that may affect drug bioavailability, including but not limited to cholecystectomy
8. History of significant cardiovascular, pulmonary, hematologic, neurological, psychiatric, endocrine, immunologic or dermatologic disease
9. Presence of clinically significant ECG abnormalities at the screening visit, as defined by medical judgment
10. History of rare hereditary problems of galactose and/or lactose intolerance, lactase deficiency or glucose-galactose malabsorption
11. Maintenance therapy with any drug or significant history of drug dependency or alcohol abuse (\> 3 units of alcohol per day, intake of excessive alcohol, acute or chronic)
12. Any clinically significant illness in the 28 days prior to the first study drug administration
13. Use of any prescription drugs (with the exception of hormone replacement therapy) in the 28 days prior to the first study drug administration, that in the opinion of an investigator would put into question the status of the volunteer as healthy
14. Any history of tuberculosis
15. Positive test result for alcohol and/or drugs of abuse at screening or prior to the first drug administration
16. Positive screening results to HIV Ag/Ab Combo, Hepatitis B surface Antigen or Hepatitis C Virus tests
17. Volunteers who have already been included in a previous group for this clinical study
18. Volunteers who took olmesartan in the 28 days prior to the first study drug administration
19. Volunteers who took an Investigational Product (IP) in the 28 days prior to the first study drug administration
20. Volunteers who donated 50 mL or more of blood in the 28 days prior to the first study drug administration
21. Donation of 500 mL or more of blood (Canadian Blood Services, Hema-Quebec, clinical studies, etc.) in the 56 days prior to the first study drug administration
18 Years
55 Years
ALL
Yes
Sponsors
Meet the organizations funding or collaborating on the study and learn about their roles.
Altasciences Company Inc.
INDUSTRY
Pharmtechnology LLC
INDUSTRY
Responsible Party
Identify the individual or organization who holds primary responsibility for the study information submitted to regulators.
Principal Investigators
Learn about the lead researchers overseeing the trial and their institutional affiliations.
Eric Sicard, MD
Role: PRINCIPAL_INVESTIGATOR
Altasciences Company Inc.
Locations
Explore where the study is taking place and check the recruitment status at each participating site.
Altasciences Company Inc.
Mount Royal, Quebec, Canada
Countries
Review the countries where the study has at least one active or historical site.
Other Identifiers
Review additional registry numbers or institutional identifiers associated with this trial.
PTL-P1-627 (v. 2.0 05/14/2019)
Identifier Type: -
Identifier Source: org_study_id
More Related Trials
Additional clinical trials that may be relevant based on similarity analysis.