Study to Compare Two Functional Appliances for Class II Malocclusions
NCT ID: NCT03773783
Last Updated: 2018-12-12
Study Results
The study team has not published outcome measurements, participant flow, or safety data for this trial yet. Check back later for updates.
Basic Information
Get a concise snapshot of the trial, including recruitment status, study phase, enrollment targets, and key timeline milestones.
UNKNOWN
NA
64 participants
INTERVENTIONAL
2017-07-10
2020-07-31
Brief Summary
Review the sponsor-provided synopsis that highlights what the study is about and why it is being conducted.
Null hypothesis:
There is no significant difference between the Button \& bead and Twin-block appliances with regard to time taken to reduce the overjet
Detailed Description
Dive into the extended narrative that explains the scientific background, objectives, and procedures in greater depth.
A functional appliance is a type of brace used to help correct a 'Class II' malocclusion. Class II malocclusions are where upper front teeth bite significantly further forward in relation to lower front teeth. A functional appliance is defined as a brace that engages upper and lower teeth and works mainly by posturing the lower jaw away from its normal position1. The functional appliance may either be removable or fixed in nature and of various designs.
Correction of a class II malocclusion can be commenced early i.e. before the age of 10 or during early adolescence when the patient is in a late mixed dentition / early permanent dentition. If correction is commenced early, this results in the need for a two phase treatment which involves functional appliance treatment in the first phase (age 7-10) followed by fixed appliances (+/- functional appliances) as an adolescent (age 11-16). If correction is started in early adolescence only one phase of treatment is required which involves a combination of functional and fixed appliances (age 11-16).
Early or delayed class II treatment has been studied by various researchers2-10. O'Brien et al7 concluded that there was no advantage of early treatment with Twin Block as compared to treatment started in adolescents. In fact, they reported significantly poorer occlusal outcomes as determined by the objective Peer Assessment Rating (PAR) index in those that had early treatment. In addition, they found that total duration of treatment, total attendances and total cost of treatment was significantly higher in the early treatment group. The average total duration of treatment for those that had early treatment was 968 days (phase 1 = 527 days and phase 2 = 435 days) compared to 744 days for those that had treatment as an adolescent only.
The most commonly used brace to correct class II malocclusions in the UK is a functional appliance (Twin Block design) 11.
The Button and Bead functional appliance has been developed and used successfully by Mr Spary (Consultant Orthodontist) for several years. However, there are no studies to date that have studied its effectiveness in correcting a class II problem. The Button and bead appliance appears to be quicker at reducing the overjet and preferred by patients as there is less mouth opening making the appliance more comfortable to wear. It is also two clear aligners, which are more aesthetic than the traditional twin block appliance. The button and bead appliance does not however allow arch expansion. This may necessitate another appliance prior to fixed appliance treatment or prolong fixed appliance treatment if expansion also needs to be carried out in that phase.
Objectives:
1. Primary objective:
a. To compare the Button-\&-bead and Twin-block appliances treatment duration for overjet reduction
2. Secondary objectives:
1. To compare the Button-\&-bead and Twin-block appliances dento-occlusal outcomes as measured by the Peer Assessment Rating (PAR)
2. To compare patient compliance with the Button-\&-bead and Twin-block appliances and identify causes for failure
3. To compare the health economics of the Button-\&-bead and Twin-block appliances (Cost of appliances, number of visits, number and cost of repairs and/or replacements)
4. To compare the skeletal changes of the Button-\&-bead and Twin-block appliances based on the Eastman analysis
5. To compare changes in soft tissue profile as assessed by 3D photographs
6. To assess changes in OHRQoL after overjet reduction with the Button-\&-bead and Twin-block appliances
7. To evaluate and compare patient satisfaction with the Button-\&-bead and Twin-block appliances
3. Safety objective
1. To evaluate the safety of the Button-\&-Bead appliance relative to the Twin-Block appliance in terms of the occurrence of any device-related adverse- and side-effects (soft-tissue trauma, decalcification, dental caries, ingestion or aspiration of appliance).
Conditions
See the medical conditions and disease areas that this research is targeting or investigating.
Keywords
Explore important study keywords that can help with search, categorization, and topic discovery.
Study Design
Understand how the trial is structured, including allocation methods, masking strategies, primary purpose, and other design elements.
RANDOMIZED
PARALLEL
TREATMENT
DOUBLE
Study Groups
Review each arm or cohort in the study, along with the interventions and objectives associated with them.
Twin Block
Twin Block appliance
Twin Block appliance
Twin Block appliance
Button and Bead
Button and Bead appliance
Button and Bead appliance
Button and Bead appliance
Interventions
Learn about the drugs, procedures, or behavioral strategies being tested and how they are applied within this trial.
Button and Bead appliance
Button and Bead appliance
Twin Block appliance
Twin Block appliance
Eligibility Criteria
Check the participation requirements, including inclusion and exclusion rules, age limits, and whether healthy volunteers are accepted.
Inclusion Criteria
* The normal overjet for a Caucasian population is in the range of 2-4mm. A functional appliance is used to allow for overjet reduction without extractions and/or to reduce the anchorage demands of the subsequent treatment with the Straight Wire Appliance (SWA). Clinically the overjet would need to be significantly increased for the treating clinician to consider the use of a functional appliance. Other similar studies have used an overjet of \>6mm or ≥ 7mm. This study has elected for an initial overjet of ≥ 7mm to improve the studies external validity by making it more applicable to day-to-day clinical practice.
* The initial overjet will be used to select patients. The majority of recent high level trials and systematic reviews that have provided a significant amount of the evidence base in the treatment of Class II malocclusions have defined subjects according to their initial overjet.
\* Age 10 to 14 years
* This has been selected to match other studies relating to functional appliance treatment and reflect the most common clinical practice. The literature on functional appliance treatment has provided evidence that on average the enhancement of growth is small. Some studies on the timing of functional appliance treatment have suggested that pubertal growth is not a significant factor in the success of functional appliance treatment but it is well know and accepted that functional appliance treatment is assisted during periods of more rapid growth. Numerous studies have also found better co-operation and completion of treatment in younger patients (Banks 2004, KOB 2003a \& 2003b)
\* Satisfactory Dental health
* Patients must be dentally healthy and have a suitable level of oral health that would support orthodontic treatment, as per the British Orthodontic Society guidelines. They must have good oral hygiene with minimal gingivitis or periodontal disease, no dental caries or periapical pathology and no history of dento-alveolar trauma. This is judged by the investigator.
* Willing to participate in study and provide informed consent
Exclusion Criteria
* This is aimed at reducing any confounding factors within the study as these may affect the success of treatment.
\* No craniofacial syndrome (including Cleft patients)
* This is aimed at reducing any confounding factors within the study as these conditions may affect the success of treatment. The treatment of this subgroup requires a multi-disciplinary team and is more complex. Their treatment pathway may vary from normal clinical practice.
10 Years
14 Years
ALL
Yes
Sponsors
Meet the organizations funding or collaborating on the study and learn about their roles.
University of Birmingham
OTHER
Responsible Party
Identify the individual or organization who holds primary responsibility for the study information submitted to regulators.
Principal Investigators
Learn about the lead researchers overseeing the trial and their institutional affiliations.
Thomas Dietrich
Role: PRINCIPAL_INVESTIGATOR
University of Birmingham
Locations
Explore where the study is taking place and check the recruitment status at each participating site.
Birmingham dental hospital
Birmingham, , United Kingdom
Countries
Review the countries where the study has at least one active or historical site.
Central Contacts
Reach out to these primary contacts for questions about participation or study logistics.
Facility Contacts
Find local site contact details for specific facilities participating in the trial.
Sheena Kotecha
Role: primary
References
Explore related publications, articles, or registry entries linked to this study.
Isaacson KG, Reed RT, Stephens CD. Functional orthodontic appliances. Oxford: Blackwell Scientific Publications; 1990.
Tulloch JF, Phillips C, Proffit WR. Benefit of early Class II treatment: progress report of a two-phase randomized clinical trial. Am J Orthod Dentofacial Orthop. 1998 Jan;113(1):62-72, quiz 73-4. doi: 10.1016/S0889-5406(98)70277-X.
Keeling SD, Wheeler TT, King GJ, Garvan CW, Cohen DA, Cabassa S, McGorray SP, Taylor MG. Anteroposterior skeletal and dental changes after early Class II treatment with bionators and headgear. Am J Orthod Dentofacial Orthop. 1998 Jan;113(1):40-50. doi: 10.1016/S0889-5406(98)70275-6.
Ghafari J, Shofer FS, Jacobsson-Hunt U, Markowitz DL, Laster LL. Headgear versus function regulator in the early treatment of Class II, division 1 malocclusion: a randomized clinical trial. Am J Orthod Dentofacial Orthop. 1998 Jan;113(1):51-61. doi: 10.1016/s0889-5406(98)70276-8.
O'Brien K, Wright J, Conboy F, Sanjie Y, Mandall N, Chadwick S, Connolly I, Cook P, Birnie D, Hammond M, Harradine N, Lewis D, McDade C, Mitchell L, Murray A, O'Neill J, Read M, Robinson S, Roberts-Harry D, Sandler J, Shaw I. Effectiveness of treatment for Class II malocclusion with the Herbst or twin-block appliances: a randomized, controlled trial. Am J Orthod Dentofacial Orthop. 2003 Aug;124(2):128-37. doi: 10.1016/s0889-5406(03)00345-7.
O'Brien K, Wright J, Conboy F, Sanjie Y, Mandall N, Chadwick S, Connolly I, Cook P, Birnie D, Hammond M, Harradine N, Lewis D, McDade C, Mitchell L, Murray A, O'Neill J, Read M, Robinson S, Roberts-Harry D, Sandler J, Shaw I. Effectiveness of early orthodontic treatment with the Twin-block appliance: a multicenter, randomized, controlled trial. Part 1: Dental and skeletal effects. Am J Orthod Dentofacial Orthop. 2003 Sep;124(3):234-43; quiz 339. doi: 10.1016/S0889540603003524.
O'Brien K, Wright J, Conboy F, Appelbe P, Davies L, Connolly I, Mitchell L, Littlewood S, Mandall N, Lewis D, Sandler J, Hammond M, Chadwick S, O'Neill J, McDade C, Oskouei M, Thiruvenkatachari B, Read M, Robinson S, Birnie D, Murray A, Shaw I, Harradine N, Worthington H. Early treatment for Class II Division 1 malocclusion with the Twin-block appliance: a multi-center, randomized, controlled trial. Am J Orthod Dentofacial Orthop. 2009 May;135(5):573-9. doi: 10.1016/j.ajodo.2007.10.042.
Nelson C, Harkness M, Herbison P. Mandibular changes during functional appliance treatment. Am J Orthod Dentofacial Orthop. 1993 Aug;104(2):153-61. doi: 10.1016/S0889-5406(05)81005-4.
Illing HM, Morris DO, Lee RT. A prospective evaluation of Bass, Bionator and Twin Block appliances. Part I--The hard tissues. Eur J Orthod. 1998 Oct;20(5):501-16. doi: 10.1093/ejo/20.5.501.
Thiruvenkatachari B, Sandler J, Murray A, Walsh T, O'Brien K. Comparison of Twin-block and Dynamax appliances for the treatment of Class II malocclusion in adolescents: a randomized controlled trial. Am J Orthod Dentofacial Orthop. 2010 Aug;138(2):144.e1-9; discussion 144-5. doi: 10.1016/j.ajodo.2010.01.025.
Chadwick SM, Banks P, Wright JL. The use of myofunctional appliances in the UK: a survey of British orthodontists. Dent Update. 1998 Sep;25(7):302-8.
Other Identifiers
Review additional registry numbers or institutional identifiers associated with this trial.
RG_16-204
Identifier Type: -
Identifier Source: org_study_id